Best Cameras Clamps in 2026

Bench dogs are an essential hold down device that should be a part of any workbench. Bench dogs will greatly improve the function of any bench. They allow securing work to the edge or top of your bench by using 3/4 inch holes. Install wherever you want simply by drilling a ¾” diameter hole.

Come in packs of 2 each. Overall length is 2-1/4 inches.

These dogs are just under 3/4 inch by 0.015 inches so they won’t bind in the hole, yet the side spring holds them in place at any desired height.

2 pack 3 inch C Clamps with 900 lbs clamping force

Power coated reinforced malleable steel jaws provide powerful and rigid clamping

Zinc plated carbon steel Acme screw turns smoothly and produces maximal clamping pressure with less effort. The screw end has a swivel pad to allow gripping of various shaped parts.

Bench dogs are an essential hold down device that should be a part of any workbench. Bench dogs will greatly improve the function of any bench. They allow securing work to the edge or top of your bench by using 3/4 inch holes. Install wherever you want simply by drilling a ¾” diameter hole.

Come in packs of 4 each. Overall length is 2-1/4 inches.

These dogs are just under 3/4 inch by 0.015 inches so they won’t bind in the hole, yet the side spring holds them in place at any desired height.

Squeeze both rubber grip ends to expand and release double wire hose clamp

Spring steel maintains pressure to hold hose securely in place

Double-Loop design has tighter grip on hose

2 each 16 inch F style clamps with quick release clutch

Overall jaw height: 3-1/4 inches; Throat or usable jaw depth: 2-1/2 inches; Jaw width: 0.750 inches

Soft grip handle size: 3-1/2 inches long by 1 inch diameter; Screw travel: 1-1/4 inches; Thread diameter: 0.375 inches

2 each 36 inch F style clamps with maximum jaw opening of 36 inches

Overall jaw height: 3-1/4 inches; Throat or usable jaw depth: 2-1/2 inches; Jaw width: 0.750 inches

Soft grip handle size: 3-1/2 inches long by 1 inch diameter; Screw travel: 1-1/4 inches; Thread diameter: 0.375 inches

Bench dogs have been used for centuries for numerous assembly tasks

Designed to be hammered into end grain to “pinch” boards together tight while glue dries

These have a square back for easy and straight driving and legs that are tapered in 2 directions

This self-centering pen blank vise allows you to firmly secure pen blanks and drill the exact center every time

Jaws open to a full 2-3/8” and will drill the middle of square blanks on the diagonal up to 1-7/8” square, making it useful for more than just pen blanks

The jaws on the drilling vice open and close together in a synchronized fashion to insure drilling in the precise center of blanks

NOT DESIGNED FOR SHOP VACS Fits standard 2-1/2” dust collection hose only

Spring steel maintains pressure to hold hose securely in place

Double-Loop design has tighter grip on hose

Pack of 15 each 2" long steel spring clamps

Maximum jaw opening 0.7 inches

Zinc plated steel

These Quick Adjust clamps are the perfect clamping solution for the woodworker, hobbyist, crafter or DIY enthusiast. The ergonomic comfort grip combined with the quick release lever make them fast and easy to get a firm grip on your work. Quickly adjust clamping/spreading force and release one-handed leaving the other hand free to support your work. The reinforced nylon jaws combined with the induction hardened I beam bars create strong clamps with an excellent strength-to-weight ratio.

Specifications: Maximum force 125 pounds, Throat Depth: 2-3/8 inch from bar to top of pad; Jaw size: 7/8 inch x 1-3/8 inch; Maximum opening capacity: 6 inch; 12 inch and 24 inch; Spreading capacity- 3/4 inch less and 6-1/4 inch more than maximum opening capacity.

Can be used single-handed in two ways – as a clamp or spreader. Simply remove the fixed jaw and move to the opposite side to transform from clamp to spreader. Spreading capacity is 3/4inch less and 6-1/4inch more than maximum opening capacity.

These Quick Adjust clamps are the perfect clamping solution for the woodworker, hobbyist, crafter or DIY enthusiast. The ergonomic comfort grip combined with the quick release lever make them fast and easy to get a firm grip on your work. Quickly adjust clamping/spreading force and release one-handed leaving the other hand free to support your work. The reinforced nylon jaws combined with the induction hardened I beam bars create strong clamps with an excellent strength-to-weight ratio.

Specifications: Maximum force 125 pounds, Throat Depth: 2-3/8 inch from bar to top of pad; Jaw size: 7/8 inch x 1-3/8 inch; Maximum opening capacity: 6 inch; 12 inch and 24 inch; Spreading capacity- 3/4 inch less and 6-1/4 inch more than maximum opening capacity.

Can be used single-handed in two ways – as a clamp or spreader. Simply remove the fixed jaw and move to the opposite side to transform from clamp to spreader. Spreading capacity is 3/4inch less and 6-1/4inch more than maximum opening capacity.

Bench dogs have been used for centuries for numerous assembly tasks

Designed to be hammered into end grain to “pinch” boards together tight while glue dries

These have a square back for easy and straight driving and legs that are tapered in 2 directions

4 pack with 2 each 6 inch and 2 each 12 inch F style clutch clamps with maximum jaw openings of 6 and 12 inches

Overall jaw height: 3-1/4 inches; Throat or usable jaw depth: 2-1/2 inches; Jaw width: 0.750 inches

Soft grip handle size: 3-1/2 inches long by 1 inch diameter; Screw travel: 1-1/4 inches; Thread diameter: 0.375 inches

This deluxe pen press allows for rapid, accurate and hassle-free assembly of pen components into the finished product. This unit will accept any pen size as well as other turned projects such as letter openers, pepper mills, bottle stoppers, ice cream scoops, pizza cutters, and more.

Aluminum plunger head and polypropylene stop will not damage parts when force is applied

Plunger has a travel of 1-3/16” and exerts a full 30 pounds of pressure

Includes pair (2 each) 10 inch clamps

Size: 10 inch; Jaw Length: 10 inch; Max Jaw Opening: 6-1/4 inch; Jaw Throat Depth: 5 inch; Jaw Thickness: 1-1/2 inch; Jaw Depth: 1-3/4 inch: Thread size: 3/8 inch

Jaws - Straight grain, unfinished seasoned hardwood

This quick-adjust vertical surface hold down clamp allows you to secure work tightly to your workbench anywhere you can drill 3/4 inch dog holes. The 1-1/2 inch long post is just shy of 3/4 inch, so will slip in and out of any 3/4 inch inch dog hole. The post has machined serrations along its length so when the handle is turned and pressure applied, the post wedges tightly in a dog hole and will not slip.

This clamp will only work with stock up to 7-1/2inch thick.

The unbreakable cast zinc base is 1-1/2 inch in diameter and 1-1/2 inch tall. The base and post are black coated to resist corrosion.