Best Anderson Metals Compression Elbow Fittings in 2026

Daisy
Last Updated: Jul 19, 2026

At a Glance: Our Top Picks for Anderson Metals Compression Elbow Fittings

Anderson Metals - 38116-12 38116 Red Brass Pipe Fitting, 90 Degree Street Elbow, 3/4" Female x 3/4" Male
#TOP1
Anderson Metals - 38116-12 38116 Red Brass Pipe
9.6
PM SCORE
Anderson Metals 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" x 3/8" Tube OD,50065-06
#TOP2
Anderson Metals 50065 Brass Compression Tube Fitting, 90
6.9
PM SCORE
Anderson Metals - 50065-04 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4" x 1/4" Tube OD
#TOP3
Anderson Metals - 50065-04 50065 Brass Compression Tube
6.7
PM SCORE

* PickSmartly editors independently research, review, and endorse the top products through comprehensive data analysis. We may earn a commission for qualifying purchases made through our product links.

Summary of the Best Anderson Metals Compression Elbow Fittings of 2026

Anderson Metals - 38116-12 38116 Red Brass Pipe Fitting, 90 Degree Street Elbow, 3/4" Female X 3/4" Male

ANDERSON METALS
38116-12
1.19 X 1.66 X 4.48 Inches
0.28 Pounds
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

Red brass pipe fitting

90 Degree street elbow

3/4-inches female pipe thread x 3/4-inches male pipe thread connection

MEASURING PIPE THREAD SIZE TO FIND THE RIGHT THREAD TYPE CAN BE CONFUSING. THREAD DIMENSIONS ARE CONSIDERED A NOMINAL SIZE AND DON'T MATCH STANDARD UNITS OF MEASUREMENT. USING THE PROPER PIPE THREAD TYPE IS CRUCIAL FOR MAINTAINING AND INSTALLING EQUIPMENT, SO HELPING YOU DETERMINE WHAT PIPE THREAD YOU NEED IS IMPORTANT TO US.

This fitting will only work with American Pipe Threads. Will not work with Hose, Compression, flare, etc.

Class 125 (150) for Steam, Water Gas, Oil and Air Service.

Pipe Threads should be tightened ups to 2 1/2 turns past finger tight. They are not meant to thread all the way.

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Anderson Metals 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" X 3/8" Tube Od,50065-06

ANDERSON METALS
50065-06
1.00 X 1.00 X 1.00 Inches
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

90-degree elbow for connecting two tubes at an angle

Female compression tube fitting for connecting to male threaded pipes

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Operating temperature range of -65 to 250 degrees F

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Anderson Metals - 50065-04 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4" X 1/4" Tube Od

ANDERSON METALS
50065-04
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Easy to disassemble no flaring tool required

Primary uses water, gasoline, oil and vacuum lines

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4" Tube Od X 1/4" Npt Male Pipe

ANDERSON METALS
50069-0404
1.10 X 1.60 X 0.60 inches
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Easy to disassemble no flaring tool required

Primary uses water, gasoline, oil and vacuum lines

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Anderson Metals - 50065-10 Brass Tube Fitting, Elbow, 5/8" X 5/8" Compression

ANDERSON METALS
50065-10
1.80 X 1.80 X 1.00 Inches
0.30 pounds
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

90-degree elbow for connecting two tubes at an angle

Compression connection on both ends

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Operating temperature range of -65 to +250 degrees F

Three piece construction – nut, sleeve and body

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4" Tube Od Male Compression X 1/4" Npt Female Pipe Size

ANDERSON METALS
50070-0404
1.42 X 0.71 X 0.69 Inches
0.02 Pounds
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

Three piece construction - nut, sleeve and body.

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Easy to disassemble no flaring tool required

Primary uses water, gasoline, oil and vacuum lines

See Pipe Thread Chart to determine Female NPT Pipe size neede

1/4" Female NPT Pipe Size has a 1/2" Thread OD

Male Compression Tube OD x Female Pipe

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" Tube Od X 1/4" Npt Male Pipe

ANDERSON METALS
50069-0604
1.20 X 1.20 X 0.60 Inches
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Easy to disassemble no flaring tool required

Primary uses water, gasoline, oil and vacuum lines

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Anderson Metals - 50069-0606 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" Tube Od X 3/8" Npt Male Pipe

ANDERSON METALS
50069-0606
1.40 X 1.20 X 0.80 Inches
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Easy to disassemble no flaring tool required

Primary uses water, gasoline, oil and vacuum lines

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Included components: 1 brass elbow with 1 nut and 1 sleeve attached

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/2" X 1/2" Tube Od

ANDERSON METALS
50065-08
1.00 X 2.00 X 2.70 Inches
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

Three piece construction - nut, sleeve and body.

USE WITH COPPER TUBING, BRASS TUBING, ALUMINUM TUBING AND PLASTIC TUBING ONLY. Not for use on pipe.

Standard fittings use short nuts

Easy to disassemble no flaring tool required - See chart for Assembly instructions.

Primary uses water, gasoline, oil and vacuum lines

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 5/8" Tube Od X 1/2" Npt Male Pipe

ANDERSON METALS
50069-1008
1.80 X 1.50 X 1.00 inches
0.02 Pounds
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68

Features

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Easy to disassemble no flaring tool required

Primary uses water, gasoline, oil and vacuum lines

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Top 10 compression elbow fittings Brands on Amazon

Here is the list of top-rated brands that were evaluated by PM.

Brand Count
Anderson Metals 10

Top 10 compression elbow fittings Brands Pie Chart


We've carried out a comprehensive analysis of 646 reviews on compression elbow fittings, using our selection criteria to identify the best options in the categories. Our findings reveal that most customers typically select compression elbow fittings priced around $8.94, with top brands including anderson metals and raindrip and lasco

Our team of expert editors reviewed these high-quality items and handpicked the top 10 compression elbow fittings for your consideration. We've also done extensive research on numerous sellers, identifying the best ones in the categories category. These include and amazon.com .

We are dedicated to assisting our users in finding the right fittings Products based on their needs, saving them considerable time when choosing which compression elbow fittings to buy. We take pride in the number of satisfied users we've helped through our thorough and insightful reviews.