Best Arctic Computer Case Fans in 2026

4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header; PWM splitter cable connects an additional fan to increase airflow in your computer case; Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans

PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans; PWM fans can spin at the same speed using software from a motherboard equipped with PWM control

CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans; 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans

【PWM fan】The PWM fan control allows for dynamic speed adjustment between 900 rpm to 2, 000 rpm, minimizing noise or maximizing airflow. Max. Air Flow: 55.2CFM; Noise: 16.3~33.5dB(A)

【RGB Lighting】RGB lighting can sync with motherboard is adjustable to match your PC build.

【Compatibility】The standard 120X120X25mm cooling fan is designed to match the cpu cooler, cpu water cooler, pc case etc..

DIGITAL A-RGB: The 12 A-RGB LEDs placed along the fan hub and the transparent rotor, with its enclosed design, provide even and rich illumination

EASY TO COMBINE: Both the fan and A-RGB cables have an integrated Y-splitter, making it even easier to retrofit and control additional fans

OPTIMIZED FOR STATIC PRESSURE: Thanks to its high static pressure, the fan guarantees efficient cooling, even with increased air resistance. Suitable for use on heat sinks & radiators

Efficient 11-blade fan design for increased cooling at lower speeds

24.2 CFM Higher airflow to enhance cooling performance. Fan Life Expectancy 35,000 Hours

Silent operation at 20 dB-A for excellent case cooling

✔️ Easy Fitment - Dimensions : 140mm(L) x 140mm(W) x 25mm(H) / 5.51in(L) x 5.51in(W) x 0.98n(H)

✔️ Excellent Ventilation - Higher air flow to enhance cooling performance and Special high profile fan blades for maximum air flow.

✔️ Long Life - Design for up to 100,000 hours life expectancy and reliability.

Astonishing lighting effects-Tri-aperture inside and outside luminous light effect,Give out an impact visual light effect.

Sync RGB lighting via motherboard: Support M/B 3 pin RGB Header (5V, Di, -, G),Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB

With EZDIY-FAB Fan Hub X and 21-key remote -You can instantly adjusting LED back-light effects, colors, brightness and Fan speed. NOTE：Maximum Current-5A, HUB-X ONLY Supports 6 Fans

Package Included: Individually Adressable Rgb Case Fan 120Mm X 5, Control Hub X1

Convex Designed Dual Addressable Rgb Ring Offered Best Lighting Effect: Convex Design Kept Rgb Lighting Effect At A Optimal Point And Left Tolerance For Other Rgb Components Such As, Mobo / Ram / Gpu, Water Cooling Components, And Ssd Plate

16.8 Million Colors & 18 Independent Controlled Leds: With Dual Ring, Total 18 Separately Controlled Rgb Leds Smoothed Out The Overall Rgb Effect And Leaves No Gaps Between Leds

GREATER EFFICIENCY: Higher Airflow; The Silent 4 computer fan is designed to enhance airflow without increasing the noise level thanks to its optimized fan blades. Minimal design provides for less noise at a higher airflow. Reduced friction and noise

INNOVATIVE DESIGN: Design of fan blades maximizes air flow and enables structured ventilation. The impeller is designed to minimize noise levels compared to similar products. The fan’s cutting-edge design delivers desired airflow and pressure

TWO WAY INSTALLATION: The fan is built to gather the warm air and bring it out of the case, while drawing cool air into your case. This significantly helps your computer reach lower temperatures and prevents it from overheating

Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.

Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.

Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.

Excellent 4 pin PWM fan power supply extension cable for PC computer atx case internal motherboard fans, make you easier diy PC computer case.

Widely Compatible: support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.

Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.

Case fan

70 mm

black

Intelligent Speed Control: 3 ×120mm PWM silent fans adopt wolf claw bionic design, greatly improve heat dissipation.The intelligent temperature control module controls the speed at 1000~2000±10% RPM.

Multi-mode Light Effect: Monochrome glow, monochrome change and rainbow effect. Each fan is equipped with 8 ARGB LED beads, 6 colors and 10 light effect modes.One click to change the RGB color.

Mainboard Sync: Support ASUS, Gigabyte, MSI main software synchronization control. Support controller and FRGB SYNC motherboard (+5V/3 PIN pin) software to synchronize two lighting control methods.

2 Ball Bearing fan for Extended Life and High Performance

Extreme Speed with Excellent Airflow

Ideal for PC CASE, POWER SUPPLY and CPU heat sink

1.Super Quiet: Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency.

2.Wide Compatibility:The most commonly 140mm size for computer case.Compatible 3-pin connector for main-board and power supply that also works with molex 4-pin headers.

3.Run Smoothly:Balanced air volume and wind pressure for excellent performance, suitable for use in chassis or cold exhaust fans.

Package included: Individually addressable RGB Case fan 120mm x 3, 400mm RGB strip x 2, control hub x1

Convex designed dual addressable RGB Ring offered best lighting effect: convex design kept RGB lighting Effect at a optimal point and left tolerance for other RGB components such as, Mobo/ RAM/ GPU, water cooling components, and SSD plate;

16. 8 million colors & 18 independent controlled LEDs: with dual ring, total 18 separately Controlled RGB LEDs smoothed out the overall RGB Effect and leaves no gaps between LEDs;

1 Four LED Colors Available: As a excellent LED cooling system, It has four LED color for customer choose: Red/White/Blue/Ice Blue, the fan can provide a very gentle and dreamlike expression by emitting soft, constant, and bright led light.

2 Features standard 140mm mounting holes :  140mm fan is a best replacement for common 140mm case fans and perfect fitment on 140mm water cooling radiators. It provides high cooling efficiency.

3 Hydraulic Bearing with Low-Noise Design：The hydraulic bearing with high quality. making fan spin at 1000RPM at low 25dBA and deliver an air flow of up to 49.8CFM

This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color).

This CPU Cooling SATA Hub is powered by SATA 15PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load.

The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out.

【Three Graphics Card Fan 】Asiahorse graphic card cooler combines three 92mm fans rotating at 1,800 rpm to carry up to 40 cfm of air flow through the radiator while being relatively quiet with noise level of only 37dBA. Enough to supply fresh air to the graphics card while staying away from the noise.

【Argb Led Frame Design】This gpu fan cooler has lighting effects that can be controlled by the 5V 3pin ASUS Aura Sync on the motherboard, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0 (Note: Do not support 12V 4 pin RGB header from motherboard).

【Swirl Blade Design】The gpu cooling fan features with a swirl fan blade construction that can reinforce and channel the airflow to provide better heat dissipation.

Excellent airflow; thanks to the technology used and 9 blades in the PC use fan 140 mm produces an enormous airflow of 73.63 m³/h and a static pressure of 0.330 mmH2O at only 600 rpm

PC L FTER QUIET: Sophisticated silent wings and an improved magnetic bearing that additionally protects against dust, ensure comfort; silent fan 140 mm yet not louder than maximum 5.71 dB (A) which operates at the H limit

Compatible and robust; designed for a long service life, can be used for all motherboards with 3 pin connection; PC fan 140 mm has a very long service life of up to 160,000 hours

2 Ball bearing for high performance with Airflow up to 110 CFM

Speed range from 500 RPM to 2000 RPM

mini 4 pin PWM connector with 3 pin to 4 pin Molex converter

【Advanced RGB Cooling Fans】Each RGB case fan is equipped with 15 pcs high-brightness LEDs, emitting a charming effect and bringing you a better visual experience. 3 pcs 120mm fans provide excellent heat disspation.

【High performance Static Pressure Blade】Newly upgraded blade design, the output airflow can reach an amazing 39CFM at 1200 rpm, ensuring silence while maximizing fan performance.

【Rubber Vibration Dampening Pads】Each 120mm fan comes with 8 soft silicone pads, which can effectively reduce the vibration generated during the work of the RGB case fan, the maximum noise is only 20.28dBA, as quiet as a falling leaf, greatly helping you to create the perfect case system.

Purpose: suitable for 3 PIN 5V / 4 PIN 12V RGB equipment

Large 4D interface for power access

Note: When wiring, please connect the arrow mark on the product to avoid reverse connection

3 Way 4 Pin PWM Fan Splitter Cable to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans; PWM fans can spin at the same speed using software from a motherboard equipped with PWM control

Each extension cable supports PWM function and speed regulation Each PWM cable extension cord is braided in flexible and sturdy black nylon to provide long-lasting performance

2 pack black fan power supply extension cables,Each fan extension cable is 12 inches long for optimum PC fan placement.

WATERPROOF COOLING FAN,For applications that require moisture and dust protection,also could be used for refresh air for your underground garage,Compouter Case,Cabinets,DIY cooling ,rv fridge or replacement of PSU &industrial Fan.

HIGHER AIRFLOW/LOWER NOISE: Updated blade and motor designs allow this to put out 45.8 cubic feet per minute with a noise level of 38.5db.can satisfied with daily cooling but not too noisy.

LONG LASTING: 12V Dual ball bearing fan give a long projected lifespan of up to 50,000 hrs--that's over 5 years. Backed by manufacturer with a 1 year warranty.

High speed 4000RPM 2 ball bearing 80mm fan

Airflow up to 53CFM at only 45 dBA noise level

Include 3 pin to 4 pin Molex converter and 4 screws

2 Ball bearing for high performance with Airflow up to 110 CFM

Speed range from 500 RPM to 1800 RPM

mini 4 pin PWM connector with 3 pin to 4 pin Molex converter

【Advanced RGB cooling fan】Each 120mm rgb fan is equipped with 15 high brightness LED beads to create a fascinating color effect and provide you with a better gaming experience.

【High performance static pressure blades】FL-120 new upgraded 9-blade design, can quickly cut air to further enhance airflow, 1200 rpm output airflow can reach an amazing 38CFM, to ensure silence while maximizing the fan airflow and air pressure.

【Rubber damping pads】Each 120mm fan is equipped with 8 soft rubber damping pads, which can effectively reduce the subtle vibration generated by the working of pc fan, the maximum noise is only 20dBA, as quiet as a falling leaf, which greatly helps you to create a perfect cooling system for your case.

Silent Fan：8 silicone pads support zero vibration of the working fans

Long Lifespan：with the advanced hydraulic bearing,fans work longer time than traditional sleeve-bearing fans

Perfect Match：9 white fan blades and 8 white silicone anti-vibration pads

Low noise level with excellent airflow

Shining surface enhances better lighting effect

Include 3 pin to 4 pin Molex converter and 4 screws

Four Macaron Colors Available: Practical design and sweet colors for sleek gaming pc case. Adorable Macaron case fan can be used to decorate your builds, desk, room, and so on to make it beautiful and attractive.

ARGB Lighting: The RGB lighting can be synchronized with the 5V addressable motherboard and can be easily installed by connecting the standard 5V 3PIN RGB header to the Motherboard ARGB header, It allows you to choose your preferred RGB lighting anytime.

Controller Free: The ARGB lights are powered by the motherboard and the fan speed is powered by the power supply. A separate powered solution provides a safe and reliable power output.