Best Juniper Networks Computer Networking Switches in 2026

DEVICE INTERFACE: 8 x 2.5GBASE-T ports (100Mbps/1Gbps/ 2.5Gbps); LED indicators

2.5G PORTS: The 8 Port network switch is equipped with 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling.

SWITCHING CAPACITY: The unmanaged switch is equipped with a 40Gbps Switching Capacity

24 x Gigabit Ethernet Ports

48 Gbps Switching Fabric

QOS-Quality of Service traffic prioritization pass-through support (802.1p QoS)

DEVICE INTERFACE: 4 x Gigabit PoE+ ports; 1 x Gigabit port; LED indicators; Wall mountable

PoE+ POWER: This network Ethernet switch provides a 35W total PoE power budget and supports up to four Power over Ethernet devices.

POE TECHNOLOGY: With PoE technology, users only need one set of cables to deliver both data and power simultaneously which reduces equipment cost by delivering data and power over existing network cables.

Share four USB peripheral devices between two computers

Easily switch devices from on computer to another with the press of a button

USB 3. 0 compliant, supporting data transfer rates of up to 5Gbps

✅【All Gigabit Ports】 This 18 ports ethernet switch includes 16 Gigabit PoE/PoE+ ports, 2 Gigabit UpLink, all ports up to 1000Mbps speed, has excellent network performance.

✅【250W High Power】 Support IEEE802.3af/at PoE standard protocal. The whole power is 250W, up to 30W per port. POE power supply is more sufficient and stable, suitable for connect multiple devices.

✅【Plug and Play】 The PoE ports support automatic detection, can connect POE and non-POE devices, such as PoE Cameras, APs, computer, nvr, router and so on. Plug and Play, no configuration required, easy to use.

The Aruba Instant On 1930 24G Class 4 PoE 4SFP/SFP+ 370W Switch is a high performance, smart managed switch designed for small and medium businesses - fast set-up, easy management, security you can trust.

Two-Factor Authentication enabled

Configuration: Rack-width design with rack mounting ears. Or place desktop or flat surface. Ports and LEDs facing the front - #ABA w/ internal power supply and US-syle plug.

Expand your home network by connecting up to five devices, including computers, printers, storage, gaming consoles and other wired devices

Get fast wired connection speeds up to 100 Mbps

Use five auto-sensing Fast Ethernet (10/100) ports for connecting your devices

Gigabit Ports: 48 gigabit ethernet ports, 2 gigabit SFP ports, switching capacity is 112Gbps, each port can reach 1G rate at the same time, with higher data throughput. 8K Mac address table, more devices can be connected and can be used in large networks

Dual Power Supply: built-in two identical power supplies form redundant backup. If one fails, the other takes over immediately, with higher reliability.

Easy to Use: Unmanaged Plug and Play, just plug in the power cord, connect the ethernet cable to your device, can be used without configuration.

Compact, sturdy design with wall-mount alternative

Multimedia streaming is made easier by ZyXEL GS-108S v3's speedy Gigabit connection

Enjoy effortless gaming and multimedia streaming through QoS ports with 3-level prioritization

【Poe switch with 802.3af/at compliant】16-Ports 10/100 switch with 4 PoE ports and 2 Uplink Ethernet, providing up to 30W per port and total PoE power budget of 300W. The 2 uplink ports can be connected to different networks or devices, such as routers, NVRs

【Unmanaged Plug and Play】Easy setup with no software installation or configuration needed,support power detection function, automatically detect devices, will not burned non-stantard PoE device or standard PoE switch

【Sturdy and Quiet】Engineered for compact convenience, it durable metal case that is easily positioned on your desktop or a wall. The fan-less design quietly integrates with your office environment and featured with good heat dissipation，safe to use in different environments from temperature -20 to 50℃

DEVICE INTERFACE: 1 x Gigabit PoE+ in port, 1 x Gigabit PoE out port, LED indicators, Durable Metal Housing, 1 x Power port (optional power adapter model name 54VDC0700 sold separately)

POE POWERED: The Gigabit PoE+ Repeater extends a single PoE/PoE+ network connection for a remote PoE or PoE+ device installation. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE (15.4W) or PoE+ (30W) device

EXTENSION RANGE: The PoE+ amplifier extends a PoE/PoE+ network connection an additional 100m (328 ft) for a total distance of up to 200m (656 ft.) from the PoE power source equipment

8-Port POE Desktop 10/100/1000Mbps Power Over Ethernet Ports.

Supports Hi-PoE (60W) on Port 1, Supports Ports 2-8 30w power to each POE port (POE+ 802.3at), Total 96W.

Layer 2 Management PoE Switch, supports MD/MDIX self adaptation.

HPE OfficeConnect 1420 series switches are ultra cost-effective unmanaged Gigabit switches, offering small businesses 10 times the performance of Fast Ethernet.

Functionality: Wirespeed Gigabit Layer 2 switching performance | administration-friendly features such as auto-negotiation | designed for high reliability, long life, and low power consumption.

Hardware: all metal enclosure | LEDs and indicators to the front and ports to the rear | all models run fanless silently | #ABA w/ US cord | Limited Lifetime warranty.

11 Ports Includes: PoE ports: (1-6) POE/POE+ (10/100Mbps), BT Ports: (7-8) POE++ (1000Mbps), UpLink ports (L1, L2) (10/100/1000Mbps) and 1 SFP slot. The 2 uplink ports can be connected to different network devices, such as routers, NVRs, etc.

Built-in Surge Protection: 6KV lightning protection per port, 8KV electro-static, surge protection, short-circuit protection, over-temperature protection, over-current protection.

High power output: Comply with IEEE 802.3af/at/bt standard, Maximum support 120W high output power, ports(1-6) single port MAX output power is 30W, ports(7-8) single port MAX output power is 60W, capable of supply high power devices such as PTZ cameras, PoE LED lights IP Speakers, etc.

DEVICE INTERFACE: 16 x Gigabit RJ-45 ports; LED indicators

SWITCHING CAPACITY: This 16-port gigabit switch has a 32Gbps switching capacity with a forwarding rate of 23.8Mpps (64-byte packet size)

DATA TRANSFER RATE: Ethernet: 10 Mbps (half duplex); 20 Mbps (full duplex); Fast Ethernet: 100 Mbps (half duplex); 200 Mbps (full duplex);Gigabit: 2000 Mbps (full duplex)

Sold as 1 Each.

5*10/100 Mbps auto-negotiation RJ45 ports obtains the fastest possible connection.

Compliant with IEEE802.3,IEEE802.3u,IEEE802.3X standard.

Use this PoE injector to upgrade your PoE network with the flexibility and features of IEEE 802.3bt (60 watts of power per line) for a small group of devices, without the expense and hassle of installing a new PoE switch.

Get IEEE 802.3bt power at a fraction of the cost. Dual Signature Active PoE means security and provides a 55 volt, 60 watt output. Power over Ethernet injector delivers 4-pair PoE++ with active negotiation to prevent accidental overpowering.

This Power over Ethernet adapter features 6KV surge protection for outdoor devices. Use it to power PTZ IP Cameras, Desktop Computers, Laptops, WiFi Access Points, LED Lighting, Base Stations, Door Locks, Display POS, and Kiosks.

Sold as 1 Each.

Gigabit Ethernet switches connect multiple devices, delivering speeds up to 10x faster than Fast Ethernet.

Plug-and-play technology.

Support 4 ports of IEEE 802.3af-compliant POE and has a total power supply of 65W to power any 802.3af compliant power device. It’s an efficient and cost-effective choice to work with wireless access points, surveillance cameras, IP phones and other POE supported devices, while getting rid of cables or power lines running around

Offers network monitoring for users to observe traffic behavior. You can easily configure it by the web-based user interface or management utility. With Port Mirroring and Cable Diagnostics features, PSE-5GP can identify and even locate connection problems on your business network.

Supports POE Power up to 30 watts for each POE port,65-watt POE budget,auto detects powered device (PD),circuit protection prevents power interference between ports

Industrial-grade switch expands Ethernet to factory floors and other environments with space constraints and wide temperature ranges. Eight auto-negotiable 10/100 Mbps RJ45 ports connect over LAN.

Industrial-grade switch supports operating temperature range of -40° to 75°C (-40° to 167°F).

Easy-to-read LEDs indicate connection and activity status for all 8 Ethernet ports

SUPERIOR PERFORMANCE: Fiber ethernet media converter has built in dual fiber or single mode module Tx1310nm with SC port to easily extend your 100 Gigabit or Fast Ethernet network up to 25km.

LED INDICATORS: Fiber to ethernet media converter has LED indicators to provide status to easily monitor network activity, compliant with IEEE 802.3 802.3u 802.3af TX, FX LINK ACT, POWER, FDX.

OPTICAL PORT: 100 Mbps Ethernet single SC connector to SC optical cable; RJ 45 port: CAT5E CAT6 10M 100Mbps Ethernet, Cat.5e or Cat.6 cable, Auto negotiation: Full or half duplex auto negotiation, MDI MDIX auto crossover.

Lossless Transmission: This Ethernet optical switch supports lossless and efficient transmission of multiple protocols. Full/half duplex self adaptive. Support self learning of media access address, support QoS.

LED Indicator: This Ethernet fast switch is designed with LED indicator to check the status of TX, FX LINK/ACT, POWER, FDX easily. Complies with IEEE 802.3i IEEE 802.3u IEEE 802.3ab IEEE 802.3z.

Self Adaptive RJ45 Ports: This SFP fiber switch provides multiple SFP optical ports and 10/100/1000M self adaptive RJ45 network ports.

Monitor Network Activity: Easy to view LEDs provide status for easy monitoring of network activity, compliant with IEEE 802.3/802.3u/802.3af. Status LEDs for TX, FX LINK, ACT, POWER, FDX allow easy monitoring of network status.

RJ45 Network Port: Ethernet media converter provides multiple Gigabit SFP optical ports and 10/100/1000M adaptive RJ45 network ports, users can choose different SFP optical modules according to site needs.

Long Distance Transmission: Supports jumbo frame size of 9K bytes; supports operating temperature range of 0°C to 60°C; when used with different types of SFP modules, the FX port can be hot swapped to extend the fiber distance to 0 to 120km.