Best Coupling Conduit in 2026

Connects type B non-metallic liquid-tight conduits to weatherproof outlet boxes, pool and spa equipment motors, central air-conditioning units and various other electrical enclosures and hubs

High-impact PVC construction

Rust and corrosion resistant

PREMIUM QUALITY - Made of high quality nylon PA66 plastic. IP68 waterproof cable gland. Wide adjustable cable range. Special design of the clamping die and rubber part, wide clamping range, strong stretching resistance, no damage to cables and devices. Fantastic for cable fixing, wire splices, machinery control boxes, distribution panels and electrical appliances etc.

WATERPROOF - IP68 cable glands come with gaskets for the bulkhead mounting. It makes the seal against the inside of the surface you're installing them on. thus they are waterproof.

WIDLY CABLE RANGE - PG19 wire glands Cable range: 12 - 16mm/0.47 - 0.63 inches. Thread O.D.: 24mm/0.95 inches. Thread length: 10mm/ 0.39 inches.

Rugged metallic construction insures mechanical protection for the raceway

Corrosion resistant zinc die cast construction

NMSC Wire - (2) #14 - (2) #10, (3) #14, or (3) #12 with or without ground

PREMIUM QUALITY - THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C,UL Rating

EASY TO INSTALL -Electrical Conduit Light weight and lower installed cost.NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule

O-RINGS and steel locknuts for indoor and outdoor use, Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction

Supports 3/4-in EMT conduit

Meets National Electric Code (NEC) standards

Snap-on type for easy installation

Supports runs of AC, MC or FMC

For aluminum or steel 14/2 - 10/2 AC and MC, and 3/8-in FMC

Zinc-plated steel construction

Superior liquid tight seal and pull out strength

Simple, quick and easy assembly

No threading of the conduit or tubing required

Made in USA. Use with Sealproof straight or right angle connectors; can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs

Sealproof Made in USA flexible PVC conduit resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial.

Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting

✔Adapt to almost all your requirements: 6 types 50pcs of NPT wire glands, there are NPT 1/4”*20pcs, NPT 3/8”*10pcs, NPT 1/2”*10pcs, NPT 3/4”*6pcs, NPT1”*2pcs, NPT1-1/4”*2pcs in our cable glands kit, adapt to almost all your requirements of work.

✔High Quality: The cord grips are Made from high quality nylon PA66 plastic, wildly use to cable fixing, wire splices, machinery control boxes, distribution panels, and electrical appliances etc .

✔Waterproof: IP68 rating allows for underwater use. Resistant to salt water, weak acid, alcohol, oil, grease and common solvents. Provide long time protection for your indoor and outdoor applications.

WIRE PROTECTION — Provides strain relief to cables and wires passing through plates or connecting to electrical equipment. Outer Drill Diameter: 0.850"

EASY INSTALLATION — Simply pass your cable through the gland and tighten the cap. Fits 0.25" to 0.47" (6 - 12mm).

PROFESSIONAL LOOK — Black nylon cable glands are used by professionals everywhere.

「MULTI SIZES」- 6 cable gland models from PG7, PG9, PG11, PG13.5, PG16, PG19, 50 pack in total, enough to meet various needs of cable connections.

「HIGH QUALITY」- Made from high-level tensile strength & toughness PA66 material, effectively resistant to UV, moisture, water and common solvency, providing long term protection for indoor and outdoor applications.

「IP68 WATERPROOF」- IP68 tested certificate cable glands come with an extra single piece of gasket, which can be used for a tighter bundle on the cable, better protecting your electrical equipment.

Superior Liquid Tight Seal And Pull Out Strength

Brand Name: Southwire

Product Dimensions: 1.0 X 0.5 X 1.0""

Excellent for managing cords for Electronics, under hood or trailer wiring

Corrugated for added flexibility

Split down the middle for wire breakout where needed

Free Shipping

3/4" 3 WAY FLAT CORNER FITTING

Heavy Duty Fitting (Galvanized Steel) with Welded Connections and Tightening Eyebolt(s)

High Quality Cable Gland Kit, Applied to Cable Fixing, Waterproof Design

Package Includes: 30pcs (6 each size)

Model: PG7, PG9, PG11, PG13.5, PG16

[ Feature ] - JACKYLED 50 pairs of black cable glands are standard M10 cable glands that can be screwed into the base of any standard lamp socket like a ceiling mount. Perfectly protecting the cable and will not easily loosened or rotated after tightening, so as to improve the service life of the socket effectively.

[ Fireproof Material ] - Made in high-quality thermoplastic polymer (PBT), 200℃/392°F high heat resistant and no fire hazard. Protect wire cord cable from ignition and keep electrical wiring in good condition.

[ Application ] - Suitable for hanging lights, pendant lights, ceiling lights, glass insulator lights for table-top and floor use as well as many other applications, include wiring fans and small appliances.

Use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure

Nylon plastic construction

Push and snap-in design

【ECO-FRIENDLY】- QILIPSU take pride in offering cable glands that not only meet your functional needs but also prioritize your health, safety, and the environment. Our materials have successfully passed the REACH test, a testament to their exceptional environmental friendliness. With our cable glands, you can have peace of mind knowing that you are using products that are not only effective but also manufactured responsibly with your well-being and that of the environment in mind.

【SUPERIOR DURABLE】- Our strain relief cord connectors are crafted from high-quality, high-tensile strength, and rigid PA66 material (nylon 66 plastic), they can withstand even the harshest environments without cracking or failing. We take pride in using 100% new raw material in our cable glands, which speaks to our commitment to quality and longevity.

【IP68 GRADE】- The washer is the most important part for IP68 grade, our washer is made of the extremely durable rubber – EPDM, can effectively block salt water, weak acid, UV, alcohol, oil, grease, common solvency, etc., provide long time protection for your indoor and outdoor applications.

Durable die cast aluminum construction.

Premium powder coat finish.

Includes NBR synthetic rubber gasket.

【PREMIUM Liquid-Tight Conduit】- Length :25'，ID：3/4inch，OD：1inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is constructed with Resists corrosion PVC to ensure quality and service life.

【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings

【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial,50% lighter than metallic conduits

‘--MATERIAL:Cable glands joint is made of nylon PA66 plastic, durable and waterproof.

‘--WIDE APPLICATION:It fits well for cable fixing, wire splices, machinery control boxes, distribution panels and electrical appliances and so on.

‘--HIGH QUALITY:Wide adjustable cable range and special design of the clamping die and rubber part combine with strong stretching resistance ensure no damage to cables and devices. It is resistant to salt water, weak acid, alcohol, oil, grease and common solvents.

Strong & Durable – The Halex EMT 1 Hole Straps are made of high-quality metal materials providing a strong and durable solution for securing EMT conduit to wood, masonry, or similar surfaces where load bearing is required. These are suitable for indoor and outdoor use.

Easy Installation - The one-hole design of these straps allows for a quick and simple installation process, saving you time and effort on your electrical projects. EMT straps are ideal for both indoor and outdoor use.

Versatile Compatibility - These straps are compatible with a wide range of conduit sizes and types, making them suitable for a variety of electrical installations and applications. Steel electroplated in zinc offers corrosion resistance.

Multi-quantity: there are 4 pieces cable connectors in the package, enough quantity to meet your replacement and using needs in daily work, better cooperate with you to finish work

Durable Material: electrical box connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat, and with the corrosion resistant zinc die cast structure

Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy

PULL SERVICE DROP CONDUCTORS: This aluminum service entrance cap from Morris Products feature a clamp-on type head that is used with rigid conduit, IMC or E.M.T. to pull service drop conductors with ease.

HEAVY-DUTY ASSEMBLY: Know that you’re getting high quality when opting for this aluminum service entrance cap that is assembled with electrical grade phenolic insulators with multiple holes.

DURABLE CONSTRUCTION: Each aluminum service entrance cap is crafted from cast aluminum and includes a heavy-duty pressure bar type clamp in body, suitable for outdoor use.

5 Models: PG7, PG9, PG11, PG13.5, PG16, Cable range: PG7 (0.12 - 0.26 inches); PG9 (0.16 - 0.31 inches); PG11 (0.2 - 0.4 inches); PG13.5 (0.24 - 0.43 inches); PG16 (0.4 - 0.51 inches)

Thread O.D.: PG7 (0.49 inches), PG9 (0.6 inches), PG11 (0.73 inches), PG13.5 (0.81 inches), PG16 (0.89 inches). Thread minimum length: 0.36 inches, maximum length: 0.4 inches

Material: Polyamide eP (Nylon PA66), Acid, alkali and alcohol resistant, Heat resistant, Flame retardant etc;Working Temperature: -40℉ - 212℉, maximum to 248℉ Package content: 25 x Cable glands (5x PG7; 5x PG9; 5x PG11; 5x PG13.5; 5x PG16))

Lantee PG21 cable gland fit for 13mm to 18mm cable range

Make of 4 parts, lock nut, main unit, seal, sealing nut, easy to use and install

Special design of clamping claw and seal, give this gland a high water proof.

Product is designed to be used in a 1/4" Hex Shank Impact Drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic.

Ground from solid 1-piece design is up to 5 times more durable than the current 2-piece conventional product.

Patented web taper increases the rigidity of the bit to decrease the potential for bit breakage

STL ENTRANCE END FITTING 2000 IVORY

For connecting 2000 with 1/2" conduit and armored cable connectors

1/2" trade size KO's on end each side and bottom

Intended for Home Theater Installations in new or retrofit work

Accepts standard-style plates with receptacles and decorator style devices with plates

Supplied with cover blanks, wall plate, cable entry device and cable connectors for unused openings

Material: Zinc die -cast; Size: 1/2 inches.

Color: Silver; Quantity: 12 Pack.

1/2" cable connectors that great for creating a strong durable links between Romex type cable and standard electrical boxes.