Best Traditional Control Knobs in 2026

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs 5-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch 20 internal thread is required

PERFECT SIZE: 2-inch diameter and 1-inch height (5.1cm x 2.5cm); T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch)

TURN COMFORTABLY: Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools

The Inner hollow potentiometer shaft diameter is approx. 6 mm (0.24 inch). Outside diameter: approx. 21 mm (0.83 inch); Total height: approx. 14.5 mm (0.57 inch).

THREE high-quality 6mm potentiometer knobs - solid brass - CNC machined. Durable and long-lasting use.

Brass knobs are for sound equipments or rotary potentiometer, for protection and easy control. The knobs have a knurled finish around their circumference.

[Adjust and Tighten]: The DCT 3 Star Knob 10 pack T Track Knobs Kit is the perfect package of screw-on clamping knobs that can be used on your saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required

[Perfect Size]: T track knob threading has 5/16-inch (6.4mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch); Knobs have a 2in diameter and 1in height (5.1 x 2.5cm)

[Easy to Use]: Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools; Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required; Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts

PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm); T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch); Bolts and washers are 1/4”-20 x 1-1/2-inch; Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads

EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track; Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required; Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts

PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm); T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch); Bolts and washers are 5/16”-18 x 1-1/2-inch; Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads

EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track; Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools

The Inner hollow potentiometer shaft diameter is approx. 6mm (0.24 inch).

Compatible with most Fender Tele, Gibson Les Paul, Strat style electric guitar or precision bass instruments.

Knurled knobs are for sound equipments or rotary potentiometer, for protection and easy control.

Constructed of a durable plastic housing and includes a precision built laser for easy measuring

Comes in a beautiful white and gray color with easy to read and operate functions

Designed for use with measuring distances of up to 32 feet in length

Keyless Keypad Entry - Add up to 10 keypad users and 10 remotes

1 remote included

Direct Replacement - No extra work on standard door prep

Measurement: Hole centers: 0.6inch(16mm);Overall length: 1.3inch(32mm). Please measure and confirm the SIZE of the gold cabinet knobs you need before purchasing.

Premium Material: The Rergy brushed gold cabinet knobs are made of high quality zinc alloy ,with brushed brass finished. The gold cabinet knobs are very sturdy and durable, easy to install.

Package Include: 10 pack gold cabinet knobs, each knob is individually wrapped to protect from being scratched, also matches two size screws (1 inch & 1.77 inch) for easy installation. Please contact us if you need other size of screws.