Best Birthday Cutters in 2026

1.Ultra-Sharp Wire Cutters: 13/16'' extra-long cutting edge can easily snips electrical wire up to 12 AWG.

2.Specialized Flush Cut: Improved blades design provide a smooth, flat and clean cut. Ideal wire cutters for Crafting, Floral wire, Electrical wire, Artificial flowers, Cable Ties, Plastic, Edge banding, etc.

3.High Hardness CR-V: Forged from chrome vanadium tool steel, heat-treated and precision ground angled head. One of the strongest 6-inch wire clippers.

Comes with inserts installed. InsertS: APKT1604, Tin Coated.

Positive rake 90Degree, right hand cut. Shank Size: R8.

Overall Length: 6-1/4". Insert Style: APKT.Insert Size: 1604

Comes with quality carbide inserts; Mills steels & cast iron

Shank Diameter Tolerance -0.0005"/+0.0000"( -0.013mm / +0.000mm); Cutting flute diameter tolerance: -0.012"/+0.012" ( -0.3mm/+0.3mm)

1 each 45Degree, 90Degree & 3/16R mills; Inserts: TNMA322, SNAM322 and RANMA322.

Right hand cut

60 degree angle 15 degree clearance

For milling roughing and finishing at high speeds and feeds

90Degree Cutting angle Nickel Plated. Screw down insert;

All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys.

Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth

1/2" Shank

3'' Overall length

Each set contains 1 each of 1/2'', 9/16'' & 5/8'' cutter with insert

T-Slot Cutters: Cutting Dia.: 16mm / 0.63"; Cutting Depth: 3mm / 0.12"; Shank Dia.: 10mm / 0.39"; Total Length: 80mm / 3.15". Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates.

Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..

Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process.

T-Slot Cutters: Cutting Dia.: 25mm / 0.98"; Cutting Depth: 4mm / 0.16"; Shank Dia.: 12mm / 0.47"; Total Length: 100mm / 3.94"; Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates.

Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..

Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process.

T-Slot Cutters: Cutting Dia.: 30mm / 1.18"; Cutting Depth: 4mm / 0.16"; Shank Dia.: 16mm / 0.63"; Total Length: 100mm / 3.94"; Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates.

Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..

Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process.

Bright finish

Woodruff Cutter

High speed steel

T-Slot Cutters: Cutting Dia.: 25mm / 0.98"; Cutting Depth: 6mm / 0.24"; Shank Dia.: 12mm / 0.47"; Total Length: 100mm / 3.94"; Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates.

Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..

Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process.

【Package Include】8pcs gear cutter(No.1-8) + 22mm R8 Milling Cutter Holder

【Specification】Gear Cutter is DP16, pressure angle is 14-1/2 degree, inner bore 22mm, outside diameter 55mm

【Cutters Gear】1#:12-13gear 2#:14-16gear 3#:17-20gear 4#:21-25gear 5#:26-34gear 6#:35-54gear 7#:55-134gear 8#:≥135 gear

T-Slot Cutters: Cutting Dia.: 25mm / 0.98"; Cutting Depth: 10mm / 0.39"; Shank Dia.: 12mm / 0.47"; Total Length: 100mm / 3.94"; Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates.

Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..

Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process.

Concave Cutters - High Speed Steel - Arbor Type - Form Relieved

Dia. Of Circle: 1 3/8 - Dia. Of Cutter: 6 - Hole Size: 1 1/4

Used to produce a true convex radius

Advantages: The well-polished surface is very clean and tidy, and there are no burrs or burrs on the handle.

GREAT PERFORMANCE: Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength.

GREAT PERFORMANCE: Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength.

Concave Cutters - High Speed Steel - Arbor Type - Form Relieved

Dia. Of Circle: 5/8 - Dia. Of Cutter: 3 1/2 - Hole Size: 1 1/4

Used to produce a true convex radius