Best Kingthai Diamond Blades in 2026

Arbor: 7/8"-5/8" bushing, Segment Dimension:37.5*10*2.5mm

Hot-pressed sintered blade: The diamond crystal grain is small, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high.

Main features: The product is 10" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal.

1 Pc of 10 inch super thin diamond saw blade with free chips for cutting

Universal for wet or dry cutting with arbor size:7/8"-5/8"

Segment height:10mm,segment thickness: 2.0mm

Universal for dry or wet cutting.

X teeth offer fast and smooth cutting.

Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you.

【Long-Lasting Diamond Blade】Our diamond blade features a high-performance alloy steel matrix with consistent diamond content and even distribution, ensuring optimized material removal and long service life. With a 10mm segment height, it guarantees extended durability even when cutting the most difficult materials.

【Superior Performance】EZARC Super thin diamond saw blade adopts X teeth design and turbo rim, which can achieve the cleanest and smoothest cutting on different abrasive materials while reducing surface chipping and side friction. It enables high-quality cutting without broken edges, even on super hard materials such as fine slate and marble.

【Universal Compatibility】The 10in. diamond masonry blade is compatible with angle grinders, bench grinders, masonry saws and circular saws. It supports both dry and wet cutting methods. Maximum RPM of 6,150.

LSS diamond blades increase the density of diamonds and use higher-grade diamonds, which have high strength and are not easily deformed

LSS granite saw blade adopts hot pressing process, combined with high-quality raw materials, to ensure the low amplitude and low noise of the product during high-speed operation

Segment height 10mm. . Arbor 5/8"-7/8". size is 10 inch 100"x.395"/10mm

DIMENSIONS - Includes 1pc 10*5/8*52T Multi-purpose TCT circular saw blade.

APPLICATION - Ideal for cross-cutting Wood Plastic Aluminum Metal Cutting. Suitable for Miter saws and Table saws.

MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts.

UNIVERSAL - 10" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Kerb. Our 10" angle grinder concrete blade can be used both for dry and wet cutting.

INCREASED OPERATING TIME - Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time.

DURABLE - Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone.

Block, Brick, Concrete, General Purpose, Pavers

Dry/Wet Use, Polished, Sintered

10 Inch Segmented Rim

Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.

Can be used wet or dry. For light or medium duty cutters.

Sintered diffusion bonded.

10 inch x 72 teeth

High performance cutting of steel roofing, metal siding, steel pipe, steel studs and more

0° hook angle reduces overfeeding, jamming, tooth breakage and kickback

10 inch super thin porcelain saw blade with free chips for cutting.

Available for cutting porcelain,ceramic tile,granite, sandstone quartz etc

X teeth offer fast and smooth cutting

★Efficient: Unique turbo mesh rim blade and X teeth provide fast, precise, smooth cutting.

★Ultra-thin: For fast cutting and low waste. These ultra-thin Reinforced turbo blades are our fastest cutting discs for hard materials.

★High Performances: Thicker center to avoid vibrations and wobbling. Stiffening flange in centre ensures straight cuts.

Ideal for cutting Non ferrous metals such as aluminum, brass, copper, bronze and more as well as plastics, Plexiglas, PVC, Acrylics & fiberglass.

Ultra sharp, hard titanium carbide. Triple Chip Tooth Grind.

Equipment use with circular saw, miter saw, table saw, radial arm saw, etc.

SUPREME GRADE - Boss Hog Supreme diamond blades use supreme grade diamond concentration offering the best possible combination of smooth, clean cuts and blade cutting life.

UPDATED MESH TURBO RIM - Newly updated rim design produces clean edges and the super thin rim of only .075" thick allows it to cut quicker than traditional tile blades. Reinforced center cuts straighter and adds stability to prevent wobble or vibrations.

APPLICATIONS - For wet cutting only on a wide range of materials including porcelain tile, ceramic tile, granite, marble, slate, terrazzo, engineered stone and all similar materials. Can also used for decorative cuts on concrete and masonry.

Size: Diameter 250mm(10 Inch), Diamond height 10mm, Segment thickness 1.8mm. Bore 25.4mm,with 2 washers of 20mm and 16mm , fits 1 inch arbor, 4/5 inch arbor and or 5/8" arbor. Grit: #60/70.

Machine: Suitable for tile saw,ect.Recommended RPM:3600. Maxmium RPM:6100. Please note whether the diameter of the product bore matches the diameter of the machine aobor.

More efficient: X mesh turbo rim segments design helps cool the segments and bring the dust out,so that it can get more efficient and better performance.

【SPECIFICATION】: 10"x.090"x.395"/10mm. Segment height 10mm. Arbor 7/8"-5/8”

【LONG &FAST CUTTING】：The diamond saw blade use high grade diamond and a premium bond matrix deliver long lasting performance. Fast cutting speed, durable and long cutting life

【SMOOTH & CLEAN CUTTING】:The slots of diamond saw blade can improve air flow, cutting dust, dissipate heat and remove slurry, maintain the cutting performance

【Specification of Tile Blade 10 Inch】Segment height 10mm. Arbor 5/8 inch - 7/8mm. Size is 10 "x 0.1 "x 10mm. MAX RPM 6100 r/min.

【Diamond Sand】The high density of emery gives the masonry blade 10 inch tip a super hardness to maximize cutting life while reducing the cost per cut.

【Wet and Dry】The wet saw blades 10 inch dry cut ensures a smooth cut, while the wet cut gives you the same feeling as cutting butter.

Diameter: 10", Arbor: DM-7/8"-5/8", Segment height: 10mm

Universal for dry or wet cutting.

Available for cutting concrete, masonry, brick, block, granite and marble.

Product Name: 10 inch lapidary saw blades, Gem stone cutting saw, Trim saw blade lapidary

Outside Diameter: 10"(250mm); Core thickness: 0.017"(0.43mm); Rim thickness: 0.022"(0.55mm)

Designed for processing materials for softer high value rocks like turquoise, gaspeite, opals

Fast cutting tile blades for smooth, chip-free cutting on tile and other stone materials

Excellent on dense floor materials.Special arbors available upon request

Fast cutting speed and long life

Compatible with the R255DCT Concrete Cutting Saw

Hot pressed and higher diamond concentration delivers 10% faster cutting and longer life than our general purpose diamond blade *Internal Testing

Engineered for aggressive cutting on both hard and abrasive masonry, hard brick, block, roof tile, pavers, stone, concrete, and steel re-inforced concrete

VERSATILE DESIGN - designed to cut the most ferrous metals such as sheet, pipe, bar or studs as well as versatile enough to cut concrete, masonry, plastics, wood

PREMIUM DURABILITY - each diamond blade is constructed with solid steel and can last many times longer than an abrasive wheel while maintaining a constant cutting depth

VACUUM BRAZED - diamond vacuum brazed segmented teeth allows for precise and efficient cutting

Wet cutting only

070" Width

Total rim height of this blade is .275"

INCLUDES 10 Inch X .100 Inch Original RED Soff-Cut Diamond Blade

SUPER fast and precise cutting of early entry concrete with no chipping or spalling

FEATURES the original RED triangular knockout arbor for Soff-Cut 150 machines and more

Hot-pressed diamond cutting blades with Hook Slot

Diamter 10"/250mm; Segments height 8mm; Segment thickness 1.6mm; Arbor: 25.4mm with a 16mm reducer washer

Laser cut hook slot on core steel, lower the noise, increase the sharpness of the blade

DIMENSIONS: Arbor 5/8", Diameter 10” ，Teeth #40，Teeth Width0.09”，Body Thickness0.07”，Front Angle7°，Max RPM 6000

DURABLE: EZee 10 inch table saw blades are made of high-quality 65Mn alloy steel, ensures excellent cutting performance .The Tungsten carbide tips braze to the saw blade through a special copper-silver bond, which lasts 10 times longer than single metal blades

All COATING DESIGNS：The electrophoretic coating used in the miter saw blade has a high temperature, corrosion, and friction resistance, which can maintain the saw blade at a lower temperature, reduce pitch accumulation, prevent corrosion and extend the service life.