Best Chop Diamond Saw Blades in 2026

7IN HIGH PERF ABRAS BLADE

7IN HIGH PERF ABRAS BLADE

7IN HIGH PERF ABRAS BLADE

Arbor: 7/8"-5/8" bushing, Segment Dimension:37.5*10*2.5mm

Hot-pressed sintered blade: The diamond crystal grain is small, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high.

Main features: The product is 10" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal.

7/8-Inch, 5/8-Inch arbor

Designed to cut fast in most tile materials

Tensioned steel core for stability

Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.

Can be used wet or dry. For light or medium duty cutters.

Sintered diffusion bonded.

Taller 12mm segments are designed for longer life and faster cutting

General purpose blade for use cutting cured concrete, block and brick

Laser welded to ensure the strongest joint possible

LSS diamond blades increase the density of diamonds and use higher-grade diamonds, which have high strength and are not easily deformed

LSS granite saw blade adopts hot pressing process, combined with high-quality raw materials, to ensure the low amplitude and low noise of the product during high-speed operation

Segment height 10mm. . Arbor 5/8"-7/8". size is 10 inch 100"x.395"/10mm

[Warm Reminder]: The installation slot of this tile blade fit with 2 arbor sizes, 5/8" or 7/8". The central ring core can be installed or removed to fit different hand-held angle grinder saws

[Wet & Dry Cutting]: The tile saw blade works on most hand-held angle grinder saws, air cut off tool and electric cut off tool with arbor size 7/8" or 5/8" , universal for dry or wet cutting

[Excellent Tile Blade]: GoYonder diamond blade comes with X teeth rim adge, offer fast and smooth cutting,1.2mm thickness runs smooth fast and quiet actually

Evolution saw blades are designed to deliver maximum performance by using the highest grade Carbide, Hardened blade Bodies, and ultra high-grade brazing techniques

All offer premium quality

Designed to increase performance..-Note: Designed for use with Evolution saws or other low RPM saws.

Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM

Perfect for slicing through fiber cement board and laminate flooring

Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts

Premium silicon carbide grain of the metal cutting blade is designed for long life and fast cutting

Proprietary material mix ensures durable long life wheels

2 full sheets of fiberglass for durability and safety

PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength.

WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials.

HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades.

1-Inch to 5/8-Inch Saw Blade Bushing

1-Inch to 5/8-Inch Saw Blade Bushing

1-Inch to 5/8-Inch Saw Blade Bushing

5/8-Inch arbor

Designed for clean cuts in most tile materials

Tensioned steel core for stability

This are knife blade

This are highly durable

This is manufactured in China

Designed to cut steel, angle iron, sheet metal and other ferrous metal products, Do not use on High Speed Saws, Swift Cut (Registered Trademark)

Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only

Blade double reinforced with fiberglass mesh for durability and safety

Diameter 7", Segment Height 3/8", Segment Thickness:1.8mm,Inner hole 7/8" or 5/8".

Wet or dry cutting.

Cooler rim increases lfie and cutting speed.

Universal for dry or wet cutting

X teeth offer fast and smooth cutting

High temperature extraction diamond blade has a long service life.

14" X 7/64" X 1" DIAMOND CHOP SAW BLADE

14" X 7/64" X 1" DIAMOND CHOP SAW BLADE

14" X 7/64" X 1" DIAMOND CHOP SAW BLADE

10 inch x 72 teeth

High performance cutting of steel roofing, metal siding, steel pipe, steel studs and more

0° hook angle reduces overfeeding, jamming, tooth breakage and kickback

【SIZE:】 Outer Diameter: 125mm (5 inch). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" or 4/5" Arbor.

【GREAT DESIGN:】 The Turbo-Mesh rim provides extremely smooth cutting finish on porcelain, marble, and ceramic tile. The Mesh rim design allows for less friction and more efficient heat dispersion.

【HIGH PERFORMANCE:】 Super thin and unique X-style teeth for high performance, offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling.

MULTIPURPOSE - 10" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind

VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone

SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts

7/8-Inch Arbor

Designed for clean cuts in most tile materials

Tensioned steel core for stability

Ideal for cutting Non ferrous metals such as aluminum, brass, copper, bronze and more as well as plastics, Plexiglas, PVC, Acrylics & fiberglass.

Ultra sharp, hard titanium carbide. Triple Chip Tooth Grind.

Equipment use with circular saw, miter saw, table saw, radial arm saw, etc.

Benchmark Abrasives 6-1/2" TCT saw blades are ideal for cutting metals such as cast iron, steel, stainless, steel, titanium, nickel, and wrought iron, etc.

Quality saw blades for metals are made from tungsten carbide teeth to fit circular saws. Specially formulated carbide lasts longer and leaves clean, burr-free cuts during cutting operations.

Our TCT saw blades are designed to meet industrial standards and offer smooth cutting performance. They are suitable to use with saws of various brands.

CONTINUOUS RIM CONFIGURATION – For clean and precise cuts wet cuts of porcelain and stone tiles

EXPERT DESIGN – The thin Kerf cutting edge eliminates chipping while cutting. The beast porcelain tile blades are engineered with a reinforced silent core hub which ensures straight cuts and reduces noise. Intended to cut porcelain,, marble, granite, an ceramic tiles

BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious DIYers, and tradesmen

CUTS MATERIAL up to 3x FASTER Very effective and fast cutting performance on all types of material including Rebar, Cast Iron, Concrete, Pavers, Tile, Granite, Laminate, PVC, And More. Cut wet or dry.

AMERICAN MADE - DEVOUR is one of the few Diamond blade brands that is still proudly MADE IN USA. We do all of our research, development, design, and manufacturing for our premium products here in America. This enables absolute control of our quality and allows us to innovate with great results & consistent success.

FAMILY OWNED AND OPERATED COMPANY We are a very diverse company, from our employees to our product, we put as much care in each individual part as we did on day 1. Our values are absolute and unwavering because we see each one of our customers, as an extension of our own family.

Industrial Quality with C6 grade carbide tip, Ideal for cutting for Steel and Ferrous Metal

Ceramic (Cer) and Metal (Met) materials tips provide maximum resistance for longer life

Electrophoretic Coating reduces the rusting and corrosion

CUTS METAL up to 3x FASTER Very effective and fast cutting performance on all types of metal including Ferrous and Non-Ferrous Metals Including Cast Iron, Rebar, Angle Iron, Steel Pipe And More. Cut wet or dry.

AMERICAN MADE - DEVOUR is one of the few Diamond blade brands that is still proudly MADE IN USA. We do all of our research, development, design, and manufacturing for our premium products here in America. This enables absolute control of our quality and allows us to innovate with great results & consistent success.

FAMILY OWNED AND OPERATED COMPANY We are a very diverse company, from our employees to our product, we put as much care in each individual part as we did on day 1. Our values are absolute and unwavering because we see each one of our customers, as an extension of our own family.

SPECIFICATION: Diameter: 4-1/2inch (115mm). Arbor: 7/8 inch and reducing ring 4/5 Inch. Thickness: 1.2mm ( 1/2 inch). Increase Segement:10mm (2/5 inch). Fit for most tile saws and hand-held angle grinders with a 7/8 inch to 4/5 Inch arbor.

UPGRADE DESIGN: This diamond saw blade is super thin and provides a precise, smooth, chip-free cutting experience for you. The X-teeth rim of the tile cutting tools can speed up the cutting speed. Thicker center to avoid vibrations and wobbling. 8 Cooling holes ensure longer service life. It can be dry-cut or wet-cut, and the cutting effect is better with water.

WIDE APPLICATIONS: This super thin tile blade is designed for cutting ceramic, porcelain tile, granite, marble, and vitrified tile, brick, sandstone. It can work as a porcelain tile blade, ceramic tile cutter, granite blade, and other thin masonry blades. It's an ideal diamond saw blade for tile installers, contractors, homemade DIYers, and tradesmen.

Wet or Dry Use

.125" Thick Segments

10mm Segment Height