Best Ford Differential Rings Pinions in 2026

wide variety of shim thickness

package dimensions: 22.86 l x 0.508 h x 15.24 w (centimeters)

package weight : 0.050 pounds

FITS the SUPER popular FORD 8.8 flange - Ratech and Allstar tool DOES NOT!!!!!

3/8" thickness steel can PROPERLY handle the immense torque necessary for this job! Other guys BEND - Ratech and Allstar are made from flimsy .250"

Includes tube tang to allow use of common ~1" tube or pipe as a handle!

Extra Strength -- Instead of soft carbon steel that strips out easily, we crafted our flange wrench with Stainless Steel. Utilize this tool to handle the insane amount of torque needed to get the job done

Compatible With -- Our pinion yoke wrench is compatible with most Ford, AMC, Dana, and GM yokes. Fits almost all pinion and companion flanges. There are multiple slotted bolt patterns for 1/4", 5/16" and 3/8" fasteners. The center socket hole is 2"

Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. For leverage, grab a 1/2” breaker bar or 3/4” drive tool

yukon ring and pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions

whether it’s on the street, off-road, or at the track; yukon ring and pinion sets deliver unrivaled performance and quality

yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up

4. 56 ratio

Fits 2011 and up Ford 9. 75"

12 bolt design

Ford 10.5" Rear

3.73 Ratio Ring and Pinion Set

Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up

yukon ring and pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions

whether it’s on the street, off-road, or at the track; yukon ring and pinion sets deliver unrivaled performance and quality

yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up

Yukon Ring and Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions

Whether it’s on the street, off-road, or at the track; Yukon ring and pinion sets deliver unrivaled performance and quality

Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up

"ford 8.8"" rear"

4.56 ratio ring and pinion set

yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up

usa standard ring and pinion sets are the right choice to add confidence to your install

usa standard gear offers a full line of ring and pinion sets for a variety of common and hard to find applications

usa standard gear offers a standard one year warranty against defects on their ring and pinion sets

yukon ring and pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions

whether it’s on the street, off-road, or at the track; yukon ring and pinion sets deliver unrivaled performance and quality

yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up

Compatible With -- Our pinion yoke wrench is compatible with most Ford, AMC, Dana, and GM yokes. Fits almost all pinion and companion flanges. There are multiple slotted bolt patterns for 1/4", 5/16" and 3/8" fasteners.

Tighten Up -- Use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. Or for setting the bearing pre-load. It can also handle other high torque tasks, like crush sleeves

Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. For leverage, grab a 1/2” breaker bar or 3/4” drive tool

yukon pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused

this kit uses timken bearings and races along with a high quality pinion seal and small parts

included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush

Experienced installers know Motive Gear and trust us for the best quality and value for OEM replacement Ring and Pinions

Engineered to the highest standards, every Motive Gear Ring and Pinion goes through rigid quality control processes in our in-house lab

For Ford

Ford 9.75" Rear

3.73 Ratio Ring and Pinion Set

Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up

1 Year Warranty

Uses High Quality Koyo Bearings and Races

Complete Installation Kit

APPLICATION -- Compatible with GM 10 and 12 bolt, for Ford 9”, 7.5", 8.8", 8”, for Dana 30, 35, 44, 50, 60, 70, 80, for Chrysler 10 and 12 bolt 8.75. (See description for fitment chart)

FUNCTION -- This makes setting pinion depth more accurate and quickly. This tool is capable to measure many other Differentals you may just need a hub.

MATERIAL -- Bulit with precision and quality in mind. Made of superior material (aluminum alloy, steel) which have an unparalleled lifespan with great durability. Designed to meet your specific needs.

Yukon Ring and Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions

Whether it’s on the street, off-road, or at the track; Yukon ring and pinion sets deliver unrivaled performance and quality

Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up