Best Inch And Metric Digital Calipers in 2026

Hardened stainless steel construction with satin chrome finish, for protection of caliper

Measures outside dimension (OD), inside dimension (ID), step, and depth (when depth bar is included)

Raised sliding surfaces to help prevent defacement and wear of scale graduations

Easy read SUPER LARGE display (2-3/8"x7/8")

IP54 - Splash water, oil and dust resistant

Hardened stainless steel body

【STAINLESS STEEL MATERIAL】The vernier caliper is made of high-strength stainless steel and is waterproof and dirt-proof. The service life of this stainless steel digital caliper is longer than that of calipers with plastic or carbon fiber parts. Powered by battery, comes with a pre-installed battery and 2 spare batteries for gift.

【ACCURATE MEASUREMENT AND ZERO SETTING】This digital caliper glides smoothly. Measuring range: 0 -6" / 0-150mm; Accuracy: ± 0.001"/ 0.02mm; Resolution: 0. 0005"/0. 01mm. At the same time, the smart design allows you to easily reset to zero by pressing a button and start a new measurement at any point on the scale, which is very suitable for differential measurement.

【4 MEASUREMENT MODES】The digital caliper has 4 measurement modes, which can be used to measure inside and outside diameter, depth, and step with two sets of jaws and a probe. Multiple measurement modes can bring more usage scenarios to people, and the measurement process is also very convenient.

【Precise & Accurate】Kynup digital caliper has a measurement range of 0 - 6''/ 0 - 150 mm; accuracy to ±0.001”/0.02mm and resolution to 0.0005"/0.01mm. Perfect and accurate caliper measuring tool for household or DIY measurement. Please choose stainless steel digital caliper for more accurate measuring.

【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button.

【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter, making all your objects measurable. 3 batteries are provided: one installed and other two as spare batteries

[4 measuring methods and safety]: Digital caliper can be used to measure inner and outer diameters, depths and steps. Multiple measurement modes can bring more usage scenarios to people, and the measurement process is also very convenient.

[Measurement accuracy]: measurement range: 0-6inch/0-150mm; resolution: 0.01inch/0.1mm; accuracy: ±0.2mm/0.01inch. A perfect and accurate caliper measuring tool,

[Inch/mm conversion]: Use simhevn digital caliper to switch freely between inches and millimeters. The switching function of the two units can meet different needs. It is more convenient and widely used for measuring the value you want.

Higher quality lower price stainless steel digital caliper with inch/metric/fraction conversion; Home DIY and professional use are both highly recommended

Fine polished stainless steel and NEW processing of depthometer's groove give better looking, smooth sliding, and accurate result

Measure Range: 0-12 inches/300mm; Display: 1/2"x1 1/2" (13mm x 38mm) extra large LCD; Accuracy: ±0.0015"/0.04mm; Resolution: 0.0005"/0.01mm, 1/128"

【Precision】Kynup digital caliper measuring tool has a measurement range of 0 - 6''/ 0 - 150 mm; accuracy to ±0.001”/0.02mm and resolution to 0.0005"/0.01mm. Perfect and accurate caliper measuring tool for household or DIY measurement. Please choose stainless steel caliper measuring tool for more accurate measuring.

【3 Units Conversion】 You can switch 3 different readings with the micrometer caliper: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital dial caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button.

【Rest Assured Quality】 The body of the dial caliper measuring tool is constructed using finely polished stainless steel with a knurled thumb roller and locking screw that ensures smooth sliding and accurate positioning when taking measurements.

Polishing finish stainless steel allows for smooth operation and precision measurement

Inch Metric Fractions, resolution: 0.0005"/0.01mm/1/128", Accuracy: 0.001" / 0.02mm

IP54 protection: water drop and dust resistant

Absolute accurate in measurements & conversions - This vernier caliper allows you get the accurate data by using internal, external, step and depth measurements in inches and millimeters. Calibrated to within 0.0005 inches or 0.01mm. Fix the faces in place and set to zero for different measurements. Adtionally fetures automatic power off.

Simple & comfortable to use - Designed for home, DIY and professional using, this tool is so simple but incredibly precise that childs can use it too. Ergonomically design provides a comfortable grab in the hand and features a large LCD display. The measuring faces adjust with a machine-grooved, knurled thumb roller that provides an easy gliding, accurate position lock for a sure adjustment. Instant conversion between readings eliminates the headache of doing your own math.

Compact, convenient & top quality - This 6 inch (150mm) caliper is small enough to fit in your pocket. As for the price? We promise our vernier calipe is crafted in hardened stainless steel with no plastic parts, stronger than other's brand. It is guaranteed against water, dirt and oil damage.

INDUSTRIAL GRADE: Different from most calipers using copper measuring sensors, our digital caliper adopts glass material sensor, which effectively prevents the accuracy of caliper effecting by temperature, humidity, magnetism, etc and greatly ensures the stability of measurement. You can easily minimize errors, save delays, and make high-precision measurements using our caliper measuring tool.

PRECISION AND ACCURACY: You can measure thickness, width or depth down to 0.001 inch with our caliper. This level of precision is required if anything needs to be correctly fitted and sealed. It allows you to make pieces that fit perfectly and leave no room for error. measurement accuracy: ±0.02mm/ 0.001 inch

LONGER USEFUL LIFE: The housing is composed of zinc alloy and the ruler of the caliper is made of first-class thickened stainless steel,Fine polished stainless steel and new groove processing on the depthometer provide a more attractive, smoother slide and reliable results.all metal construction ensures the longer spanlife of caliper

GIANT EASY-READ DISPLAY – with the absolute largest main digits available (a full 5/8” tall), makes this the easiest to see and read calipers you can buy

PRACTICAL FRACTIONS – inch-fraction mode shows no smaller than 1/64ths for real-world usability; also measures/converts to Decimal inch and millimeters

SMOOTH TRAVEL along the full 0-6” and 0-150mm hardened stainless steel ruler for consistent external, internal, depth and step measurements

【Proster Vernier Caliper】With 32 Feeler gauge Set, precise resolution: 0.0005"/0.01mm, measurement range: 0 - 6" And 0 - 150mm; resolution: 0.0005"/ 1/128"/ 0.01mm; accuracy: 0.001"/ 0.02mm, our vernier meets your accuracy requirements anytime

【32 Blades Feeler Gauge】0015"/ 0.04 mm to 0.035"/ 0.88 mm, Each Feeler gauge is laser etched with inches and millimeters for easy identification; foldable for easy take and store

【Hardened Stainless Steel Caliper】Depth-measurement blade, precise internal and external measuring jaws, polished stainless jaws for smooth sliding; smart design to prevent burrs and sharp edges

LCD DISPLAY: High-quality electronic vernier caliper with a stainless steel body; easy-to-read LCD display allows you to get precise results quickly and easily

FOUR MEASURING CAPABILITIES: These digital calipers can be used to measure inside, outside, depth, and step dimensions.

ACCURATE MEASUREMENTS: The caliper has an accuracy of 0.001"/.03mm and a resolution of 0.0005"/.01mm; perfect for the shop and household/DIY measurements

Digital, single-value readout LCD display in inch,fraction or metric units for readability

ACCURACY: Measurement Range: 0 - 12” and 0 - 300mm; Resolution: 0.0005” / 1/128” / 0.01mm; Accuracy: 0.001” / 0.02mm

HARDENED STAINLESS STEEL: Finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use

Ergonomic - The Electronic Caliper is light, comfortable, easy to use, and constructed with features that have made Starrett slide calipers the machinist's first choice for many years.

Make Measurements Easy - The large, clear, easy-to-read high-contrast LCD digital readout on this caliper makes it simple to get accurate readings quickly and easily. No squinting or straining is necessary!

Turns Off Automatically - The caliper will turn off after 30 minutes of no slide movement. A one second push of either the “in/mm or “zero on/off” button or any movement of the slide will reactivate the display with no loss of position.

【Stainless Steel Caliper】The vernier caliper is made of high-strength stainless steel, which is waterproof, dirt-proof and oil-proof. The jaws are aligned neatly and will not produce gaps, ensuring that there will be no data deviation during measurement. Finely polished steel and NEW processing of depth meters groove give better looking, smooth sliding, and accurate result.

【ACCURATE MEASUREMENT】Our digital calipers glides smoothly, Measuring range: 0 -6" / 0-150mm; Accuracy: ± 0.001"/ 0.02mm; Resolution: 0. 0005"/0. 01mm. Powered by battery, comes with a pre-installed battery and 2 spare batteries for gift.

【UNIT CONVERSION & ZERO SETTING】These Digital Calipers have a one-key button to quickly switch from inches (inch),millimeters (mm). At the same time, the smart design allows you to easily reset to zero by pressing a button and start a new measurement at any point on the scale, which is very suitable for differential measurement.

Range: 0-2.5"

3.5" jaw depth for larger rotors

Reads in INCH / METRIC / FRACTIONS

Switch between SAE (inches), metric (millimeters), and SAE fractional units

Takes measurements up to 6.1 inches in size

Resolutions of .0005 inches, 1/128 inches, or .01 millimeters provide maximum accuracy

High Accuracy: Hardened stainless steel construction vernier caliper with high accuracy for Industrial & Scientific where the highest accuracy is required. The 0-6Inch Imperial measuremant accuracy is 0.001 inch ( 0-4" (+/-.001"), 4-6" (+/-.0015") ) while the Metric measurement accuracy is 0.02mm (+/-.025mm per 300mm)

Multi Function: This metric caliper can be used to measure the outside diameter(OD), inside diameter(ID), depth, and step value of an exquisite item. Four measuring modes is ideal for different need in daily workmanship. Measurement range: 0 - 150mm ( 0 - 6 inch )

Dual Mode Reading: Designed with Imperial and Metric dual mode reading, you can read it in your preferred way within two measuring modes, inch and milimeter scale. No extra tool required and can significantly save your time

Measuring range: 0-6"/150mm; Reads in Inch/mm/Fraction

Resolution: 0.0005”/0.01mm, 1/128”; Accuracy: ±0.002“/0.05mm

Display: 1/2” x 1 1/2” (13mm x 38mm) LCD

【MEASURING RANGE】Measuring range: 0-150mm/0-6’’,Accuracy: ±0.06mm/0.002’’,Resolution: 0.01mm / 0.0005’’

【READING】Inch, fractional & metric reading

【LARGE REMOTE LCD DISPLAY】Remote readout display convenient for reading and operation

Material: Stainless steel, delicately polished, smooth and durable.

Carbide scriber / needle can easily scribe on various surfaces, you will receive 2 pcs needles (one is mounted on the caliper and the other is in the bag).

Laser engraving, clear scale, easier and more accurate readings. Metric and inch scales can meet your different needs.

DUAL Reading Scale,0mm-150mm Range, Inch/Metric 0-6’’Range 0.05/0.0078’’Resolution,1/128 Inch Accuracy

The caliper has a comfortable feel, ergonomic design, smooth pulling, excellent workmanship, and durability

Dial Caliper provides precise measurement of outside dimensions (OD) inside dimensions (ID), depth，depth and steps. Use for metalworking, woodworking, automotive, machining applications，and DIY handmade ,home use

【Digital Vernier Caliper Set】 What You Get: 1 x 6 Inch/150mm Digital Caliper, 1 x Mini Screwdriver, 1 x Custom Protective Case, 1 x Backup LR44 Battery, 1 x User Manual

【High Accuracy & Resolution】 Measurement Range: 0-6"/ 0-150mm; Accuracy: 0.001"/ 0.02mm; Resolution up to 0.0005"/ 1/128"/ 0.01mm

【Easy Read & Zero Setting】 Support Inch/ Metric/ Fraction Conversion in Large LCD Display; Zero Function Can Be Set in Any Position

Satin Chrome Calipers: Fine quality calipers made of fully hardened stainless steel with microfine black graduations on a satin chrome finish for easy and precise reading; raised sliding surfaces prevent defacement and wear of graduations

Accurate Measurements: With a jaw depth of 1.6″, these fine quality vernier calipers measure accurately in inch or metric with vernier scales of 0.001"/.02mm graduations; perfect measuring tool for the machine shop and household/DIY measurements

4 Measuring Capabilities: These calipers can be used to measure inside dimensions (ID), outside dimensions (OD), depth, and step measurements

Measuring range: Large measuring range at 0-25 mm (1 ") and the resolution is 0.001 mm (0.00005").

Spindle diameter 6.5 mm, hardened stainless steel lockers

LCD Screen: LCD with electronic digital display, easy to read.

Hardened stainless steel construction for protection of caliper components

Four-way measurement capability for multiple applications: outside diameter (OD), inside diameter (ID), depth, and step

Digital, single-value readout LCD display in metric units for readability

Measuring Range: 100 - 125 mm/ 4-5''

Auto On and Off capabilities

Resolution: 0.001 mm or 0.00005 inches

Extra-large LCD display screen

Measures from 0.001 to 6" or 0.01 mm to 150 mm

Resolution: 0.0005”/0.01 mm

Features a large LCD display, easy to take readings. Caliper comes with Storage Case and Battery.

Measures inside, outside, depth, and step from from .001" to 6" or .01mm to 150mm — convert instantly between Imperial and Metric using the "mm/inch" button

Hardened stainless steel shaft with depth-measurement probe, precision ground jaws