Best Yhtauto Electric Fuel Pumps in 2026

【Vehicle Fitment】- Universal for gasoline engine, Compatible with Motorcycle ATV (the same standard production as the original OEM)

【Installation】- Easy to fit and connect, 2 bolt fixing , 2 wire design, Every pump is tested before shipment

【Package includes & OE】- 1 x Universal Fuel Pump; 1 x Fuel Filter; Interchange part number: HEP-02A, HEP02A, OEM direct replacement, OEM specification

JDMSPEED Universal for gasoline or diesel engine, Include Socket Wire

Voltage : 12V Current : andlt;1.8A

Output Pressure : 3-6 PSI

Output Pressure : 5 - 9 PSI; Input Voltage: 12V; Output : 30 GPH. Fuse specification: 12 Amps; Crossreference : E8012S, EP12S, FD0002, P60430, 6414671

100% mechanically tested prior, ensures optimal performance and enhanced durability. Highest 12 inches fuel suction

100% Brand new and high quality, TS16949 quality system certified. Built-in German-made copper coil

Model: E8012S, Output Pressure: 5-9 PSI，Input Voltage: 12 Volt ; The product is manufactured in ISO 9000 / ISO 9001 / ISO 9002 certified facilitie.

Compatible Electronic Devices All 12 Volt Cars , Trucks , Boats & Generators

Crossreference : E8012S, FD0002, P60430, EP12S, 6414671, It features a two wire design,which can be mounted anywhere.

Electric Fuel Pump Output Pressure: 4.5-7PSI; Input Voltage: 12 Volt

Current: 1.5A; Flows: 80-85(L/h)(A); Hose Size: 5/16"; Flow Rate:90L/H

Full Copper Winding and Strong Suction to Ensure the Fuel Feeding More Stable

Works well as a fuel transfer pump

Application: Universal for carbureted applications on most 4, 6 and 8 cylinder vehicles .

Operating fuel pressure: 4-7 P.S.I.(Gasoline); Voltage: 12V ; Flows: 35(GPH); Package: Fittings*1 and mounting hardware *2 .

New Super 12S Fuel Pump. Fuel Pressure: 5-9 PSI; Flow Rates: 35GPH

5/16 inch inlet and outlet; 5/16" I.D. Hose; Must be Mounted Within 12 Inch Height of Fuel Tank

12V Electric Fuel Pump Universal Fits for Most 4,6 & 8 Cylinder Carburetor Applications

Good Up To 300 Horsepower

Reliable Solid State Design

Simple 2 Wire Hookup

Works well as a fuel transfer pump

Flow Rate Of 35 GPH; Fuel Pressure Is 4-7 PSI;

Universal Fit - Most Domestic 4,6 & 8 Cylinder Carburetor Applications

【Specification】Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).

【Compatibilty with】Electric Fuel Pump 12v Universal, fits for Trucks, Carburetor, ATV, Marine, Motor, UTV, All 12 Volt Cars, Boats, Generators, Lawn Mower

【Performance】Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, plunger-type fuel supply, suction stronger, more stable oil supply, 12 Volt Fuel Pump, two-wire design, can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere.

★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch )

★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable.

★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel

★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16" ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump.

★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch )

★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications.

𝐄𝐋𝐄𝐂𝐓𝐑𝐈𝐂 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: Model: HEP-02A; Material: Copper Clad Aluminum; Voltage: 12V; Current: 2A; Output Pressure is 3-6 psi, Pressure : 0.032-0 .045 MPA; which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel.

𝐈𝐍-𝐋𝐈𝐍𝐄 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: Fits 5/16 "Oil Pipe, 5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient.

𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍: You Will Get A Universal 12V (3-6PSI) Electric Fuel Transfer Pump + 2m/79-Inch Reinforced Fuel Pipe + 5/16-Inch Fuel Filter + 10 Hose Clamps. The kit fit all 12 Volt Cars (such as Toyota, Ford, Honda, Mazda, and any other suitable car), Trucks, Boats & Generators, Lawnmower.

This is a 12V fuel pump with fuel filter kits, universal for gasoline and diesel (exclude alcohol) engine, fit for all 12 volt cars, trucks, carburetor, lawn mower, boats & generators

Inline Fuel Pump Kit Includes: 3-6 PSI Electric Fuel Pump, 1PC Socket Wire, 1Pc Fuel Filters, 2 Meter/6.56-Foot 5/16" ID Fuel Line, 10Pcs Hose Clamp

Low Pressure Fuel Pump: Voltage: 12 Volt, Output Pressure: 3-6 PSI, Flow Reaches: 70 L/H, Hose Size: 8 mm ( 5/16 inch ), Material: Copper Clad Aluminum, Plunger-type of fuel supply; Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly

Electric Fuel Pump Output Pressure: 2.5-4PSI; Input Voltage: 12 Volt

Electric Fuel Pump Inlet & Outlet: 8mm, Internal Valving to Prevent Back Flow

Strong Suction to Ensure the Fuel Feeding of the Car More Stable

[Package Includes] The package contains a 12V electric fuel pump and a socket wire.

[Specification] In-line fuel pump, output pressure: 3-6 PSI, voltage: 12 V, andlt: 1.8A. Mounting hole distance: 2.638 inches; Pipe interface: 0.315 inch.

[Stability] The heavy-duty electric fuel pump is designed with built-in check valve to prevent backflow. It is light in weight and small in volume. Plunger type fuel supply has stronger suction and more stable fuel supply.