Best Gm Electric in 2026

CAST IRON CONSTRUCTION – durable cast-iron construction provides heavy-duty performance and withstands daily use in mobile tank applications

EASY INSTALLATION – adjustable electrical junction box rotates 180° for added flexibility while wiring and improved installation in tight spaces

LONG LIFE – thermally-protected motor prevents overheating, ensuring your pump withstands the test of time

【Vehicle Fitment】- Universal for gasoline engine, Compatible with Motorcycle ATV (the same standard production as the original OEM)

【Installation】- Easy to fit and connect, 2 bolt fixing , 2 wire design, Every pump is tested before shipment

【Package includes & OE】- 1 x Universal Fuel Pump; 1 x Fuel Filter; Interchange part number: HEP-02A, HEP02A, OEM direct replacement, OEM specification

#1 has pre-filter included - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, max flow rate: 1056 GPH, max lift height 12 feet

Durable quality - Our polished aluminum oxide ceramic impeller shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy resin encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts

Safe & easy - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our electric cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures

✅Output pressure: 5-9 PSI; Voltage: 12V; Flow Rate: 100 L/H; Current: ≤1.5A

✅Compatible with all 12V Cars, Trucks, Boats, Carburetor, Lawnmower, Generators, Forklift

✅Replaces OE: 1004-30334, 2P74019 5656980, 6414671 6472381 152-0584 69404, 6414671 EP12S FD0002 P60430 HEP-02A DW588

Limited lifetime warranty

Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part

Always be sure to check and clean fuel tank to avoid unnecessary returns

O-Ring/Gaskets included when applicable.Material:Metal

Tier 1 OE supplier for high pressure fuel pumps

100% NEW, never remanufactured

OE-proven second generation

Fits most EFI applications including turbo and supercharged

Variety of pressures and flows available, including high pressure performance

Electric Fuel Pump Output Pressure: 4.5-7PSI; Input Voltage: 12 Volt

Current: 1.5A; Flows: 80-85(L/h)(A); Hose Size: 5/16"; Flow Rate:90L/H

Full Copper Winding and Strong Suction to Ensure the Fuel Feeding More Stable

Crossreference : E8012S, FD0002, P60430, EP12S, 6414671,JZK 11001-0221 GA8012S E8012S FD0002 P60430 EP12S 6414671 US-SA-AJD-301684 a17012000ux0040 JSD-CSTK-274B

Model: E8012S, Output Presure:2.5-4 PSI,Input ,Input Voltage: 12 Volt, Current: 1-2A Flows: 70(L/h)(A),Hose Size: 5/16" Flow Rate:30 GPH

Material: Full copper winding, unlike other inferior products that are made of copper-clad aluminum material.Gasoline only, 5/16 Inch Hose Bead Type Outlet, 5/16 Inch Strainer Type Inlet

【POWERFUL WATER TRANSFER PUMP】: Voltage:115V/60Hz; Horse Power:1/10HP; Power Cord Length:6ft. Electric transfer pump can transfer water up to 264 Gallons Per Hour (4.4 Gallons Per Minute). Lift water up to 46 Feet. Stable performance will extend the service life of the water pump.

【PORTABLE AND SECURE】: Electric water pump is made of durable metal volute. Portable ergonomic handle and light weight designed for carry and storage. Metal connectors is more corrosion resistance and sturdy than plastic. Automatic thermal overload protection, ensure your safety.

【MULTI-APPLICATIONS】:Acquaer portable transfer utility pump works efficiency in aquariums, rain barrels, filling water beds, flushing water heaters, flooded areas drainage, etc. It also performs well in irragating, garden watering, car washing and other housework requirement.

✔Premium Motor - made of high grade copper coils to ensure efficient and stable operation. Heavy duty metal inlet and outlet, durable ABS housing, light weight, anti-corrosion, anti-rust with longer life

✔Universal Dimension - operation pressure: 4-7 P.S.I.(diesel); voltage: 12V; currents: 1-2A; flows: 35(GPH); inlet and outlet diameter: 5/16 inch(around 0.8cm);

✔Easy to Use & Install - please use oil filter so as to prevent the impurities from entering, and the whole product is resistant to rust. It’s vane-type fuel pump, quiet and free of noise when operation.

PORTABLE UTILITY PC2 Pump 330 Gallons per Hour. Main material: Aluminum & Steel

MAX WATER LIFT: 39FT, Length of cord: 5.9FT

ACCESSORIES INCLUDED: (1) 6 ft water hose, (1) filter board and (1) Motor brush/Impeller kit

Universal Fuel Pump Flows: 70L/h; Voltage: 12V; Output pressure: 2.5-4 PSI; Pressure: 1 MPA; Inline Fuel Pump Inlet & Outlet: 5/16 inch, Internal Valving to Prevent Back Flow

Compatible Electronic Devices All 12 Volt Cars,Trucks,Boats & Generators,Fit for Toyota,Ford,Honda,Mazda,Lexus,Infiniti,Hyundai,KIA And Any Other Suitable Car Truck,Boat,Motorcycle,Carburetor, Lawn Mower,Agricultural ATV,Generators

The function of the fuel pump is to suck the fuel out of the fuel tank, send it to the fuel supply pipe after being pressurized, and cooperate with the fuel pressure regulator to establish a certain fuel pressure.

【Sturdy And Durable】Pump and motor housing are made of heavy-duty metal. High quality cooper wire motor provides strong power and allows this mini water transfer pump to withstand heavy use. Stainless steel pump connecters, cooper hose connecters and black powder coated motor shell are stable and durable, ensuring a long service life span for the pump.

【Professional Grade】Our mini pump is ETL certified. It has a compact size but a large lifting capacity. Water transfer is up to 330 gallons per hour, and its maximum lift is up to 39 feet.

【Good Utility】Standard design of 3/4" garden hose thread connection at inlet and discharge makes the pump easy to install. The package comes with a 6ft hose and a suction attachment. The maximum particle size that can pass through the suction filter is 5mm. Clearly, see-through suction hose allows easy monitoring of pump dry-run.

✅High precision oil level sensor, chip surface with plating, accurate signal transmission, avoid running out of fuel and causing your car to break down

✅Hight quality supporting wire rod internal connection wire is strictly selected for coil resistance, high temperature resistance and flame retardant wire- longer service life

✅Metal Carin hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation

High Speed: The high-speed 3300 RPM motor delivers up to 10 GPM flow rate. Fill up your tractor's tank in a swift 43 seconds, and enjoy a 9.8 ft suction and 26.2 ft lift. Meet VEVOR's portable fuel transfer pump, designed for diesel, kerosene, and transformer oil. Do not use it for gasoline, machine oil, or other liquids.

Built Tough: Cast iron and aluminum alloy construction make this diesel pump wear-resistant and corrosion-resistant – perfect for tough outdoor conditions. The internal alloy impeller and stable high-torque motor keep it running smoothly for up to 30 minutes non-stop, ensuring efficient and reliable fuel transfer.

Nozzle Magic: Our fuel transfer extractor pump comes with an automatic shut-off fuel nozzle, making refueling a hands-free experience you'll love. Just press and release the handle switch, and the nozzle stops automatically when the tank is full. Say goodbye to constant monitoring during refueling.

【High Qulity】All metal shell including inlet and outlet. Variety of pressures and flows available, including high pressure performance.

【Technical Data】Pressure: 255 (LPH) Liters Per Hour; AMP: 20; 10mm x 1mm threaded inlet and outlet accept a variety of fittings. OE-proven second generation.Include two standard universal fittings which can connect to any 5/16 inch hose.

【Upgrade pump 】255LPH High Pressure Inline Fuel Pump are extremely popular upgrades to vehicles with engine and performance modifications, supporting up to 650 horse power.

【Introduction】:EP-014 High Pressure (5-9PSI) Universal Standard Self Priming Heavy Duty Gas Diesel In-Line In-Tank Electric Fuel Pump

【OEM】:E8012S, FD0002, P60430, EP12S, 6414671

【Adapt To】:Electronic Devices All 12 Volt Cars , Trucks , Boats & GeneratorsAnd Any Other Suitable Car Truck,Boat, Motorcycle, Carburetor, Lawn Mower , Agricultural ATV, Generators Used as booster, standby unit or as a completely independent fuel pump installation

𝐄𝐋𝐄𝐂𝐓𝐑𝐈𝐂 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: Model: HEP-02A; Material: Copper Clad Aluminum; Voltage: 12V; Current: 2A; Output Pressure is 3-6 psi, Pressure : 0.032-0 .045 MPA; which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel.

𝐈𝐍-𝐋𝐈𝐍𝐄 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: Fits 5/16 "Oil Pipe, 5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient.

𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍: You Will Get A Universal 12V (3-6PSI) Electric Fuel Transfer Pump + 2m/79-Inch Reinforced Fuel Pipe + 5/16-Inch Fuel Filter + 10 Hose Clamps. The kit fit all 12 Volt Cars (such as Toyota, Ford, Honda, Mazda, and any other suitable car), Trucks, Boats & Generators, Lawnmower.

High quality 38 mm compact design with quiet operation fuel pump (Detailed information below)

Meet or exceed OEM specifications in fit, form and function; Flow Rate: 110-120LPH @ 43PSI/12V; 140-160LPH @ 43PSI/13.5V

General installation included: 1 x Fuel Strainer; 1 x Universal connector; 1 x Rubber hose included; 2 x Stainless Steel Clamp

🏎️[IMPORTANT NOTE] Please check fuel pump assembly part finder or OEM number for the right compatibility before purchase.

🏎️[FITMENT] Compatible with 2007-2015 Mini Cooper 1.6L L4

🏎️[OEM NUMBER] E8810M,SP5095M,FP3111,FG1175,A46514,FG1994,A33243,P77067M,16112755082

Restores fast-pressure performance and system integrity, translating to better pumping through less energy

Increased durability and enhanced stability due to internal springs preventing fuel tube chafing and possible loss of fuel flow and pressure

Improved durability with steel plated, all metal internal components

【Complete Set 】 Quickly transfer diesel or light oils up to 12 GPM with this 12v DC diesel transfer pump kit, including pump, inlet and discharge hoses, nozzle and a metal strainer; the entire kit provides stable performance while delivering unparalleled suction power

【Widely Application】 This fuel transfer pump works with any low-viscosity oil to fill or empty engines, tanks, and more. Compatible with diesel, kerosene, machine oil, and transformer oil, the diesel fuel pump is ideal for filling diesel powered vehicles or engines at your garage or repair shop

【Portable Fuel Transfer Pump】 The pump is 7.5*4.3*4.7inch.2m inlet hose and 4m outlet hose. Handles make it easy to carry. The base has holes, which can be easily tied to the fuel tank hand truck trolley with ropes. Can also be placed on a platform.

【High Efficiency Motor】：The self-priming fuel pump has a 12V motor pump up to 12 GPM, a maximum suction length of 16.4 feet, and a lift of up to 32 feet for quick and easy field oil delivery. This efficient 12v fuel delivery pump does all of this with minimal noise.

【Versatile Application】：12V diesel fuel transfer pump can be widely used in farms, construction sites, industries, auto repair shops, ships, machinery, vehicles, etc.It can transport diesel oil, kerosene, transformer oil, etc.

【Safety and Reliability】：The internal bypass valve effectively protects the diesel pump motor from burning when it is clogged; it is also equipped with a metal filter that filters out impurities in the diesel fuel while pumping to protect the pump from damage.

Package list:1*12 Volt Electric Fuel Pump Model: HEP-02A The Fuel Pump is universal fit for all 12 volt cars , trucks, boats and generators, carburetor, lawnmower，which can provide optimal flow while reducing pump noise,providing lower quieter operations.

Our Fuel Transfer Pump with low pressure is running on 12v, Pressure 2.5 to 4 PSI, Flow Rate 30 GPH; Pump Flow Rate: 110-130 L/H; Current: 1 - 2 A; Hose Size: 8 mm( 5/16 inch ); Mounting Holes: 6.7 cm ( 2.64 inch ). This Electronic Fuel Pump is easy to fit and connect with 2 bolt fixing, 2 wires design that you can easily install it without much skills.

Each pump is made of top quality materials, 100% tested before leaving the factory;good working condition.With perfect metal surface trcatment - to ensure long-term corrosion;not easy to heat, wear-resistant and practical, to ensure longevity and efficiency.

Self-priming diesel transfer pump set with cast iron impeller and copper motor coil for a long lifespan.

Voltage/Power/:110V/1/3HP; Flow rate: 15GPM; Lift distance: 15m; Power Corded: 1.2m.

The inner bypass valve will effectively protects the diesel fuel pump motor from burning when clogged; it is also equipped with a metal strainer to filter out impurities from diesel while pumping, protecting the pump from damage

Water Circulator w/Universal Mount: AquatiClear by Kasco is a pump circulator, reimagined. This 1/2 HP, 120 V circulator with a universal mount produces continuous water movement to keep docks, marinas, canals, shorelines, and other watery areas free from algae, floating debris, and fetid odors.

Innovative Design: With our revolutionary Clean Current Technology, AquatiClear circulating water pump features a brand-new composite prop guard with smooth, rounded tines to ensure maintenance-free as well as continuous operation. This unique design of the circulator pump allows floating debris to slip off the guard rather than wrap around the motor shaft or prop.

Maintenance-Free: The external metal and hardware of our pumps are made with stainless steel and are protected by a sacrificial zinc anode. AquatiClear is the only circulator on the market that runs continuously without the need to clean out clogs, weeds, lake vegetation, and other debris.

Limited lifetime warranty

Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part

Always be sure to check and clean fuel tank to avoid unnecessary returns

[Package Includes] The package contains a 12V electric fuel pump and a socket wire.

[Specification] In-line fuel pump, output pressure: 3-6 PSI, voltage: 12 V, andlt: 1.8A. Mounting hole distance: 2.638 inches; Pipe interface: 0.315 inch.

[Stability] The heavy-duty electric fuel pump is designed with built-in check valve to prevent backflow. It is light in weight and small in volume. Plunger type fuel supply has stronger suction and more stable fuel supply.

Compatible models: Replacement for: Fuel Pump 422E, 428D, 428E, 432D. Fits for Skid Steer Loader: Fuel Pump 248B, 287B, 262B, 252B, 246B, 277B, 268B, 236B, 267B. Fits for Wheel Loaders: Fuel Pump 906H, 907H, 908H, 908, 906. Fits for Multi Terrain Loaders: 267B, 287B, 277B. Fits For ASV SR70, SR80, Terex PT75, PT80 Compact Track Loaders. Fits For Engines: 804C-33, 804C-33T, 804D-33, 804D-33T. Fits For Engine Industrial: 3044C, C3.4, 3000.

Replace OE Numbers: For Massey: 232/5877, 349/5327, 349/5328, 361/3869, 32A62-02010, MP10325, 228-9129, 249-7669. For JCB DIESELMAX 444: 320/07207.

Function: Effectively filter the abrasives in the fuel, such as carbon, sand, dirt and metal debris and other harmful particles. The use of a high-flow design helps reduce the restriction of the oil filter to improve engine performance.