Best Gm Electric in 2026

Output Pressure : 5 - 9 PSI; Input Voltage: 12V; Output : 30 GPH. Fuse specification: 12 Amps; Crossreference : E8012S, EP12S, FD0002, P60430, 6414671

100% mechanically tested prior, ensures optimal performance and enhanced durability. Highest 12 inches fuel suction

100% Brand new and high quality, TS16949 quality system certified. Built-in German-made copper coil

100% Brand New and High Quality (Total Copper)

Model: HEP-02A; Input Voltage: 24V; Output Pressure: 3-8 PSI; Flows: 80-120(L/h)（A)

Material: Copper (all made by copper); Cable Length: 12"/300mm; Mounting Hole Distance: 67mm; Tubing Interface: 8mm

✅【Application】Compatible with all 12 Volt Cars, Trucks, Boats, Generators&Lawn mowers

✅【Replaces OE】E8012S, EP12S, FD0002, P60430, 6414671

✅【Technical Data】Voltage:12V, Currents:1.5A, Flows:≥100(L/h)(A), Output Pressure: 4.5-7PSI

Electric Fuel Pump Output Pressure: 4.5-7PSI; Input Voltage: 12 Volt

Current: 1.5A; Flows: 80-85(L/h)(A); Hose Size: 5/16"; Flow Rate:90L/H

Full Copper Winding and Strong Suction to Ensure the Fuel Feeding More Stable

Crossreference : E8012S, FD0002, P60430, EP12S, 6414671,JZK 11001-0221 GA8012S E8012S FD0002 P60430 EP12S 6414671 US-SA-AJD-301684 a17012000ux0040 JSD-CSTK-274B

Model: E8012S, Output Presure:2.5-4 PSI,Input ,Input Voltage: 12 Volt, Current: 1-2A Flows: 70(L/h)(A),Hose Size: 5/16" Flow Rate:30 GPH

Material: Full copper winding, unlike other inferior products that are made of copper-clad aluminum material.Gasoline only, 5/16 Inch Hose Bead Type Outlet, 5/16 Inch Strainer Type Inlet

✔Premium Motor - made of high grade copper coils to ensure efficient and stable operation. Heavy duty metal inlet and outlet, durable ABS housing, light weight, anti-corrosion, anti-rust with longer life

✔Universal Dimension - operation pressure: 4-7 P.S.I.(diesel); voltage: 12V; currents: 1-2A; flows: 35(GPH); inlet and outlet diameter: 5/16 inch(around 0.8cm);

✔Easy to Use & Install - please use oil filter so as to prevent the impurities from entering, and the whole product is resistant to rust. It’s vane-type fuel pump, quiet and free of noise when operation.

Cast iron impeller and copper motor coil for a long lifespan

Power/Voltage:160W/12V; Flow rate: 10GPM; Lift distance: 10m; Power Corded: 2m

Self-priming for Diesel, Biodiesel, and Kerosene only(not suitable for gasoline)

12 GAL/MINUTE SPEED: The 260W 3600rpm motor transfers fuel up to 45L/12Gal. per minute. The cast steel impeller and sturdy copper motor for improved heat dissipation performance and extended fuel transfer pump service life.

POWERFUL PUMPING: The battery operated fuel transfer pump is OMT self-priming, rotating vane pump has a convenient on/off switch and an inner bypass valve able to lift fuel up to 32 ft. Anbull diesel tranfer pump equipped with a non-return valve to prevent fuel flow-back for improved efficiency, compatible with diesel, biodiesel, and kerosene only.

NO CORD, No LIMIT, INSTANT START : The cordless fuel transfer pump comes with a powerful and rechargeable Lithium-Ion Battery, which allows you to run for up to 30 minutes. That’s more than enough time to make around 15 times in 100L heavy duty truck (12GPM).

Universal Fuel Pump Flows: 70L/h; Voltage: 12V; Output pressure: 2.5-4 PSI; Pressure: 1 MPA; Inline Fuel Pump Inlet & Outlet: 5/16 inch, Internal Valving to Prevent Back Flow

Compatible Electronic Devices All 12 Volt Cars,Trucks,Boats & Generators,Fit for Toyota,Ford,Honda,Mazda,Lexus,Infiniti,Hyundai,KIA And Any Other Suitable Car Truck,Boat,Motorcycle,Carburetor, Lawn Mower,Agricultural ATV,Generators

The function of the fuel pump is to suck the fuel out of the fuel tank, send it to the fuel supply pipe after being pressurized, and cooperate with the fuel pressure regulator to establish a certain fuel pressure.

Portable diesel transfer Pump with Cast iron impeller and copper motor coil for a long lifespan

Voltage: 110V-120V; Power: 1/3HP; Flow rate: 15GPM; Lift distance: 15m; Power Corded: 1.2m

Self-priming for Diesel, Biodiesel, and Kerosene only(not suitable for gasoline)

★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16" ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump.

★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch )

★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications.

【Introduction】:EP-014 High Pressure (5-9PSI) Universal Standard Self Priming Heavy Duty Gas Diesel In-Line In-Tank Electric Fuel Pump

【OEM】:E8012S, FD0002, P60430, EP12S, 6414671

【Adapt To】:Electronic Devices All 12 Volt Cars , Trucks , Boats & GeneratorsAnd Any Other Suitable Car Truck,Boat, Motorcycle, Carburetor, Lawn Mower , Agricultural ATV, Generators Used as booster, standby unit or as a completely independent fuel pump installation

Self priming rotary pump with sensitive switch for precise control, electric power supply makes it very fast and convenient

The high-quality electric clip is made of all copper and is durable. The one-key lock of the waterproof power switch has a transparent waterproof cover, which is safer to use.

Designed for transferring diesel oil or kerosene for vehicle, oil warehouse, construction site, farm and outdoor work.

This fuel transfer pump works with any low-viscosity oil to fill or empty engines, tanks, and more. Compatible with diesel, kerosene, machine oil, and transformer oil, the diesel fuel pump is ideal for filling diesel powered vehicles or engines at your garage or repair shop

The pump can pump can lift oil up to 32 feet so that you don’t need to lift the barrels and tanks making for very convenient on-site transfer of diesel from barrels and drums to diesel powered vehicles and equipment.

This electric diesel fuel transfer pump has an impeller made of cast steel for durability, combined with the sturdy copper motor that provides stable performance while delivering unparalleled suction power

𝐄𝐋𝐄𝐂𝐓𝐑𝐈𝐂 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: Model: HEP-02A; Material: Copper Clad Aluminum; Voltage: 12V; Current: 2A; Output Pressure is 3-6 psi, Pressure : 0.032-0 .045 MPA; which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel.

𝐈𝐍-𝐋𝐈𝐍𝐄 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: Fits 5/16 "Oil Pipe, 5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient.

𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍: You Will Get A Universal 12V (3-6PSI) Electric Fuel Transfer Pump + 2m/79-Inch Reinforced Fuel Pipe + 5/16-Inch Fuel Filter + 10 Hose Clamps. The kit fit all 12 Volt Cars (such as Toyota, Ford, Honda, Mazda, and any other suitable car), Trucks, Boats & Generators, Lawnmower.

This is a 12V fuel pump with fuel filter kits, universal for gasoline and diesel (exclude alcohol) engine, fit for all 12 volt cars, trucks, carburetor, lawn mower, boats & generators

Inline Fuel Pump Kit Includes: 3-6 PSI Electric Fuel Pump, 1PC Socket Wire, 1Pc Fuel Filters, 2 Meter/6.56-Foot 5/16" ID Fuel Line, 10Pcs Hose Clamp

Low Pressure Fuel Pump: Voltage: 12 Volt, Output Pressure: 3-6 PSI, Flow Reaches: 70 L/H, Hose Size: 8 mm ( 5/16 inch ), Material: Copper Clad Aluminum, Plunger-type of fuel supply; Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly

Portable diesel transfer Pump with Cast iron impeller and copper motor coil for a long lifespan

Voltage: 110V-120V; Power: 550W; Flow rate: 16GPM; Lift distance: 15m; Power Corded: 1.2m

Self-priming for Diesel, Biodiesel, and Kerosene only(not suitable for gasoline)

【HIGH EFFICIENCY】--1/10 HP Self-Priming Gasoline transfer pump moves up to 3.7 gallons per min; Equipped with solid Copper Motor Windings has max suction length of 4.9 ft, lifting up to 19 ft for quiet and quick-on-site oil transfers;

【STURDY CONSTRUCTION】--The Explosion-Proof components greatly improve safety and do not produce sparks; Tough heavy-duty cast iron sealed pump chamber built to last; Thermal protection will automatic stop device when overheating; Built-in bypass to prevent the liquid from flowing back to make it more safety and conveniently

【REVERSIBLE PUMPING】--The switch futures double way function: simply press the switch to achieve reverse pumping without any movement; This pump is designed, tested and approved for use with thin viscosity petroleum fuels such as gasoline blends(up to E15),diesel fuel blends (up to B20) and kerosene.

🚚 This pumping unit is designed for pumping engine oil. The gasoline and diesel also can be pumped, but the gasoline is highly corrosive, and the residual gasoline needs to be cleaned immediately after each use, which can prolong the service life. If it is not cleaned, it can only be used twice!

🚚 The 12V Electric Fuel Transfer Pump has stable performance, wide application range, is small size,light weight, easy to install and carry, and uses on-board battery for power supply.

🚚 The advantage of the plastic tube relative to the copper tube is that it is more resistant to high temperatures and has high applicability.

⛽ Professional performance with a maximum flow rate of 60 liter per minute (16 gallons per minute), voltage: 110V AC, maximum power: 550W,works efficiently

⛽ Self priming rotary pump with sensitive switch for precise control, electric power supply makes it very fast and convenient

⛽ The high-quality electric clip is made of all copper and is durable. The one-key lock of the waterproof power switch has a transparent waterproof cover, which is safer to use.

Self-priming diesel transfer pump set with cast iron impeller and copper motor coil for a long lifespan.

Voltage/Power/:110V/1/3HP; Flow rate: 15GPM; Lift distance: 15m; Power Corded: 1.2m.

The inner bypass valve will effectively protects the diesel fuel pump motor from burning when clogged; it is also equipped with a metal strainer to filter out impurities from diesel while pumping, protecting the pump from damage

【POWERFUL MOTOR】Our self-priming diesel fuel transfer pump could pump up to 12 GPM. Max suction length is 16.4 ft, lifting up to 32.8 ft for convenient and quick-on-site oil transfers.

【CONVENIENT TO USE】Standard 12V battery connectors let you run the pump with cars, motorcycles, vans, quads and other 12V vehicles.The weight of this pump is only 7 lbs, and inlet/ outlet port fitting suits 3/4". Due to it's compact size and the handle grip, this fuel pump is very portable to carry.

【HEAVY-DUTY BUILD】3600 RPM working speed. This electric diesel fuel transfer pump has an impeller made of cast steel for durability, combined with the sturdy copper motor that provides stable performance while delivering unparalleled suction power.

【⛵ HIGH QUALITY】This transfer pump is a new model of energy-saving pump. It has a simple structure, stable function and the feature of less noise.And it is easy and safe to install, maintain and run.

【⛵ FUNCTION】This pump is of the features of reliable, easy to install and high temperature resistant. We use all copper motor to improve sealing performance, ideal for the on-site transfer of diesel.

【⛵ EASY TO CLEAN】With self priming pump and bypass valve. ON / OFF switch the pump is easy to operate, and in built filter easily accessible for cleaning.

Just released - Siphon Pro Jiggler/Shaker w/ 8' foot food grade hose - Safer and Easier to Use with Hose Retainer - ideal for water, beer & fuel

Patented hose retainer holds the far end of the hose in place so you can start the siphon with the copper jiggler - It makes a big difference when you start jiggling

Hose retainer works on buckets, gas tanks, jugs and also acts as a hose coupler

EFFICIENT MOTOR: Our diesel fuel transfer pump is equipped with a self-priming 12V motor that can efficiently pump up to 45L/min. With a maximum suction length of 16.4 ft and the ability to lift up to 32 ft, it's perfect for fast and convenient on-site oil transfers. Additionally, this high-efficient pump does all this while generating minimal noise

VERSATILE APPLICATION: This fuel transfer pump works with any low-viscosity oil to fill or empty engines, tanks, and more. Compatible with diesel, kerosene, machine oil, and transformer oil, the diesel fuel pump is ideal for filling diesel powered vehicles or engines at your garage or repair shop. Not suitable for low flammability fuel (such as gasoline, liquefied petroleum gas, alcohol, etc.)

DEPENDABLE SAFETY: The inner bypass valve effectively protects the 12v transfer pump motor from burning when clogged; it is also equipped with a metal strainer to filter out impurities from diesel while pumping, protecting the pump from damage