Best Fender Electronics in 2026

These nuts DO NOT fits metric pots or other sizes USA pots, please verify the thread type and diameter of your pots before ordering

3/8" threads will only fit most CTS pots and Switchcraft jacks (does not fit Switchcraft 3-way toggle switches)

Nuts uses 1/2" wrench; Flat washer is 5/8" outside diameter and 3/8" inside.

Made of plastic,not Metal

The tips have a cross hole which length is about 4.8mm

The tips fit USA made Oak or CRL switches with 4.8mm blades,such as USA Fender Strats, not Squier Strat switches or other switches made in Asian countries with smaller blades

Made of plastic

The tips have a cross hole which length is about 4.8mm

The tips fit USA made Oak or CRL switches with 4.8mm blades,such as USA Fender Strats, not Squier Strat switches or other switches made in Asian countries with smaller blades

KAISH brass electrosocket jackplate with brass Mono output Jack Socket; Well made with flawless finish; Great upgrade for traditional Tele jack socket

Metric thread is compatible with most import Jacks and American 3/8"-32 UNEF-2A Thread is compatible with most USA made jacks (such as switchcraft jacks); Please make sure to choose the right threaded Electrosocket Jackplate for your output jack

For Standard 7/8"(22mm) Diameter Hole; Sturdy and Reliable; The jack makes quality connections for your guitar and hold the cables in well without loose connections

Volume B50K; Pickup MN250K

Bass: +/- 10dB 30Hz B50K; Treble: +/- 10dB at 6KHz B50K

P1 should be wired with neck pickup positive; P2 should be wired with bridge pickup positive; GND should be wired with two pickups negative

Volume B50K; Pickup MN250K

Bass: +/- 14dB 80Hz B100K; Middle: +/- 8dB 900Hz B100K; Treble: +/- 23dB 3-7KHz B100K

P1 should be wired with neck pickup positive; P2 should be wired with bridge pickup positive; GND should be wired with two pickups negative

Metric thread nuts and washers are used on most import jack sockets which made in Asian countries. Please confirm the thread type of your jack sockets before ordering.

These nuts DO NOT fit USA thead jack sockets such as Switchcraft jack sockets

Nut inner diameter 8.4mm(21/64"); Outer diameter 12mm(15/32"); Thickness 2mm(5/64")

3/8" USA thread nuts and washers for most USA jack sockets, such as Switchcraft sockets

These nuts DO NOT fit Metric thead jack sockets

Nuts uses 1/2" wrench; Flat washer is 5/8" outside diameter and 3/8" inside.

KAISH quality mono barrel Jack Socket for electric guitar or bass

Fits for 1/4" (6.35mm) jacks, it's very easy to solder all of the wires with 3 pins

Made of Brass; Great improvement in connections

Metric M8 Nuts and Washers for Metric threaded Pots

Nut inside diameter: about 7.4mm

Washer inside diameter: about 8.2mm

Treble Bleed Circuit comes fully assembled for easy installation; The circuit is connected to the input and the output of your volume potentiometer.

This Treble bleed circuit is the only real solution to combat “Volume versus tone” issues. It prevents loss of high frequencies when turning down volume when installed between hot in & out of your guitar's volume pot.

Improve the sound greatly; The volume knob does not alter the tone when the volume is lowered

These switches are one of the most popular switches on the market. These switches are often used in effects pedal mods and builds, but can be used for a whole slew of applications.

Heavy duty switch with a momentary action designed to be operated by foot.

Strong durable metal contacts; Perfect for foot pedals in music applications.

These switches are one of the most popular switches on the market. These switches are often used in effects pedal mods and builds, but can be used for a whole slew of applications.

Heavy duty switch with a momentary action designed to be operated by foot.

Strong durable metal contacts; Perfect for foot pedals in music applications.

LP style electirc guitar wiring harness with metric components, direct fit for Epi LP/SG/DOT series with 2 humbucker setup; Standard model comes with quick connectors on toggle switch cable

Very easy to install, all you have to do is solder your two pickups signal wire on the two volume B500K pots and ground wire to the back housing of the same pots; Please verify our diagram for wiring

Comes with 500K full size potentiometers (2*A500k on Tone positions and 2*B500k on Volume positions) with .022uF capacitors and 1/4" Output Jack

KAISH well designed and well made adjustable brass roller nut

Solid brass and Durable; Dimensions: 43mm(length) * 7.2mm(width) * 8mm(height); E to E string 36mm; Please make sure the dimensions are correct for your project

Very easy to install with pre-slotted; Brass materials supply a nice smooth sustain

KAISH well made Titanium Alloy adjustable guitar nut with flat bottom and solid connection to the neck (screws are made of stainless steel)

Resonate very nicely and supplies more overtones with a richer sound; Easy adjustment for different strings sizes and step down tune

Dimension: 42mm (Length)*5mm(Width)*8mm(Height); E to e string Spaing: 36mm