Best Generic Emblems in 2026

Great Size: 3.15inch*1.96inch

Anti-rust Material: Made of high quality aluminum alloy. Never rust! Never Fade!

Easy installation: No Extra tool needed.Install it in 1-2 minutes.

🚗【Material】FJB car decals are made of high-quality aluminum alloy materials. High-quality alloy materials can withstand various weather conditions. It is not only waterproof, but also rust-proof. It is more durable than other plastic car signs on the market.

🚗【Easy to install】No tools are needed, and it can be installed quickly in 2-3 minutes. ①Clean and dry ②Peel off and paste ③Short press to make sure the 3M glue of each part is firmly adhered.

🚗【Applicable Models】Exterior car stickers are suitable for most models, such as golf carts, SUVs, MPVs, RVs, motorcycles, and can also be used for daily necessities such as laptops and refrigerators. FJB truck stickers can be used on doors, trunks, tailgates, grills, or as art toolboxes.

Measures Approximately 4-inches by 3-inches

Easy Application with Full Auto Adhesive Backing

UV Protected and Boasts a Durable Color Finish

Each order Includes 2 Flag Badges (one USA Regular Orientation and one USA Reverse Orientation)

Made of High-Grade Aluminum alloy Material , each Flag is 5 inches x 3 inches,they are not thin Vinyl Decals!

three-dimensional effect, beautiful, easy to install.

👎🏻【Superior Material】The car bumper stickers are made of high quality aluminum alloy material, waterproof and rustproof, compared with plastic material, our car stickers are stronger and more durable.

👎🏻【Wonderful Size】Our package includes 2 bumper stickers along with super strong 3M adhesive. Each car sticker is 3.15 X 1.97 inches, the perfect size can can add a perfect logo to your car and grab the attention of other drivers.

👎🏻【Easy to Install】It only takes 2-3 minutes to install, no tools required. First clean and dry the surface of your car, then peel and stick, finally press for a few seconds to make sure each part of the 3M adhesive is firmly adhered.

Heavy duty, Made of Aluminum, Embossed.

Includes two (2) American Flag emblems (1 Forward and 1 Reverse).

Emblem Size : 3.15"x 2" (50mm x 80mm). Thickness: 3mm. Comes with 3M adhesive back for stick on.

1.Only 1 minutes to makes the truck Stand Out a little more! not need any tools, just peel and stick it on the vehicles (The car front grille). Tips : Be sure to thoroughly clean the surface to assure longevity of the adhesive before applying

2.Made from a durable aluminum plate with protective UV coating for long lasting bright colors. Once If you want to remove the paint, WILL NOT be damaged and will not leave any unwanted residue or stains

3.Universal fits for most car

[Suitable for Most Cars]:This emblem nameplate badge fits for F-150 2004-2014 (Without Rear View Camera), F-250/ F-350 2005-2007, Edge 2011-2014, Explorer 2011-2016, EXPEDITION, RANGER,Etc.

[Front Grille Emblem]:It's a oval front emblem 9" x3.5",the outer pin is 0.75" tall and the center pin is 0.625" tall.Please check the size of the original emblem to confirm whether the emblem is suitable for your vehicle.

[Easy Installation]:The emblem nameplate badge has self-adhesive tape on the back, no drilling required. Remove your old emblem, make sure the surface is clean to assure longevity of the adhesive before applying.

Made with corrosion resistant aluminum

Dynamic 3D emboss and vibrant color finish

Easy application with full auto adhesive backing

Includes (1) German flag emblem badge with L shaped mounting bracket for the front grille and adhesive double sided tape

Made from a durable aluminum plate with protective UV coating for long lasting bright colors

Emblem measures at 2.75 x 1.25 x 0.15 inches

Made of Aluminum, Embossed. Thickness: 1mm..

Includes two (2) American Flag Auto Emblems (1 Forward and 1 Reverse). Hand polished and Black Glossy/Matte finish.

Comes with clear plastic shrink-wrap protecting the surface. (The protective plastic shrink-wrap needs to be removed after installation).

Heavy duty, Made of Solid Aluminum, Embossed.

Includes two (2) American Flag emblems (1 Forward and 1 Reverse).

Emblem Size : 3.15"x 2" (50mm x 80mm). Thickness: 3mm. Comes with 3M adhesive back for stick on.

Made with corrosion resistant aluminum

Dynamic 3D emboss and vibrant color finish

Easy application with full auto adhesive backing

2-Pack. Made of Aircraft Aluminum, Embossed. Flexible.Thickness: 1mm.

Hand polished and Black Glossy/Matte finish.

UV Resistant. Durable enough to last under all weather conditions.

Made of Aircraft Aluminum. Embossed, Black Glossy/Matte finish.

UV Resistant, Durable enough to last under all weather conditions.

Emblem Size : 7"x4" Thickness: 0.039" (1mm).

🚗【Material】This Limited Emblem Made of high quality Aluminum Alloy material,100% waterproof.Size: 5.5 * 0.78 inch （14*2cm）

🚗【Easy Install】Waterproof &looks creative and cool,3M adhensive tape,just need tear up easy to install:Select the location-clean it-dry it-tear off the double-sided adhesive protective film-press hard on the Limited badge and hold for few seconds.Aslo removable if use a hair dryer.

🚗【Ensure the place to paste】 dry, clean, no oil, no wax in the water for three days;and no washing for car within 48 hours.

Made with corrosion resistant aluminum

Dynamic 3D emboss and vibrant color finish

Easy application with full auto adhesive backing

★ [17520 Hours Stick Test] ★ – Double sided automotive emblem tape also known as two way face car molding emblem tape for auto, truck, marine has gone stick test 17520 hours before enter market. Testing on adhesive, heavy dutymounting, highstrength, stick strong, heat proof, melt resistant, humidity and wearherstrip adhesive. Higher grade double sided tape heavy duty emblem automotive is liner removable friendly, waterproof, weatherproof, extreme super strong glue self adhesive and odorless.

★ [Strong & Heavy Duty on Steel] ★ - Two way tape double sided heavy duty automobile emblem is best adhesion on steel industrial standard attachment tape strip with double-sided rubber pe foam both sides. Average weight 5.5lbs. Automotive bonding attachment heavy dutymounting two way tape for car vehicle truck deco, body trim emblem, side door trimming, windows louver, car badges and logos, car spoiler. It sticks on steel (best adhesion), plastic, aluminum, brick wall, acrylic, glass etc.

★ [Heat proof 100°C/ 212°F & Waterproof] ★ - 2 way mounting tape two sided automotive emblem tape is high temp weatherproof extreme strong stick standing water, heat resistance up to 100 °C/ 212 °F. It's suitable in hot, cold weather, raining, summer season. Double-sided mounting tape automotive is 2 sided heavy dutymounting grade, waterproof, melt resistant, extreme highstrength self adhesive for indoor, outdoor decoration, car, truck moulding trimming stick permanent interior and exterior.

Features Unique State Specific Graphics

Made with Corrosion Resistant Aluminum

Dynamic 3D emboss and vibrant color finish

Weather-proof

Aluminum Alloy

Metal

These emblems replace the Hood Emblem 82mm (3.25 inch) and Trunk Emblem 74mm (2.9 inch) , which is the size used on the hood and trunk.X3 X5 X6 3 4 5 6 7 8 Series 325i 328i E46 E30 E36 E34 E38 E39 E60 E65 E90 All Models.

Easy to Install,Remove film/plastic cover before installing this badge.Remove the old badge and attach the new badge to it.

DIY manual installation,bring the fun of modification, make your car look new and feel more comfortable.The emblem is made of high-impact ABS and Aluminum which are waterproof and anti-rust.

Material: Aluminum alloy ；Size: 118 * 23 mm/ 4.6" * 0.9" ；According to customer feedback,Upgrade the surface plating process,Never Fade & Water Proof

Easy to decorate,3M tape on back,Do not need extra glue and other items

Exquisite detail workmanship , Lift the overall shape of the car logo styling.Super three-dimensional sense , Visible thickness and texture, all-metal material

One piece of front grill Emblem Badge

Style: Black/White UK Union Jack flag, Diameter: 3.05 inch

Made with high quality Aluminum

1 piece

Made with aluminum plate with UV coating for long lasting

Perfect for the car front grille, side fenders, trunk, dashboard steering wheel, etc

Compatibility: Fit for F-150 2004-2014, F-250/F-350 2005-2007, Explorer 2011-2016, Edge 2011-2014,EXPEDITION,RANGER,etc. If you find it cannot fit for your car after receiving, please be free to contact Amazon service team to return.

Used for front grill or tailgate: Size of emblem: 22.8 X 8.9 CM/ 9 X 3.5 INCH. The outer pins of back are 0.75inch and center pin is 0.63inch. This emblem is installed by 3M tape, so you just need to confirm the pins can be inserted to your car.

ABS and aluminum material: This emblem made of high performance ABS and Aluminum, so it has the characteristics of waterproof, anti-corrosion, toughness and firmness. Surface bright clear gloss resin paint make it smooth and delicate to show the wonderful color.

1.Each order Includes 3 Flag Badges .

2.Made of High-Grade Aluminum alloy Material , each Flag is 3.22 inches x 1.7 inches(82mm*45mm),they are not thin Vinyl Decals!

3.Easy to use, just clean the surface, peel the sticker and stick to the surface of car, press for few seconds to make it firmly.

Product name: custom Peterbilt car truck emblem badge

Compatible Vehicles: For F150 2004-2014 year

This emblem is aftermarket product for replacement,refer to factory part number is 4L34-15402A-CA

Material: Aluminum alloy; Size: 146 * 18mm; Quantity: 1 pair ( left and right )

Emblem is designed to last for years, Never Fade & Water Proof & Self Adhesive!

Easy to install, No tools needed. can be applied to any clean flat surface -vehicles, car doors, car body ,car side fender ,car rear trunk , etc

Officially licensed

Easy to apply

Light weight aluminum

Made of Aircraft Aluminum. Embossed, Black Glossy/Matte finish. Forward and Reverse set.

This is a high quality weather-proof metal emblem.

Emblem Size: 5"x3" . Thickness: 1mm..