Best Fan Electric Controls in 2026

【Universal version, wide replacement】 AUOMII universal ceiling fan remote controls kit compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known ceiling fan brands. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one.

【Small Size】 Small Size receiver, fit for your mini fan. Just need narrow space to install the receiver into your fan canopy. However, it is not suitable for all the fans although the receiver is really small size, please check the room of canopy before order.

【Beep On/Off Setting】 The BEEP can be turned on or off through remote. You can change the beep status in any time if you want. The default setting is beep on.

【Small Size】: Small Size receiver, Fit for your mini fan.This ceiling fan remote kit is specifically works with almost 98% regular ceiling fans, such as Hampton Bay, Harbor Breeze fans, Westinghouse, Honeywell and Others well-known brands

【4-IN-1 Multi-FUNCTIONS】: Include 4 separate buttons for Fan control :3-speeds (High/Medium/Low) and OFF; 4 separate buttons for Timing remote setting and control: 1H, 2H, 4H, 8H; 1 button for light ON/OFF control (no dimming).

【BEEP ON/OFF SETTING】: Press and hold "STOP" button in remote can turn on or turn off the beep. The default setting is beep on. You can turn on or off the beep in anytime.

【UNIVERSAL VERSION】 The smart WIFI Ceiling Fan Remote Control Kit works well with the most ceiling fans like Hunter, Harbor Breeze Westinghouse Honeywel and Others well-known brands. Just few steps to convert your traditional fan and light into a smart wifi controllable one with this wireless fan controller kit.

【SMART WIFI VERSION】 3 ways to control the ceiling fan: Remote, APP, and Voice command. there is always one way for you. Compatible with Alexa and Google Assistant. Control and monitor the fans from anywhere with your smartphone using free Smart Life App.

【NEW TECHNOLOGY & SMALL SIZE】 Soft switch and Zero cross switch technology. No time delay, No switch electric arc, No lifetime limit. New technology make the wifi ceiling fan remote controller kits to be more safe and long lifetime. Super Small Size. You just need small space to install the unit into fan canopy.

Adjustable turn-on temperature from 150-240 degree farenheit

Turn-off temperature is preset at 10 degree farenheit below turn-on temperature

Thread in 3/8 inch NPT probe

Senses coolant temperature and sets fan speed 60-100 percent for better cooling control

Directs fans to run for 30 seconds after vehicle is turned off

Reduces charging spikes and current load on charging system

185 degree Fahrenheit preset thermostatic fan control

For use with Rapid-Cool and super duty electric fans

Probe installs in to radiator fins

Trimatron full-range fan speed control

Rotary-style dimmers feature design that fits in tightest single-gang wall boxes

Built-in radio and TV interference filter

Fit For Router Fan Electric Motor Rheostat Variable Speed Controller AC 1500W / 120 volt / 15 amps

For use with brush type motors only, Will not work with brushless type motor or soft/slow start motors,Use with centrifugal fans only

Pls confirm the item if it matches your car before you purchase

This listing is For Router Fan Variable Speed Controller Electric Motor Rheostat AC 120V Newest

Three settings include off, on (full) and variable. Simple use the dial to increase or decrease fan motor speed. 120 volt/15 amps.

For use with brush type motors only.

Brand New Radiator Fan Control Controller Module w/Heat Sink (1C232-19700)

Replaces OE 1355A124, 1C232-19700, AJY215SC0, AJ511515YA

See Compatibility Chart To Verify Your Specific Vehicle Year, Make, & Model

The PAC-2800BT was designed for the ultimate in flexibility and to be a simple add-on in any application using an electric fan. Included is a 70amp relay, enough for even the most power hungry of cooling fans. Fully programmable, the PAC-2800BT will work with your existing water temp gauge, operating from the temperature sending unit already installed. A dedicated sending unit can be installed for applications without a water temp gauge.

ompatible with single fan, dual fan or single two-speed fan applications.User-settable on and off temperatures.** 70A relay included, additional relay is available for purchase separately; RLY-1 (0-30 amp) or RLY-3 (0-70 amp). The use of a second relay RLY-1 (0-30 amp) or RLY-3 (0-70 amp) will be required for dual fan or two speed fan operation (not included, sold separately).

User-settable on and off temperatures. The PAC-2800BT features fully programmable "fan on" and "fan off" temperatures to suit any application or personal preferences. The PAC-2800BT offers a full digital LED readout for displaying temperature readings and maintaining simple installation. A second relay is required for dual fan or two speed fan operation, sold separately.

A failing HVAC auxiliary fan control module can lead to engine overheating and costly damage

URO's direct-fit OE replacement design instantly restores factory HVAC auxiliary fan control module function

Easy plug-and-play connection

Integrated design (built-in electrolytic capacitor), completely waterproof and dustproof, adapt to various climatic environments, IP68; Waterproof and dustproof, suitable for all-weather competition.

High quality materials, strong current resistance and strong BEC output capacity, surpassing other competitive products. The external fan of aluminum alloy radiator is convenient for heat dissipation.

The switch is used to set the electric regulation parameters, which is simple and clear, and has multiple protection functions such as lithium battery low-voltage protection, over temperature protection, throttle signal loss protection and so on.

Compatible with 120V or 220V power input, 15A maximum current, the output voltage is 0-120V when the input is 120V, and the output voltage is 0-220V when the input is 220V.

Suitable for excitation motors, power tools and resistive loads, such as fans, hand-held routers, electric kettles, electric stoves, electric soldering irons, etc.;

The maximum power of connecting inductive loads (such as fans and routers) is about 1500W, and the limit power of connecting resistive loads (such as electric furnaces, heating wires) is 4000W;

YHTAUTO Affordable and Prime HVAC Blower Motor Resistor, Directly Fit

Fits Mazda 5 2007-2010 2.3L Mini Passenger Van, CX-7 2007-2009 2.3L Sport Utility

Fits Toyota Corolla 2009-2013 1.8L/2.3L Sedan; Matrix 2009-2013 1.8L, 2011-2013 2.3L Station Wagon

Oem Number: Reference OEM 1355A124, AJ511515YA, AJY215SC0, AJY215SCO, L3361515YA, direct replacement part for the old one, for stable performance and durable.

Fitment Compatibility: Fit for Mazda 6 MPV Outlander Lancer. After installed, enjoying fan system working more stable when you driving.

Installation Tip: Turning off the engine, replace the new cooling fan module after the water in engine radiator cooled to the room temperature; Avoid the external high heat source after installation; Avoid sprinkling water on surrounding auto parts during the installation.

【Compatibillity】-The Electric Cooling Fan Wire Harness Kit Fit for GM 1999–2006 ECU Control.

【Replace OE Part Number】-Cross Reference Part Numbers: 7L5533A226T, please check OEM part number and compatibility to ensure you purchased correct items!

【High Quality Material】-Made of durable corrosion and dust resistant material. 100% tested and meets or exceeds OEM specifications.

Replacement for Router Fan Variable Speed Controller Electric Motor Rheostat AC 120V

Use with centrifugal fans Only

Replacement for use with brush type motors Only

Product Name: Router Fan Electric Motor Rheostat Variable Speed Controller AC

Current Capacity: 15A

Voltage Capacity: 120V AC/60Hz

FULL POWER ALL THE TIME: The HHQ AFM/DFM Disabler allows your V6 or V8 GM vehicle to run in full cylinder mode at all times, preventing the Active Fuel Management system from dropping cylinders.

Compatible with V6 / V8 General Motors (GM) active or dynamic fuel management vehicles, includes cars, trucks, and SUVs.

PLUG & PLAY INSTALLATION: Simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM/DFM system.

【Perfect Compatible】The Cooling Fan Module is fits for Ford FOCUS 2013-2018.Replacing numbers for reference: 1137328464, 1137328567.Detailed application model, please check carefully before purchasing.

【Quality Guaranteed】If you have any question or any unsatisfactory about the product , please do not hesitate to contact us , we do must help you solve the issue well . When we received it,we will deal with it as soon as possible.

【Easy to Install】--- User-friendly design with no additional adjustments. The old or broke Fan Control Module can be replaced directly, which is convenient and reliable to use and easy to assemble and disassemble.

High Idle Control Kit

Package Dimensions: 22.098 L x 5.588 H x 16.51 W (cm)

Includes Wiring Harness/Terminal/Loom/Tie Wrap/Mini Fuse Tapper/Decal

♕【Technical Parameter】Input voltage: AC 100V-120V; Input max current: 15amps; Continuous current: 8amps; Resistive load: 2000W max; Inductive load: 1000W max

♕【LED Display Screen】Show the real-time output voltage, make the machine working voltage visible

♕【15A Overload Protection Switch】The switch will power off automatically when momentary current is over 15 amps to protect the controller.The switch is also with indicator light inside

Speed control dial has 3 scales to control variable speed: Low, Medium or High speed.Simple use the dial to increase or decrease fan motor speed

One controller has 3 settings: Variable, Off, and Full(On).Safe, practical and easy to use

Make it easy to adjust the speed of your inline fans & duct fans & mini blower

Mazda quality, Factory fitment, OEM

Fits: Mazda MPV 2002-2006

Mazda 6 2003-2008 (3.0L Only)

✔️This electronic stepless speed controller with heat sink is a upgraded fan heater controller,which will provide s a better heat dissipation.Widely used for 12-24V DC electric appliances to adjust the speed of car truck fan heaters, defrosters, fans, etc

✔️Red wire connected to the positive pole of power supply and motor, blue wire connected to the negative pole of motor, black wire connected to the negative pole of power supply

✔️Exquisite workmanship and strict factory inspection ensure the accuracy of the product. We will perform three manual inspections for you during manufacturing, warehousing and transportation

➤Easy to install，It Has Multiple Protection Functions Such as Lithium Battery Low Voltage Protection, Battery Automatic Detection of The Number of Cells, High Temperature Protection, and Throttle Signal Loss Protection.

Compatibility:Compatible With Traxxas TRX4 TRX6 D90 HSP Tamiya Redcat Axial SCX10 HPI 4WD Truck 1/10 RC Car(TAMIYA Plug).

Using High-Quality Aluminum Alloy Heat Dissipation with Cooling Fan, good heat dissipation efficiency, can quickly reduce the motor temperature.

Package dimensions: 17.018 cms L x 8.636 cms W x 8.382 cms H

Package quantity: 1

Product Type: Electric Fan

PRODUCT PARAMETER -- ❶Material: Plastic ❷Output voltage: 120 (V) ❸Speed range: stepless speed regulation (rpm) ❹Rated power: 1.8 (KW).

PREMIUM QUALITY -- Made of high quality material, it is durable and has long service life. Compact size and light weight, easy to carry and operate,high durability and practicality.

EASY TO OPERATE -- Direct plug-in design (US 3 Hole Plug) does not require wiring operation. At the same time, the aluminum plate on the back has a hanging buckle, which is convenient to carry. The knob indicates stepless speed change, which is simple and clear.

This variable speed motor controller is perfect for bench testing, experimentation, industrial applications, and DIY projects, offering precise control over fan speed and voltage regulation.

The maximum power of this voltage regulator is 4000W,with AC 120-220V input and adjustable voltage output (0-220V), Rated current is 9A, can withstand a maximum current of 18A.

This motor speed controller is equipped with a new bi-directional high power SCR inside.You can easily control the speed of your motor to your desired level using the rheostat.