Best Tekton Hammers in 2026

Proudly made in the USA

Soft, brass head is non-sparking and designed to prevent damage to the work surface

Ideal for near-combustible materials, or driving bushings and gears

FOR GUNSMITHS: Make precise, repeatable taps with the ergonomic, weight balanced hammer set. This hammer tool set is a must have for any armorers tool kit for firearm disassembly, gun repair and for custom builds.

INCLUDES: Premium hammer, four interchangeable hammer head tips, steel hammer tip, rubber, nylon, brass gunsmithing hammer tip, pin alignment tool and molded carry case.

GUNSMITH HAMMER: Adjusts easily with the 4 interchangeable driving head faces. Whatever the job is the 4 in 1 design allows you to have a metal hammer, brass hammer, nylon hammer and soft hammer all in one.

VERSATILE AND EFFICIENT- SE 5-IN-1 Dual Interchangeable Hammer is designed to meet the needs of everyone. With 5 interchangeable faces, you can accomplish a wide range of tasks with just one hammer, making it a practical and cost-effective solution.

EASY TO USE- Threaded faces of the hammer are easy to change and remain secure on the aluminium head, providing consistent performance for any job. This hammer can quickly get the job done if you're embossing metal, stamping blocks, or shaping metal.

NON-MARRING AND LESS RECOIL- The hammer's rubber, nylon, and ABS plastic composition provide varying degrees of hardness to minimize the risk of marring and reduce recoil, allowing you to work more comfortably and efficiently.

GENERAL USAGE: The Brass 1 pound metal stamping hammer was designed for metal stamping. It has a smaller and scaled down grip designed for easy handling and precision striking. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time. This hammer is great for the beginner and intermediate stamper. Also works great for flattening wire for jewelry making

QUALITY: The brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job. Sturdy and grooved grip allows for maximum and precise strikes. The head is firmly attached to the handle. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow.

PRECISION: Because of it’s scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings. Helps to prevent double impressions and protects the longevity of your stamps. Brass is much better than steel for metal stamping because it disperses the energy of the hit into the stamping blank.

OWDEN New design 3 in 1 metal stamping hammer, There are 3 material heads design for different craft working. The hammer is wrapped in ABS plastic, And the handle is wrapped in soft plastic to reduce the shock force when struck.

The steel head: The steel head part is fixed on the hammer,Chrome plated, And the hardness about HRC48-52. It can meet the use of the family.

The brass head: The brass head is screwed on the hammer body by the thread structure. And designed to prevent the unscrew after every hit. the brass head is softer than steel stamps, the brass head will dent when stamping. This is the correct result. In order to prevent the stamp from jumping during use,ghosting of the letters.

【EASY TO USE】Nylon face of the brass hammer is non-marring and great for alignment

【HIGH-QUALITY MATERIALS】This rubber mallet has 4 replaceable hammerheads, namely rubber, nylon, brass, and aluminum, which can be provided with a different hardness to avoid injury and reduce recoil

【FUNCTION AND COMPATIBILITY】Gunsmith hammer, which is professional for repair and maintenance, Brass face can be used for driving pins and punches

INCLUDES: 12-oz. brass hammer, 16-oz. ball-peen hammer, and 24-oz. dead blow hammer

BRASS PLATTED CAP HAMMER: Used for non-sparking applications

STEEL FACE AND PEEN HAMMER: Allows for conventional use in striking punches and chisels as well as shaping and straightening unhardened metals

Material: Our Two-sided Metal Texturing hammer head is made of high-quality steel and the handle is made of polished wood. This texturing hammer is durable enough to withstand many uses and ensures a quality finished product.

Design: This Texturing Hammer comes with 9 Interchangeable heads in different patterns and a polished wooden handle. Each hammer face is securely attached with a threaded collar and it is easy to change heads.

Features: The weighted head of the hammer reduces the amount of striking power needed. The ergonomic wooden handle enables a comfortable grip and sufficiently absorbs hammering vibrations to improve striking accuracy. You may use the small designs to pinpoint texture in a particular area and the large designs to cover a bigger area or use multiple tips to layer textures on one another.

✔️ Exceeds Expectations - Get excellent value for your money with this gunsmith tool kit. The all-in-one set includes a dead blow hammer, a 9-piece roll pin punch kit, and a portable storage bag.

✔️ Gets the Job Done - Each punch in this handy armorers tool kit is made of drop-forged, heat-treated, hardened and knurled steel. Expect superior durability and performance when using these gunsmithing tools.

✔️ Optimized for Precision Work - Our 9-piece gunsmithing punch set is equipped with reverse taper tips - ideal for precision work and avoiding slips, scratches, and damage to your machinery.

✨Material: Metal, brass. They are grouped together is a mini hammer, easy to use on the desktop, security, save energy, feel good.

✨Compact sizes and Portable: Compact way to keep tools handy in-home or glovebox, a good little gift for anyone who enjoys small size tools.

✨Package included: Multi-function copper hammer. One Dual-purpose copper hammer, and 4 Screwdrivers inside the handle which with 1 piece small Phillips screwdriver, 3 pieces Slotted screwdriver.

Great for use on metal, leather, woodwork, jewelry, cars, machinery and more

Non-Sparking Head - no danger of sparking which can cause accidents

Machined Solid Brass Head - will not mar harder metals or mark softer materials

PROTECT YOUR TOOLS: Brass head mallets feature a heavy head that maximizes the efficiency of each blow and reduces bounce-back. This prevents arm fatigue and strain on your hand. Striking with a brass hammer prevents your metal from being thinned or marked by the face of the hammer and the soft brass head won't damage steel tools.

GREAT FOR ALL SKILL LEVELS: This striking hammer is great for students learning metal working techniques and well as those who do frequent metalsmithing. The 10-inch handle is made to provide a firm, comfortable grip as you work. The 2lb head means less striking force is needed and the large, 38mm hammer face means you’re more likely to hit your target and not your hand!

METALSMITHING TOOL: A brass hammer, also known as a dead-blow mallet, is the perfect choice for dapping, chasing, hitting punches for creating discs, riveting, and light stamping. When used with stamping tools, the brass mallet prevents unwanted movement because it has less reverberation than steel hammers.

This is a new 4 ounce brass ball pein hammer

Great for metal working

Has a face that measures approximately 5/8" (15 mm) in diameter

Brass faced shot-loaded head produces non-sparking, controlled and effective blows without rebound

Features comfortable rubber grip

Model No-BFH12

【CHARACTERISTIC】: Brass Ball Peen Hammer is Due to the good thermal conductivity of brass, the heat generated in a short time is absorbed and transmitted during the friction and collision between tools and objects, and the copper itself is relatively soft. It has good concession during friction and collision and is not easy to produce sparks,and is very safe.

【USES】: Brass Ball Pein Hammers adopt Precision casting process, with high density and strong hardness; Mainly used for fitter, cold work, assembly, maintenance and other work; Handing hole design; The plastic covered handle contains compressive glass fiber, and the outside is made of PP and TPR materials. It is firm and durable. It can be used in various weather environments and is resistant to grease.

【APPLICATION】: Brass Ball Peen Hammer is Widely used in oil refining, petrochemical, coal and other industries Mining, oil field, chemical fiber industry, paint industry, chemical fertilizer industry,various pharmaceutical industries and other places.

Hammer Screwdriver Set: Multi-tool kit including hammer and screwdriver: slotted/flat head screwdriver x 2, Phillips screwdriver x 2, mini gold hammer x 1, brass hammer consists of mini hammer head and handle for easy packing and storage.

Widely used: All-in-one screwdriver hammers are the most common multi-purpose hammers. Meet your various daily needs and work needs: interior decoration, handcrafting, repairing Gadget objects, mobile phones, laptops, watches, glasses, cameras, tablets, game console, computer, and eating walnuts, etc.

Precautions: Before use, check whether the screwdriver tool handle has cracks or whether the installation is firm to prevent the metal hammer head from falling off and causing accidents. If the handle is broken or damaged, it should be replaced with a new one immediately, no further use is allowed.

Brass on one end, hammer on other end

Minimizes rebound

Won't spark

STUBBY BRASS HAMMER SHORT ERGONOMIC HANDLE BALL PEEN HEAD 1 POUND

Made with non sparking brass hardware with a non marring surface protective vinyl tip

Needs non marring and soft application for use in non sparking environment

Replaces tips made from soft lead, wood and rubber

【CHARACTERISTIC】:The HRC of the Scaling Hammer made of brass is not applicable to strike hard objects, due to the HRC of brass is not very high, it is only applicable to overhaul fine objects, and can protect the objects when hammering. Please choose the materials of hammer according to the work piece. If you want to strike hard objects like rock or metal, please choose iron hammers or stainless hammers in our shop.

【USES】: Precision casting process is adopted, with high density and strong hardness; It is used to remove rust and welding slag in ship and electric welding processing; Handing hole design; The plastic covered handle contains compressive glass fiber, and the outside is made of PP and TPR materials. It is firm and durable. It can be used in various weather environments and is resistant to grease.

【APPLICATION】: Widely used in oil refining, petrochemical, coal and other industries Mining, oil field, chemical fiber industry, paint industry, chemical fertilizer industry,various pharmaceutical industries and other places.

Good for using with disc cutters, dapping sets, center punches, and other large striking tools.

Brass head ensures a strong dead-weight strike that will not bounce or slide.

Brass also ensures that your striking tools will not get malformed.

Precision hammer for gunsmiths and machinists.

Made in USA

CNC machined steel, powder coated for corrosion resistance

This is a new plastic&brass hammer

Great for jewelers to use for metal working

Has a face that measures approximately 1/2" (12 mm) in diameter

Made from solid brass

Includes 5 interchangeable faces for customization

Easy-to-change faces

Tether-Ready 3.8 Lb. Brass Hammer

Tether-Ready 3.8 Lb. Brass Hammer

Tether-Ready 3.8 Lb. Brass Hammer

100% USA Made

Non-sparking

Most durable hammer

BEECH HANDLE---The handle has many diamond surfaces, comfortable to hold. The wood is dense, strong and not easy to wear.

DAMPING HAMMER CORE---Retains the damping effect, protect brass hammer core for extended service life.

PREVENT FALLING OFF---Leather non stripping rope to prevent hammer from flying out accidentally when using.

2lb Brass Non-Sparking Hammer

Comfortable, textured handles for easy grip and handling

Double-faced