Best Laserpecker Hand Tools in 2026

EXTRA LONG: Super long 13.8" handle with comfortable grip feeling. A lot of leverage to remove those pedals which stuck in the crank arm. Please view our VIDEO in the listing to make sure that the turning directions are correct. The left and right pedal's axle threads are different.

HEAT TREATED: Heat treated high quality steel constructed for long time using. Professional Bicycle 15mm wrench for installation and removal of pedal without scratching the crank arms.

PRECISELY MACHINED: The slots are precisely machined extra heavy duty steel to match the pedal spindles perfectly. There are 2 slots on each side, so that is very helpful to get the bike pedals in the optimal working position.

QUALITY: This Bikehand YC-307BB is a triple-ended bottom bracket wrench. 30cm whole length to provide great leverage and is made of high-quality heat treated steel for improved functionality and longer life.

COMPATIBILITY I: Shimano 16-Notch X 44mm: Fits 16-notch, 44mm diameter external bearing bottom bracket cups includes Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, FSA,GXP, Truvativ, and Phil Wood outboard bearing. NOTE: Will fit Shimano TL-FC24 and TL-FC25 adapters.

COMPATIBILITY II : Bottom Bracket Wrench, Shimano 16-Notch X 41mm: New for 2015. Fits Shimano BBR60 (Ultegra 11-speed 6800 Series) and BB-MT800 (DEORE XT M8000 Series ) bottom brackets.

PLEASE CHECK THE COMPATIBILITY OF THIS TOOL BEFORE PURCHASE. DO NOT PURCHASE IF YOUR BOTTOM BRACKET ISN’T A 16-NOTCH TYPE OR ISN’T IN 44MM OR 39MM DIAMETER.

THIS TOOL DOES NOT FIT Shimano Ultegra BBR60 6800 series and XT BB-MT800 DEORE XT M8000 series.

COMPATIBILITY I: Shimano Hollowtech II. BB type: 16-notch, 44mm diameter external bearing bottom bracket cups. Compatible with some of the FSA, SRAM, and Truvativ bottom brackets too if the specs are the same. Also fits disc brake rotor lockrings with 16 external notches. NOTE: It will fit Shimano TL-FC24 and TL-FC25 adapters.

EXTENSIVE COMPATIBILITY: Compatible with chains from one-speed up to 12 speed, both Shimano and Campagnolo, and half link chains. No need to look any further chain removing tool with this one on hand.

EASY TO USE: The adjustable end ring helps fit against the side plate evenly and securely, precisely accommodating the chains in different widths. Having this solid setting, the ergonomics grips make the removing even easier, reducing the potential damage to the chain.

INTERCHANGEABLE PIN DESIGN: A dedicated driving pin for Campagnolo chains is equipped on standby. And a courtesy Shimano pin is provided to double the service life of this essential tool. Its unique hanging hole works as a socket wrench to remove or tighten the pins effortlessly.

PERFECT SETTING: The star nut need to be tapped into the fork steerer at the right position. Too low, the headset bolt cannot reach. Too high, the star nut cannot bite the steerer wall tightly.

COMPATIBILITY: The Threadless Nut Setter is used to install the star-fangled nut found on 1-1/8” threadless headset systems.

EASY TO USE: Install the star nut onto the tool and tap it into the fork steerer using a hammer.

MULTI-FUNCTION: This tool features a 15mm pedal wrench and 14mm&15mm sockets, which are made for mounting and disassembling pedals from cranks without scratching the crank arms, as well as turning a nut or bolt without repositioning the tool on the fastener to improve work efficiency.

PREMIUM QUALITY: This tool is made of durable heat-treated steel that will prevent it from bending and wearing off through years of use. The dual-density moulded extra-long handle provides better leverage and reliable grip during operation.

SPECS: Length is 23cm/9.05inches.

SIZE: 15mm Wrench to install and remove pedals without scratching the crank arms. 16mm and 17mm for the Cone Spanner. Length: 278 mm. Weight: 305g /10.8 oz.

HEAT TREATED: Heat treated high quality steel constructed for long time using. Professional Bicycle 15mm wrench for installation and removal of pedal without scratching the crank arms.

PRECISELY MACHINED: The slots are precisely machined extra heavy duty steel to match the pedal spindles or bolts perfectly.

HANDY TOOL: BikeHand Tools Master Link Pliers are designed to help remove and replace master links in modern chain systems, although not needed when new. Over time, with dirt and corrosion, it is impossible to separate the joining link by hand.

OPEN & CLOSE 2 IN 1 TOOL: Extremely easy to pull the link into its closed position. The pliers are also designed to open the master link which requires significant force for removal. Compatible with 5-12 Speed.

NON SLIP: Rubber-coated handles ensure a soft non-slip grip. Quality spring would not fail even after years.

SMART DESIGN: This tool is specially designed for removing the crank arm off the BB without taking off the pedals. Please watch the video in the listings for more details.

FIT SQUARE TAPER BB ONLY: Special design for threads and square tapered crank arm. Does NOT fit ISIS or Octalink crankset.

HEAT TREATED: Heat-treated high-quality steel constructed for long-time use.

Vinyl coated handles are colour coded to make for quick size recognition

A classic spoke wrench, shaped for comfort and convenience

Black is for 80 gauge/0.127 inches/3.23mm, Green is for 80 gauge/0.130 inches/3.30mm, Red is for 80 gauge/0.136 inches/3.45mm

COMPATIBILITY: Tool to remove the crank arms off the bottom bracket. Removable head allows fitting all ISIS and tapered type. (Adatper removed for tapered, adapter for ISIS BB)

STRONG THREAD: High quality (Workshop quality). The precise thread of this tool is very strong, so it will NOT damage the thread of cranks.

HEAT TREATED: The tool is made of heat treated hardened quality steel. It is long lasting little but powerful too.

COMPATIBILITY: Tools to install and remove Shimano and Sram Cassette off the hub body. Compatible with 7-12 speeds chain. Fits all Shimano cassettes, including road bikes and mountain bikes.

LONG & HEAT TREATED: Long handle for easily removing the rusted cassette from the wheel hub body. Heat-treated high-quality steel constructed for long-time use. Please watch the video in the listing for details.

RUBBER COATED: Better grip with a rubber-coated handle which is long enough for more leverage.

WHAT'S INCLUDED: This 6 pieces precision bike cleaning brush set includes 1x cleaning brush with the water hose connector, 1x bristle soaping brush, 1x tapered brush, 1x sponge and bristle brush, 1x C-shaped brush and 1x gear clean brush.

EASY TO USE: Durable and lightweight, this set of cleaning brushes is very easy to carry and use. The bristle soaping brush has a wide head for general cleaning on surfaces and frames. The tapered brush is perfect for getting into the hard-to-reach areas.

PRECISION CLEANING: The sponge and bristle brush is made of dual-material material and is great for heavy-duty scrubbing. The C-shaped brush is made for cleaning the bike frame tubes and tires, while the gear clean brush comes with 3 different heads for removing grease and mud on the crank and corners.

INTENDED USE: The Spoke Holder has 6 slots that are compatible with bladed spokes of size 0.8mm to 2.4mm. It eliminates the spokes effectively when truing, repairing or building wheels. Commonly used on mountain & road bikes. NOT COMPATIBLE WITH ROUND SPOKES

EASY OPERATION: Specially designed and precisely manufactured spoke can securely hold spokes to prevent twisting, provide a better grip, as well as allow multiple positions for optimal leverage and hand positioning during the spoke tension adjustment.

HANDS-FRIENDLY: ABS plastic non-slip handle that is comfortable to hold and its surfaces provide a secure grip when in use.

APPLICATION: Designed for the bench vises to hold hub axle and pedal spindles. Secure your parts in the proper position.

COMPATIBILITY: Work with axle sizes 5mm, 9mm, 10mm, 12mm, 14mm, 20mm, 25mm, 30mm and 36mm.

EAST TO USE: Just insert the axle into the opening and tighten in a bench vise. An essential tool for all mechanical apparatus to secure an object.