Best Metric Hardware Nuts in 2026

【High Quality Stainless】These Nuts are 100% 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other Nuts on the market today.

【Nuts That You Can Depend On】Our hex nuts are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance.

【Great To Keep Around】Bolt Dropper hex nuts are great to have around for use in wood and wet environments. Bolt Dropper Hex Nuts are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects.

Includes: 10 Hex Cap Nuts; 10 Hex Cap Nut Plugs

Decorative hardware conceals lag screws

OWT hardware is commonly used to construct pergolas, arbors, pavilions or decks

Seat Style Cone Seat Nut; Thread Size M14 x 1.5; Overall Length 1.965; Hex Size 21mm & 22mm Dual Hex; Includes 4 Locks & 1 Key.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.

For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card

McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.

Non-marring deep 19mm lug nut socket

Non-marring core and sleeve protects custom wheels and lug nuts from scratches and abrasion

Attractive Gold finish for easy identification

1/2" Thread size

13/16" Hex size

1.40" Overall length

FITS: Aftermarket wheels requiring a lug nut with a conical 60 degree seat and small diameter like spline drive or tuner style nuts.

WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer.

SPECS: 9/16-18 thread - Closed End Duplex XL Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 2.02 in. long - 0.91 in. wide

1pc 6 Spline Lug Nut Socket Key Replacement. ONLY compatible with 6-point Spline Type Tuner Locking Lug Nuts with smaller diameter (M12, M12x1.5, 12x1.25, 1/2", 1/2"x20 Thread Pitch). NOT compatible with larger spline lug nuts such as ones for Truck/SUV. Also NOT compatible with spike lugnuts.

Inner Diameter: 17.6mm (0.69"). Outer Diameter: 20.5mm (0.81"). Total Length: 90mm (3.5"). Depth: 62mm (2.4"). This key works with the following socket sizes: 19mm, 3/4", 21mm, 13/16".

[Quality] Special coating provides exceptional appearance and corrosion resistance. Manufactured from cold forged steel that can withstand much more force than the torque needed to secure the nuts on your vehicle.

This t-nut is made out of 1010 steel with a black zinc finish and is compatible with our 10 Series extruded aluminum profiles or 1.0" based t slot aluminum extrusion.

Used with a 1/4-20 bolt to mount joining plates, brackets, or other t-track accessories. Works great for our 1010, 1020, 1050, 2020, and many 1.0" based extrusions.

This t-nut measures .443 x .124 x 1 inch long and works great as mainstay piece of your home improvement arsenal. Works with many other competitor's extruded profiles.

Genuine UNISTRUT Brand

1-5/8" Square White Plastic Strut Channel End Cap

For use with: P1000, P1100 & P2000 and All 1-5/8” Tall Strut Channels

- Material: Carbon Steel ; - Weight: 30g;

- Hole diameter: 2mm/ 0.08"; - Pitch: 0.4mm;

- Package: 100 x M2 Nylon nuts; - Color: Black;

Fitment: Vehicles with wheel lug nuts requiring a 1/2-20 thread(5 lugs) and take a conical 60 degree seat, compatiable with Ford Ranger, Explorer, Edge, Jeep Commander Grand Cherokee, Liberty, Wrangler Dodge Dakota Durango Golf Cart Ezgo Club Car and more, please check the seat type of your original lug nuts firstly before placing your Order, if you need 4pcs set, you can refer B0BYJDCX83.

Specification: 1/2-20 thread pitch, 1.4in tall, 0.78"OD, 3/4'' (19mm) and 13/16''(21mm) Hex socket, set of 20 wheel nuts+1socket key tool, separated and protected in padding box ((handwrench recommended, don't use the impact tool)

Performance: One-piece structure design, which is more safer while you are installing the lug nuts and 6 spline locking safety structure, can not torque down if no professional tool which is not easily stolen. all of our products past 72 hours salt spray tested which can promise a longer service life compared to 48 hours for others.

☆PERFECT REPLACEMENT - Replacement for 1995-2019 Silverado 1500, 2500, 3500 /1995-2019 Chevy Suburban 1500 Tahoe / 2015-2017 Ford Expedition, F-150 / 2003-2016 F-250, F-350 8 lugs. It also works for 5 lugs and 6 lugs, a few more as a spare is also a good choice.

☆SPECIFICATION - M14 x 1.5 Thread pitch, Overall tall 4.4", Diameter 0.9", extended, Spiked, Bulge Acorn, Closed End, 60 Degree cone/conical seat, 1 Socket key for installation 3/4".

☆ON-VEHICLE TESTING - One-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. Our products have undergone extensive on-vehicle testing to ensure proper fit and long-lasting performance before selling them.

【Quality and Safety Assurance】The KSP 6x139.7 wheel spacers are REAL FORGED from Lightweight Anodized Black 6061-T6 Aluminum, is more heavy duty, durable and corrosion resistance. And they are specifically designed by in-house engineers and CNC machined to exact standards,ensuring the best fitment possible. Heat treated and hardened 10.9 grade geomet bolts, not easy to break off and strip. Be carefully measuring the OEM wheel hubs and bore dimensions, these 106mm hubcentirc spacers mount with minimal clearance to prevent any vibration, retaining the stock driving.

【Improve】There may be not enough threads for the lug nuts to fit wheel spacers, especially for Tacoma and FJ. If he open lug nuts that came with the package can not engaged enough thread, please choose the ET lug nuts (B07DLX519N).

【Specs】4PCS 1.25" (32mm) Thickness | 6x5.5” Vehicle Bolt Pattern | 6x5.5” Wheel bolt pattern | 106mm Center Bore with lip | 12-1.5mm Threaded Studs/Nuts. Recommended torque: 72-80 FT/LBS. We laser engrave the sizing and part number info for an easy identification and individuation. NOTE: The spacer will not fit the front wheels with locking hub, such as some years Land Cruiser, Pickup etc.

Solid One-Piece Design, Acorn Bulge Style - 1/2-20 thread - Conical 60 Degree Seat - 3/4 (19mm) Hex - 1.4" (35.5mm) Height - 1.18" (30mm) Inner Height - 0.9"(23mm) wide.

Premium triple-nickel chrome plating (not steel capped) to provide exceptional beauty and corrosion resistance.

Manufactured with cold forged and heat treated steel for dependable strength and durability.

Nuts Thread Pitch:12mmx1.5

1.46’’(37mm) overall length ,1.1”(28mm) overall width, 13/16’’(21mm) Hex

Manufactured with Cold forged steel and heat treated for stronger and more durable to meet or exceed OEM Standards

【SPECS】: Closed End Bulge Acorn Spline Lug Nuts Black 20PCS with 1 Lug Nut Key - 1/2"-20, 1/2x20,1 2-20 Thread Size - Conical 60 Degree Seat - 19mm Hex (3/4" Hex) - 1.38" (35mm) Overall - 8 Grade. （NOTE: Please tighten the lug nuts manually, DO NOT use electrical tools. ）

【FITMENT】 : By matching this lug's specs (thread seating style hex etc.) to match both your vehicle and wheel requirements (Car Reference). Or contact our Customer Service Team to verify a safe and proper fitment.

【HIGH QUALITY】: A proprietary cathodic black coating that gives the durability of high quality chrome and the sharp look of satin black paint. Manufactured with cold forged and heat treated steel for dependable strength and durability, paint will not fall off easily.

16-PIECE SET - double hex-headed hex and tuner style keys to fit a variety of aftermarket lug nuts

BUILT TO LAST - Heat-treated chrome vanadium steel finished with corrosion-resistant black oxide

SPLINE, HEX, AND STAR KEYS - Set includes a wide variety of sizes and key styles

[SIZE] - M3 x 0.5mm.

[MATERIAL] - Made of carbon steel, surface is zinc-plated for good rust resistance..

[ADVANTAGE] - It is used in places where frequent adjustment or disassembly of fastener connections is required. No tools are required to install the product, just turn your hand to complete.

Compatible with Ford 92-11 Crown Victoria, 77-79 Thunderbird, 64-14 Mustang, 86-97 Aerostar. Compatible with Ford 66-96 Bronco, 84-90 Bronco II. Compatible with Ford 92-06 E-150 Econoline, 91-19 Explorer, 01-10 Explorer Sport Trac. Compatible with Ford 80-96 F150, 83-12 Ranger. Compatible with Dodge 65-77 Monaco, 87-90 Dakota, 07-12 Nitro, 94-01 Ram 1500. NOTE: Vehicle Must Have 1/2"-20 1/2x20 1/2"x20 Studs.

Total Length: 1.75 inches | Thread Size & Pitch: 1/2-20 | Seat Type: Conical ET Style | Color: Silver / Chrome | HEX SIZE: 19mm (3/4") | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements.

SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper thread size and length/width before installing. Additionally, ensure your wheels' lug seat matches these lug nuts. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.

Improved design - direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut

Corrosion resistant - by removing the veneer of the OEM lug nut design there's no chance of moisture and rust causing it to bulge and deform

Thoroughly tested - part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards

🚗 FITMENT - Replacement for 2011-2020 Dodge Durango, 2011-2022 Jeep Grand Cherokee, 2012-2022 Ram 1500 2500, 2005-2019 Chrysler 300, Chevy Silverado 1500 1999-2017, 2010-2017 Chevy Camaro and fit all m14x1.5 7/8" hex conical seat wheel nuts.

🚗 SPECIFICATION - M14x1.5 Thread - closed end bulge style lug nuts - conical 60 degree seat - 7/8" (22mm)hex - 1.46" Hight - color: silver / chrome.

🚗 ANTI-OXIDATION - Triple chrome, cold forged and heat treated steel(anti-rusting and anti-stripped, high strength and durability).

Finish: Black

Works with Gorilla 1921SD-KEY lug nuts

Works with most small diameter 6 spline lug nuts

✅Features -- Butterfly wing nuts is made of high quality stainless steel, corrosion resistant, strong and durable. Thread is better for brittle material, ensure a long lasting hold.

✅Dimension -- Square wing nut inner diameter: M12:12mm/0.47", M10:10mm/0.39", M8:8mm/0.31", M6:6mm/0.23", M5:5mm/0.19", M4:4mm/0.15", M3:3mm/0.11". Metric Measurement!

✅Easy to Use -- Features two stainless steel butterfly shape wings, one on each side , easy twist the nut by hand without any other tools.

★ 【Material】: These Wing Nuts were made by high quality 304 stainless steel,it has high hardness,corrosion resistance,oxidation resistance,low temperature resistance and etc.,can be used in humid environments, and do not worry about rust.

★ 【Introduction】: This nut has a wing on each side that helps you to tighten the nut without tools,this item Packed in a plastic box, 100% new, never used.We have distinguished nuts of different specifications with small grids for your convenience.

★ 【Applications】: For machinery and equipment, electronic equipment, communications equipment, hardware lighting, building bridges, furniture decoration, etc.

Practical: Use the ABN 1/2” Inch Impact Drive 19mm Lug Nut Socket – Non-Marring, Color-Coded, Laser-Etched, Thin-Walled Wheel Rim Protector to remove bolts on a vehicle’s wheels as the protective sleeve prevents damage on custom rims and lug nuts

Safe: 360° non-scratch sleeve and insert protect bolt tops, wheel rims, and lug nuts from scratches during use

Versatile: Perfect for both factory and aftermarket painted, clear coated, chrome, and other wheels/bolts; Fits all 1/2-inch drive socket hand wrenches, electric, or air tools; Fits most vehicles with 19mm wheel bolts; Hollow design allows room for removing longer bolts

Compatible with Jeep 18-20 Wrangler JL, 19-20 Gladiator JT. Compatible with Chevrolet 07-13 Avalanche, 88-00 C2500 6-Lug, 94-00 K2500 6-Lug, 99-20 Silverado 1500, 00-14 Suburban 1500, 95-20 Tahoe. Compatible with GMC 07-20 Sierra 1500, 00-20 Yukon. Compatible with Ford 15-20 F-150, 15-20 Expedition. Vehicle Must Have M14x1.5 14x1.5mm Studs. IMPORTANT: Check existing wheel lug hole before purchasing.

Total Length: 1.80 inches | Thread Size & Pitch: 14x1.5 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: 19mm (3/4") | STYLE: Long, Bulge Closed Lug Nuts. IMPORTANT: Ensure these lug nuts are the size (length/width/seat) that you need, see Diagram for Measurements.

IMPORTANT! CHECK BEFORE PURCHASE! Check your current nut size (length/width/seat). NOT compatible with ALL OEM WHEELS. Does NOT fit wheels with larger lug seats. May not fit OE wheels or wheels made by the manufacturer with wider lug seat, please verify measurements. SAFETY ADVISORY: Lug Nuts are an important safety component. Ensure they are the proper size. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.

20-piece package of Short Open End aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 7/16"x20 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.

Compatible with Buick Century Apollo, Century, GS, GS 350, GS 400, GS 455, LeSabre, Regal, Skyhawk, Skylark. Compatible with Chevrolet Bel Air, Biscayne, Camaro, Caprice, Caprice, Chevelle, Corvette, El Camino, Impala, Malibu, Monte Carlo, Nova. Compatible with Pontiac Bonneville, Catalina, Firebird, Grand Am, Grand Prix, GTO, LeMans, Sunbird, Ventura. Vehicle Must Have 7/16"-20 7/16x20 7/16"x20 Studs. Verify Year/Make/Model in Description.

Total Length: 0.81 inches | Thread Size & Pitch: 7/16-20 | Seat Type: Cone Seat | Color: Black | HEX SIZE: 19mm (3/4") | STYLE: Short, Open End Lug Nuts. See Diagram for Measurements.

20-piece package of Closed Bulge aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 12x1.5 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.

Compatible with Cadillac Eldorado XLR. Compatible with Chevrolet Camaro Cavalier Cobalt SS Corvette Equinox HHR Impala Malibu Monte Carlo S10 S10 Blazer SSR Venture. Compatible with Chrysler PT Cruiser Sebring. Compatible with Dodge Daytona Neon Stratus. Compatible with GMC Jimmy S15 Sonoma. Compatible with Jaguar S-Type X-Type. Compatible with Jeep Compass Patriot. Also compatible with Pontiac Firebird Grand Am GTO Phoenix Trans Am. Vehicle Must Have M12x1.5 12x1.5mm Studs.

Total Length: 1.40 inches | Thread Size & Pitch: 12x1.5 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: 19mm (3/4") | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements.

2pc 7 Spline Lug Nut Socket Key Replacement. Compatible with 7-sided Spline Type Tuner Locking Lug Nuts. Typically 14x1.5, 14x2, 9/16x18, 1/2"x20 Threads. Works with Multiple Hex Socket Sizes: 19mm, 3/4", 21mm, 13/16".

[Quality] Special coating provides exceptional appearance and corrosion resistance. Manufactured from cold forged steel that can withstand much more force than the torque needed to secure the nuts on your vehicle.

[Verify Nut Diameter] There are different diameter spline lug nuts on the market. Ensure that the diameter of your 7-Spline lug nut is smaller than 20mm.

20-piece package of Closed 6-Spline aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 1/2"x20 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.

Compatible with Ford 1992-2011 Crown Victoria, 1977-1988 Thunderbird, 1964-2014 Mustang. Compatible with Ford 1992-1996 Bronco, 1984-1990 Bronco II. Compatible with Ford 1992-2006 E-150 Econoline, 1991-2019 Explorer, 2001-2010 Explorer Sport Trac. Compatible with Ford F-150 (1992-1996), 1960-1979 Ranchero, 1983-2012 Ranger. Compatible with Dodge 1965-1977 Monaco, 1987-1990 Dakota, 2007-2012 Nitro, 1994-2001 Ram 1500. NOTE: Vehicle Must Have 1/2"-20 1/2x20 1/2"x20 Studs.

Total Length: 1.40 inches | Thread Size & Pitch: 1/2-20 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: Spline | STYLE: Long Spline, Closed End Lug Nuts. See Diagram for Measurements.