Best Adapter Hydraulic Fittings in 2026

SUPERIOR PERFORMANCE: AquaAulos hydraulic fittings are made to the highest standards, with our JIC cap and plug kit meeting or exceeding SAE J514 conventions. These industrial heavy-duty JIC fittings are made from premium carbon steel galvanized with robust and long-lasting zinc, which prevents rust, corrosion, and degradation, even with extended use. Over time these fittings are exposed to hose fluid, so this durability is essential. You can trust our products like any leading brands, such as Parker, Eaton Aeroquip, or Gates, as they have been rigorously tested and meet the industry standards for pressure, temperature, and material strength!

PRECISION-ENGINEERED: We understand the importance of heavy-duty craftsmanship, which is exactly what we strive for in every piece in this kit. Our state-of-the-art CNC machine provides ultra-precise production, ensuring that the caps and plugs are made with fine-tolerance thread with good sealing for easy, repeated installation and removal. This extra attention to the manufacturing process enhances the adapter's performance. It provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs.

AVOID COSTLY DOWNTIME: The perfect caps and plugs kit for the mechanic in you. These JIC kits seal and protect the ends of hydraulic hose and tube fittings to prevent hydraulic liquids from leaking onto the ground or into your or your client's machine. While you perform preventive maintenance, it also stops contaminants such as dirt, dust, moisture, and sand from entering and damaging your machine's sensitive and expensive parts, such as Pumps Motors, Valves, and Cylinders.

64 FITTINGS---This 64-piece ORFS hydraulic cap and plug kit by Zelcan gives you plenty of fittings in the 6 most commonly needed sizes: ORFS 4, 6, 8, 10, 12, and 16.

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.

EASY TO USE---These ORFS caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly.

64 FITTINGS---This 64-pc. JIC hydraulic cap and plug kit gives you plenty of fittings in the 6 most commonly needed dash sizes: -04, -06, -08, -10, -12, and -16

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments

EASY TO USE---These JIC caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly

128 FITTINGS: This 128-piece JIC and ORFS hydraulic cap and plug kit by ZELCAN gives you plenty of fittings in the 6 most commonly needed ORFS and dash sizes: 4, 6, 8, 10, 12, and 16

SUPER BUILD: Our hydraulic fittings are made from 45# structural steel to withstand high heat; they are galvanized to resist corrosion in even the most punishing environments

QUALITY THREADING: These JIC and ORFS caps and plugs have precision-engineered standard threading that allows for smooth installation to hermetically seal your hoses, tubes, and pipes

Most Commonly Ssed Size:4, 6, 8, 10, 12, and 16.It can meet most of your needs.

Application：Our AKM hydraulic jic plug and cap kit are made from 45# structural steel widely used in agriculture, contruction,mining and fuel industries for high pressure fuel delivery and fluid power applications,seal hoses, tubes, and pipes.

Equipped with high-quality plastic outer box, with accessories parameter table.

64 PCS hydraulic JIC cap & plug fittings kit,AN assortment hydraulic fitting set,also known as "AN" 37 degree flare JIC caps and plugs. The JIC 37° flare thread cap & plug can be easily installation to seal hydraulic hoses, tubes, and pipes

A must have for hydraulic lines: hydraulic JIC plug and cap cap kit works great for hydraulic repairs.The JIC cap and plug are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems

The hydraulic adapter fittings set are made by carbon steel to withstand high pressure applications and high heat fuel delivery and fluid power applications. The jic cap and plug kit fittings have precision threading to make sure install smoothly and resist corrosion

Cap for closing the end of a pipe or fitting

Fitting has a JIC flared male connector for connecting to a female JIC pipe

Made of steel for greater rust resistance than iron

[PRODUCT PARAMETER]:3 LOOPS,Heat can be transmitted 30-45 square meters.1" NPT supply and return shut-off ball valves,SUS 304 stainless steel cold forming, corrosion resistance, no rust, better sealing, more precise control, the main tube is not demagnetized as a whole, longer life than demagnetization tubes, and higher hardness.

[VISUAL FLOW METER]:The water inlet branch is equipped with a visual flow meter type shut-off valve, which can accurately adjust the water flow of each channel and prevent the branch from grabbing water. Just open the red cap and turn the red base to adjust the water volume of each channel to 0-5 liters/min. Effectively ensure the hydraulic balance of each road.

[AUTO EXHAUST VALVE]:Automatic exhaust valve, in a continuous automatic manner, Eliminates the air inside when the system is filled with water and during operation.A hygroscopic vent cap prevents accidental drips.

Cap for terminating male pipe or fitting.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

64 PCS JIC 37° flare thread hydraulic caps and plugs kit,also known as "AN" 37 degree flare JIC caps and plugs.The JIC 37° flare thread cap & plug can be easily installation

The hydraulic jic plug and cap kit widely used in agriculture, contruction,mining and fuel industries for high pressure fuel delivery and fluid power applications,seal hoses, tubes, and pipes

A must have for hydraulic lines: JIC hydraulic cap and plug kit works great for hydraulic repairs.The JIC caps and plugs are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems

【Durable】This fitting has PBT body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life. High pressure resistance, corrosion resistance and a long service life.

【Good Sealing Performance】Stainless steel tube gripping claw makes the grip force stronger, not easy to trip or leak.

【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily.

128 FITTINGS---This 64-pc. JIC & 64-pc. ORFS hydraulic cap and plug kit give you plenty of fittings in the 6 most commonly needed sizes----04, -06, -08, -10, -12, -16 and ORFS 4, 6, 8, 10, 12, 16 .

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.

EASY TO USE---These fittings are used in a test-point and diagnostic setting. They are most commonly used in fluid power and fuel delivery applications, especially those using high pressure

Package Includes: These hydraulic fittings are includes 128pcs JIC and ORFS hydraulic cap and plug, fittings in the 6 most commonly needed dash sizes: 64pcs. JIC kit - #4 (7/16-20), #6 (9/16-18), #8 (3/4-16), #10 (7/8-14), #12 (1 1/16-12), #16 (1 5/16-12) and 64pcs ORFS kit - #4 (9/16-18), #6 (11/16-16), #8 (13/16-16), #10 (1-14), #12 (1 3/16-12), #16 (1 7/16-12).

Precision Engineered Threading: Thanks to our precise CNC machine that can provide the ultimate precision for our JIC and ORFS caps and plugs set, ensuring easy sealing and repeated installation and removal. With high strength galvanized from 45# structural steel material can withstand high-pressure applications and high heat fuel delivery and fluid power applications, providing a longer and more durable lifespan.

Save Time & Energy: Not only these JIC and ORFS caps and plugs set can effectively seal and quickly keep hydraulics lines from fluid leaking when removing fluids from hydraulic application/machinery work/ truck/chemical processing systems, but also used commonly in fluid power and fuel delivery applications. The flat face connection design makes it Reusable and easily maintainable, used to cap lines and hoses when working on hydraulis, to keep dirt out, and to keep fluid from leaking out.

♛【Package Includes】: This kit includes 64pcs JIC hydraulic cap and plug, fittings in the 6 most commonly needed dash sizes: 4, 6, 8, 10, 12, and 16. Which are packed in a transparent plastic box for easy storage and convenient carrying.

♛【High Quality Material】: All the JIC caps & plugs are made from 45# structural steel, has enough strength to withstand the pressure of the pipeline. With zinc plated on the surfece, can prevents corrosion and rust even in humid environment.

♛【Size and Quantity】: There are 12 different size total 64pcs, which are #4 (7/16-20) x 10pcs, #6 (9/16-18) x 8pcs, #8 (3/4-16) x 6pcs, #10 (7/8-14) x 4pcs, #12 (1 1/16-12) x 2pcs, #16 (1 5/16-12) x 2pcs, #4 (7/16-20) x 10pcs, #6 (9/16-18) x 8pcs, #8 (3/4-16) x 6pcs, #10 (7/8-14) x 4pcs, #12 (1 1/16-12) x 2pcs, #16 (1 5/16-12) x 2pcs.