Best Ict Billet Intake Manifolds in 2026

Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Repair Kit Includes: 1 X Sonic Cruze Chevy 1.8L intake Manifold Tuning Valve Runner linkage Arm

This is a new OEM part. We ship worldwide. 2011 2012 2013 2014 2015 2016 2017 2018 Chevy Cruze - Sonic 1.8L engine intake manifold Tuning Valve Runner Actuator linkage , Rod , Arm - attaches to intake manifold AC delco 55570283 - this listing is for the actuator link arm only. This repair is associated with P2076 DTC Code. It is very easy to replace (install), No need to remove the intake Manifold, No tools required.

Fits other vehicles - Engine model #: N18XFH - Chevy - Daewoo - Fiat - Opel corsa astra GM 1.8 Liter I4 Ecotec LUW / LWE Engine

TUNING VALVE RUNNER ARM - TOP quality tuning valve runner arm, Our product is made of reinforced materials and last longer,You can replace old or damaged parts directly.This repair is associated with P2076 DTC Code. It is very easy to replace (install), No need to remove the intake Manifold, No tools required.

COMPATIBLE WITH FOLLOWING VEHICLES - Tuning Valve Runner Arm fit for Chevrolet Cruze - Sonic 1.8L Engine 2011-2018, GM 1.8 Liter I4 Ecotec LUW / LWE Engine, fits other vehicles - Engine model #: N18XFH - Chevy Sonic Cruze 2011-2018 1.8L Engine, please check the fitment in the product description below

REPLACE PART NUMBERS - 55570283 Please check the part numbers whether it suits your vehicle before purchasing.

Compatible with all GM LS series engines

Passenger side port adapter has two 1/8"npt ports, drivers side port adapter has one 1/8"npt port

Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum

re-engineered replacement manifold for gm 3.8l engines

metal-cert sleeved egr port and spacer pipe allows heat dissipation and prevents repeat failures

heat stabilized nylon increases overall durability and resistance to heat

LS1 LS2 LS3 LS6 LS7 Intake Manifold Bolts,Fits GM OEM LS1 LS2 LS3 LS6 LS7 & FAST Intake Manifolds ((Will NOT Fit FAST LS7 & BBK SSI Intakes or OEM LS Truck Intakes),These will fit all OEM and many aftermarket intake manifolds including FAST 92 & 102mm.

Fits GM LS series car intake manifolds from 1997-2014 Camaro, Firebird, Pontiac GTO, Cadillac CTS-V, and Corvette (excluding LT5 engines)

High Quality Material:stainless steel

Convenient kit - includes intake manifold, valve cover and PCV tube assembly to completely address a common problem with GM 1.4L Ecotec engines

Complete repair - manifold failure often leads to valve cover failure, and PCV tube breaks during removal; this kit repairs all three related components

Improved design - included intake manifold is redesigned to correct a frequent PCV valve failure in the original equipment design

Fitment: for Chevrolet Cruze - Sonic 1.8L Engine 2011-2018.For GM 1.8 Liter I4 Ecotec LUW / LWE Engine,fits other vehicles - Engine model #: N18XFH - Chevy - Daewoo - Fiat - Opel corsa astra.

Replace For 55570283.

Intake manifold tuning valve runner actuator linkage , Rod , Arm - attaches to intake manifold AC delco 55570283 - this listing is for the actuator link arm only.This repair is associated with P2076 DTC Code.

Holley Performance 300-117 GM LS Hi-Ram Intake Sys. - 105mm EFI Throttle Bdy

Chevy LS

Intake manifold

Bolt kit

The package length is 1.3 centimeters

The package height is 18.6 centimeters

The package width is 12 centimeters

Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Brand New Holley Modular Lo-Ram EFI Manifold Kit, Front-Feed Plenum, Silver Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-621)

The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. These manifolds are designed for forced induction (supercharged or turbocharged) engine applications & 105mm throttle body part #112-581 or similar models.

The base intake manifold is designed with low height to aid the packaging of a plenum mounted air-to-water intercooler in a top-feed configuration. The 300-621 Lo-Ram front-feed plenum entry was configured to provide a very low profile modular intake manifold suitable for turbocharged or centrifugally supercharged engines.The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors.

[Specification] The intake manifold tuning valve runner arm is made of material of plastic that is durable for your car. The intake manifold tuning valve runner arm is black that brings a perfect suiting for the car.

[Fitment] Fit for Chevy for Chevrolet Cruze 2011–2018 – Motor Sonic 1.8L ,for GM 1.8 Liter I4.

[Replace Part Number] 55570283. This number is essential to your car. When order this item, please make sure that your car replace part number.

IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake

DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more

FITS GM AND CHEVROLET CYLINDER HEADS from 1955 through 1986

Designed for late model GM 4.8/5.3/6.0L port truck engines and all LS1, -2, -6 based engine race applications with appropriate cowl clearance.

Multi-layer modular design with removable runners for easy disassembly and porting.

102mm inlet works with 90, 92, or 102mm throttle bodies for high flow and minimal restriction.

EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver

Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!

Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included.

Outstanding Power Potential; LS Hi-Ram Modular Intake System; Hi-Ram EFI; 102mm Throttle Body; For Use with LS1/2/6

Aggressive and Bold Race Styling

Broad Power Range

4 Piece

Quadrajet Carburetor to Intake Manifold Mounting Bolts

Long Bolts & Short Bolts and Factory Marking TR in with 3 dashes

Intake Manifolds are designed to increase horsepower and torque. They are made of aluminum material with a natural finish. These single plane intake manifolds deliver good throttle response and provides maximum power at high RPM range.

intake manifold comes with single-plane design with a wide RPM range from 2.500 to 7,500 RPM. It features Optimized runner layout and constant cross sectional area with best vehicle performance.

4150 square bore flange with minimum height fits in vehicles that did minimal or no modifications. This manifold is for centrifugal blower/turbocharged/NOS power adder apps.