Best Lab Drying Racks in 2026

Small Size, 17.5 x13.1 inches. Use for over the sink up to 16.5 inches width. [*** NOTE * - Please measure your sink before ordering. If your sink is wider than 16" please order a larger model *** ]. High-end quality, made of FDA food safe grade silicone wrapped stiff metal steel rods.

Resistant to rust, non-slip, durable, glassware friendly, and sturdier than stainless steel racks. Oil-resistant, very easy to clean. Collapsible, rolls up for easy storage. Welcome to compare.

Heat resistant up to 400°F (204°C), BPA-Free, Can be used as heat resistant trivet mat on countertop. Dishwasher Safe

Heavy-Duty Maple Hardwood: Forget flimsy bamboo & chintzy metal drying racks. This one comes in solid maple for rock-hard durability. Holds full loads of soaking-wet laundry without even wobbling.

Furniture-Grade Construction: Made in Pennsylvania's Amish Country (USA), this hand-crafted laundry drying rack features thick 1-1/4" hardwood slats & 3/4" wood dowels for strength & stability.

Ideal for Shirts, Sweaters, Jeans & More: At 52 inches high x 36 wide x 17 deep, this large folding drying rack provides 37 feet of dryer space. Perfect for kids' clothes & all your everyday laundry.

PREMIUM QUALITY || Premium quality test tube stand featuring a sturdy beech wood construction that will stand up to the wear and tear of the lab

ACCOMMODATES 12 TUBES || Supports up to 12 test tubes that measure up to 2cm in diameter - each hole measures 28mm

GREAT FOR CLASSROOM, SCIENCE LABORATORIES AND HOUSEHOLD || Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use. Can be repurposed for use in kitchens, to hold spices or utensils. Great for arts & crafts, for fountain pens and organization

4-TIER Oversized Clothes Drying Rack: Oversized 4-tier design and 2 wing hooks for drying towels, socks, clothes, shoes, quilts, etc. There are a total of 24 pillars, 14 hooks on 2 side wings for additional hanging drying. Sunshine takes moisture away, fresh air flows through clothes on the drying rack; the whole family will enjoy the lovely scent of air-dried laundry.

PREMIUM MATERIAL: Durable long-lasting Premium stainless steel for better rust resistance, thickened carbon steel tube enhanced stability. Dimensions: 67.7H x 19.7W x 30L Inches.

Easy to Fix and Move:4 wheels 8 directional make you easy and convenient to move allowing it to be moved from indoor to outdoor. Each castor is equipped with brake to prevent the rail from moving when locked.

Fits 20 - 25mm Test Tubes

Hole Diameter: 25mm

6 Holes and 6 Drying Pins

PACKAGE LIST: 2 pieces Test Tube Holder and Drying Rack

MATERIAL: Plastic, 20mm in diameter

Holds 6 test tubes up to 20mm in diameter for lab experiments

Holds up to 90 pieces of labware

Self-standing or wall mountable

Spot-welded steel construction provides durability and vinyl coating protects glassware from chips and cracks

Pack of two (2) blue plastic 50 peg test-tube drying rack. Holds 16mm tubes.

Racks can also be used to hold and dry electrophoresis and chromatography plates.

Rack dimension 7.375 x 4 x 2.75 inches

Comes in both blue and white polypropylene

Autoclavable for sterilizing, with six pins for drying tubes

Blue for visual identification

Lab drying rack with fine workmanship and creative appearance design will ensure its popularity and practicality.

The test tube drying draining rack is very suitable for the laboratory to organize and dry test tubes.

Tube drying draining rack is metal material, excellent and practical, which can be safely and durably used for long time.

【Simple in structure】24 peg drying draining rack is easy to use, and sturdy, you can use it with confidence.

【Tube Rack for Drying】Unique appearance design, easy to drain the remaining liquid, and. It will meet your needs!

【No wear and tear】Metal Tube Draining Rack make it have a good touch feeling, practical and durable, and can serve you for long time.

Blue plastic 50 peg test-tube drying rack. Holds 16mm tubes.

Rack can also be used to hold and dry electrophoresis and chromatography plates.

Rack dimension 7.375 x 4 x 2.75 inches

The Test Tube Rack is strong, tough, versatile tube rack for bench top working or tube storage

autoclavable and made from fiberglass-reinforced polypropylene

The peg tube rack's versatitly allows the unit to be used as a drying rack, for glass plates or upside-down tubes.

Product Type: drying racks/stands

Material: Polyethylene

Length (in.): 16.5

【HIGH-CAPACITY DESIGN】- The drying rack can hold up to 90 pieces of glassware on 18 x 5"/12.7 cm pegs and 72 x 3"/7.6 cm pegs. The longer pegs make the glassware more firm and secure, stopping the container from falling. Different spacing can match different sizes of utensils to meet various daily needs.

【SUPERIOR DRYING FUNCTION】- The bottom of the lab glassware rack is equipped with a drainage tray to collect residual water. You can take it out at will, which helps to better dry test tubes, beakers, flasks, glassware, and other laboratory appliances.

【PREMIUM STEEL CONSTRUCTION】- The item's material is steel wire, which is sturdy and durable. Spot welding with steel structure provides long service life. Our lab rack is also vinyl-coated to avoidt the glassware from fragmenting.

✔Retractable & Foldable Space-Saver Rack: This wall mount clothes drying rack maximizes your existing closet space and also keeps your laundry room organized. It is easy to assemble, and can be folded to save space when not in use. The hanging clothes drying rack is very easy to store and can be used for a long period of time.

✔Durable and Strong: This unique triangular shaped rack is made of high quality, durable plastic and is supported by a non-corroding metal bar for added stability. The measurement of this wall mounted drying racks for laundry room is (8.5 x 1.7x 14.5 inches). It gives you as much as 15 inches of space to hang your clothes and is lab tested to hold over 50 lbs of sheer weight.

✔Multi-Functional: Folding design, space-saving, storage convenience are just a few of the benefits of a wall mount drying rack. Ideal for keeping clothes, convenient and organized in the bedroom, bathroom, balcony, living area, or laundry room.

Product Size: 70 X 55.3 X 12.7cm / 27.5 X 21.8 X 5"

Detachable Pegs: This drying rack has 52 pegs(5.1" Length each), easy to assemble and detach on your needs

Wide Application: Good drying rack for laboratory, medical, chemical, quality test, school, research institute etc

Package:A Pack of Plastic 8-Well Test Tube Rack

Material:plastic Size:approx 24.5cm X 7cm X 8cm(L X W X H),20.6mm in hole diameter

Made of premium material,durable,safe to use.Thick bottom, not easy to damage and strong.

Fit: For 12 - 16mm tubes.

Capacity: Holds 66 test tubes.

Rack Size: 170mm Lx 92mm W x 62mm H, detailes shown as the picture.

[WIDE APPLICATION] This drying rack is widely used in laboratories, medicine, chemical industry, chemical laboratories, quality inspection, research institutes, schools, scientific research institutions and other places.

[HIGH EFFICIENCY] This laboratory drying rack helps to dry test tubes, beakers, flasks, glassware and other laboratory supplies, allowing the containers to dry faster for the next use. There is a tray hole and a water outlet hose at the bottom to better prevent the liquid in the container from leaking out.

[PREMIUM MATERIAL]This laboratory drying rack is made of environmentally friendly PP material, which is very corrosion resistant, so there is no need to worry about being corroded by chemicals. The drying rack has 27 nails/52 nails(each nail is 5 inches long), which is easy to assemble and disassemble, and can be easily installed on the wall or hung on the wall. It is very durable and is an ideal choice for laboratory drying racks.

✅►【𝐇𝐢𝐠𝐡 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥】Apply environmental-friendly PP material, this lab drying rack is anti-corrosion, acid and alkali resistant.sturdy & durable

✅►【𝐆𝐨𝐨𝐝 𝐃𝐫𝐲𝐢𝐧𝐠 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧 𝐃𝐫𝐚𝐢𝐧𝐚𝐠𝐞 𝐒𝐲𝐬𝐭𝐞𝐦】Help to dry tubes, beakers, flasks, glassware, and other lab wares. With a tray hole at bottom and a outlet hose for better water drain and leak-proof.Also equipped with 30" (760mm)vinyl tubing for better drainage.

✅►【𝐃𝐞𝐭𝐚𝐜𝐡𝐚𝐛𝐥𝐞 𝐏𝐞𝐠𝐬】This drying rack has 52 pegs,5.1"(125mm) Length each, 0.35" (9mm)dia.Each peg is arranged in a staggered row, saving more space. The drying peg is removable for easier cleaning, and you can freely disassemble and assemble as needed.

Product Size:15.7*4.7*21.6"/ 400*120*550mm; Built-in molded draining tray 22 inch (550mm) x 4.8 inch (120mm), with hole in the tray for drainage, supplied with 30 inch (760mm) of vinyl tubing.

Detachable Pegs: This drying rack has 27 pegs(5.1" Length each), easy to assemble and detach on your needs

Wide Application: for laboratory, medical, chemical, quality test, school, research institute etc

Detachable Pegs: This drying rack has 27 pegs, easy to assemble and detach on your needs.

Wide Application: for laboratory, medical, chemical, quality test, school, research institute etc

Product Size:15.7*4.7*24"/ 400*120*610mm; Built-in molded draining tray, with hole in the tray for drainage, supplied of vinyl tubing.

Product Size: 70 X 55.3 X 12.7cm / 27.5 X 21.8 X 5"; Built-in molded draining tray, with hole in the tray for drainage, supplied with 30 inch (760mm) of vinyl tubing.

Detachable Pegs: This drying rack has 52 pegs (5.1" Length each), easy to assemble and detach on your needs

Wide Application: for laboratory, medical, chemical, quality test, school, research institute etc

✅【𝐑𝐞𝐦𝐨𝐯𝐚𝐛𝐥𝐞 𝐏𝐞𝐠𝐬】This lab drying rack has 27 pegs, each 5" long, 0.35" dia. Each peg is arranged in a staggered row, saving more space. The drying peg is removable for easier cleaning, and you can freely disassemble and assemble as needed.

✅【𝐃𝐫𝐲𝐢𝐧𝐠 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬】The lab glassware rack has drainage holes on the bottom tray and is equipped with 30" vinyl tubing for better drainage.

✅【𝐏𝐏 𝐂𝐨𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧】 The material of this item is polypropylene, which is sturdy and durable. This solid PP material is immune to corrosion, thus providing long service life.

High Quality -- This product adopts environmentally friendly PP material, and the laboratory drying rack is anti-corrosive and durable.

Easy Draining -- Helps to dry tubes, beakers, flasks, glassware and other laboratory supplies. There is a tray hole and a water outlet hose at the bottom for better drainage and leakage prevention.

Detachable Pegs -- This drying rack has 27 or 52 pegs (each 5 inches long) for easy assembly and disassembly, and can be easily mounted on a wall or hung on a wall.

Product Size:15.7*4.7*21.6"/ 400*120*550mm; Built-in molded draining tray 22 inch (550mm) x 4.8 inch (120mm), with hole in the tray for drainage, supplied with 30 inch (760mm) of vinyl tubing.

Detachable Pegs: This drying rack has 27 pegs(5.1" Length each), easy to assemble and detach on your needs

Wide Application: for laboratory, medical, chemical, quality test, school, research institute etc

metal material, excellent and practical, which can be safely and durably used for long time.

The classic and simple design will ensure its practicability and popularity, so you can use it with confidence.

Fine workmanship and creative appearance design will ensure its popularity and practicality.

Wall mounted laboratory drainage rack, suitable for any wall or plane.

Bottle dryer rack has 24 pins with rubber caps, which are sufficient to place many items and effectively damage and scratches to the test tube.

Suitable for any scientific research institute, laboratory, home kitchen and classroom.

You will have good use experience because of the perfect workmanship of this products

Suitable for laboratories such as scientific research, industrial and mining enterprises, universities and college

The laboratory drain rack is sturdy and durable and has a wide range of uses. suitable for bench work or test tube storages