Best Lab Microcentrifuge Tube Racks in 2026

PREMIUM QUALITY || Premium quality test tube stand featuring a sturdy wood construction that will stand up to the wear and tear of the lab

12 test tube capacity

Fits test tubes of up to 22mm in diameter

HIGH QUALITY: This floral tube rack is made of solid plastic, sturdy, light weight and durable to use.

HOLDS 21 TEST TUBES: Measures approx 25 * 10.5 * 7cm/9.8 * 4.1 * 2.75in (assembled). Can hold 21 pieces tubes totally.

DETACHABLE: This plastic tube holder comes 3 separated pieces, assemble required; can be stored put together or taken apart and laid flat, won't take up much more space.

Microcentrifuge tube rack is made of polypropylene, acid and alkali resistant, thickened material, durable, washable and reusable.

AB side design, A side is suitable for 0.2ml/0.5ml centrifugal tube Side B is suitable for 1.5ml/2ml centrifugal tube.

The hole diameter of A side is 0.8cm/0.315inch, the hole diameter of B side is 1.2cm/0.47inch, and each side has 60 holes.

Microcentrifuge tube rack is made of polypropylene, acid and alkali resistant, thickened material, durable, washable and reusable.

AB side design, A side is suitable for 0.2ml/0.5ml centrifugal tube Side B is suitable for 1.5ml/2ml centrifugal tube.

The hole diameter of A side is 0.8cm/0.315inch, the hole diameter of B side is 1.2cm/0.47inch, and each side has 60 holes.

Set of five 80-well microcentrifuge PCR tube racks accommodates 0.5mL, 1.2mL, and 2.0mL microcentrifuge tubes or PCR tubes

16 x 5 configuration for freezing, storage, transport, and benchtop use

Autoclavable at 250 degrees F and 15psi for 15 minutes

SIZE: 5 Pcs tube racks 60-well per side (12mm diameter and 8mm diameter)

COLOR: Green, blue, orange, purple and red. Show as the picture.

MATERIAL：Polypropylene.

Name: 60 Positions Tube Rack Double Panel. Material: Polypropylene, Autoclavable at 250 degrees F and 15psi for 20 minutes. Color: Blue,Orange

One side of the tube rack accommodates 0.2ml to 0.5ml microcentrifuge tubes. The reverse side can hold 1.5ml microcentrifuge tubes

Sold as two-pack of tube rack

HIGH QUALITY: This floral tube rack is made of solid plastic, sturdy, light weight and durable to use.

HOLDS 60 TEST TUBES(0.62"): Measures approx 25 * 10.5 * 7cm/9.8 * 4.1 * 2.75in (assembled). Can hold 60 pieces tubes totally.

DETACHABLE: This plastic tube holder comes 3 separated pieces, assemble required; can be stored put together or taken apart and laid flat, won't take up much more space.

Material: Polypropylene (PP), Autoclaved

Dimension: 21cm* 11cm* 2.5cm. Weight: 189g

One side well is 11.4mm well diameter, another slide well is 7.7mm diameter. Each slide is 96 wells

HIGH QUALITY: This floral tube rack is made of solid plastic, sturdy, light weight and durable to use.

HOLDS 60 TEST TUBES(0.62"): Measures approx 25 * 10.5 * 7cm/9.8 * 4.1 * 2.75in (assembled). Can hold 60 pieces tubes totally.

DETACHABLE: This plastic tube holder comes 3 separated pieces, assemble required; can be stored put together or taken apart and laid flat, won't take up much more space.

【Package Include】-- 5pcs test tube display stands of five different colors (Due to different production batches, there may be color differences in the products. Please refer to the actual received color as the standard) for PCR and microcentrifuge, suitable for 0.5ml, 1.5ml & 2ml test tube.

【Double Panel Available】--The microcentrifuge PCR tube rack can be used with both side suitable for experimental projects, different color also make it easier to distinguish.

【Premium Material】-- Made of eco-friendly plastic (PP), durable, non-toxic and odorless, keep you safe while using it.

Material: Polypropylene(PP)

Suitable for 96-well PCR plates and 0.2 ml PCR tubes (8 rows × 12 columns)

Dimensions(With Transparent Cover): 12.5 x 8.7 x 3cm; Each Weight: 62g

Perfect for incubating microtubes in a beaker of water

Buoyant TPX brand polymethylpentene with tiny bubbles throughout for additional buoyancy

Insert tubes from the top and easily remove them by pressing the rack down on the bench

Material: Polypropylene (PP), Autoclaved. Assorted Colors, Blue, Green, White, Purple, Orange (Pack of 5)

Dimension: 21cm* 11cm* 2.5cm. Each Weight: 189g

One side well is 10.5mm well diameter, another slide well is 8.7mm diameter. Each slide is 96 wells

Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121 degree C (250 degree F)

Supports 50ml plastic centrifuge tubes in individual wells, each 30mm square

Use to organize tubes for storage and processing

Ideal for mimicking the 96-place format used in microplates, deep-well plates and other tools configured for drug discovery and robotic

Holds 15ml (13-16mm) tubes in an 8 x 12 configuration

Flow-through design allows rapid temperature changes of samples when transferring between ice bath and heated water bath

【HIGH-CAPACITY DESIGN】- The drying rack can hold up to 90 pieces of glassware on 18 x 5"/12.7 cm pegs and 72 x 3"/7.6 cm pegs. The longer pegs make the glassware more firm and secure, stopping the container from falling. Different spacing can match different sizes of utensils to meet various daily needs.

【SUPERIOR DRYING FUNCTION】- The bottom of the lab glassware rack is equipped with a drainage tray to collect residual water. You can take it out at will, which helps to better dry test tubes, beakers, flasks, glassware, and other laboratory appliances.

【PREMIUM STEEL CONSTRUCTION】- The item's material is steel wire, which is sturdy and durable. Spot welding with steel structure provides long service life. Our lab rack is also vinyl-coated to avoidt the glassware from fragmenting.

Package Content - 2pcs x PCR Tube Rack

High Temperature Resistance: Autoclavable at 250 degrees F and 15psi for 15 minutes.

Total Size: 7.8 x 2.9 x 0.9Inch/19.7 x 7.3 x 2.3cm(L*W*H); Hole Diameter: 0.43Inch/1.1cm

Material: Polypropylene (PP), Autoclavable at 250 degrees F and 15psi for 20 minutes.

Dimension: 14.9cm*5.4cm*2.9cm

Four different hole diameter：6.75mm，8.20mm，11.15mm，14.21mm

Test tubes 'hang in there' in any position, even inverted

Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work

Rack made of a special blend of autoclavable polypropylene that is heavier than water for submerging into water baths

Used for 0.2ml, 1.5ml and 2.0ml micro centrifuge tubes or PCR tubes

Hole diameter comes with 10.2mm for 80-well, 7mm for 60-well

Each rack can hold different sized micro centrifuge tubes on each side, One Side (1.5ml or 2ml tubes-80 well), The Other Side 2 (0.2ml tubes - 60 well)

Package Include: 2 x 60-well microcentrifuge PCR tube racks

Scope of Application: Can accommodates 0.5mL, 1.2mL, and 2.0mL microcentrifuge tubes or PCR tubes.

Total Size: 7.8 x 2.9 x 0.9Inch/19.7 x 7.3 x 2.3cm(L*W*H), Hole Diameter: 0.43Inch/1.1cm

Mini stand for 1.5/0.5 ml microcentrifuge tubes.

Small, space-saving design. Size: 2 1/4" x 1 1/2" x 1 1/8" (60 mm x 35 mm x 30 mm).

Made of PLA plastics. Not autoclavable. Random color.

Used for 0.5ml, 1.5ml and 2.0ml micro centrifuge tubes or PCR tubes

Hole diameter comes with 10.8mm and 8.8mm

Each rack can hold different sized micro centrifuge tubes on each side, One Side (1.5ml or 2ml tubesl), The Other Side 2 (0.5ml tubes)

Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read

Supports six 25mm or eight 18mm tubes and includes six drying pins

Steam autoclavable at 121 degree C (250 degree F)

Name: 96-well double-sided test tube rack

Product material: Polypropylene, Autoclavable

Color: Orange, Blue, Red, Green, Purple, a total of 5PCS

Unique immobilizing tabs keep tubes secure and caps closed, protecting your samples from loss and contamination

For use in water baths, ice or on the benchtop; holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations

Raised handle provides easy lifting without agitating samples; stable feet keep rack upright on the bench

Hemispherical wells in the lower deck cradle tubes

Sturdy, stable polypropylene construction

Handles at each end for easy transport