Best Uxcell Lab Tube Racks in 2026

HIGH QUALITY: This floral tube rack is made of solid plastic, sturdy, light weight and durable to use.

HOLDS 40 TEST TUBES(0.78"): Measures approx 25 * 10.5 * 7cm/9.8 * 4.1 * 2.75in (assembled). Can hold 40 pieces tubes totally.

DETACHABLE: This plastic tube holder comes 3 separated pieces, assemble required; can be stored put together or taken apart and laid flat, won't take up much more space.

Microcentrifuge tube rack is made of polypropylene, acid and alkali resistant, thickened material, durable, washable and reusable.

AB side design, A side is suitable for 0.2ml/0.5ml centrifugal tube Side B is suitable for 1.5ml/2ml centrifugal tube.

The hole diameter of A side is 0.8cm/0.315inch, the hole diameter of B side is 1.2cm/0.47inch, and each side has 60 holes.

Material: Acrylic(PMMA). It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Construction is durable and chemical resistant.

Fit for 10ml,15ml tubes.

10ML Tube Rack Test Tube Holder 6 Wells for 13-16mm Tubes. It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Size: 136mm x 50mm x 80mm / 5.35" x 2" x 3.15"(L*W*H).Note: Please check the diameter and height of your tubes before ordering. The diameter should be less than 16mm and the height should be higher than 71mm.

Made of acrylic, durable and lightweight.(Comes with a layer of film on the surface, please tear off before use)

HIGH QUALITY: This floral tube rack is made of solid plastic, sturdy, light weight and durable to use.

HOLDS 60 TEST TUBES(0.62"): Measures approx 25 * 10.5 * 7cm/9.8 * 4.1 * 2.75in (assembled). Can hold 60 pieces tubes totally.

DETACHABLE: This plastic tube holder comes 3 separated pieces, assemble required; can be stored put together or taken apart and laid flat, won't take up much more space.

HIGH QUALITY: This floral tube rack is made of solid plastic, sturdy, light weight and durable to use.

HOLDS 40 TEST TUBES(0.78"): Measures approx 25 * 10.5 * 7cm/9.8 * 4.1 * 2.75in (assembled). Can hold 40 pieces tubes totally.

DETACHABLE: This plastic tube holder comes 3 separated pieces, assemble required; can be stored put together or taken apart and laid flat, won't take up much more space.

10ML Tube Rack Test Tube Holder 2x6 Wells for 13-16mm Tubes. It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Made of acrylic, durable and light weight.(Comes with a layer of film on the surface, please tear off before use)

Size: 136mm x 50mm x 80mm / 5.35" x 2" x 3.15"(L*W*H).

Made of 304 Stainless Steel, durable and light weight, easy to carry. It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Highly polished surface, no edges and sharps, chemical and corrosion resistant.

Fit for 14 to 16mm test tubes, round holes, hold 40 tubes. Note: Please check the diameter and height of your tubes before ordering.

Fit for 11mm to 13mm test tubes, round holes, hold 30 tubes. It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Made of acrylic, durable and light weight.(Comes with a layer of film on the surface, please tear off before use)

Size: 190mm x 60mm x 70mm / 7.48" x 2.36" x 2.76"(L*W*H).

10ML Tube Rack Test Tube Holder 6 Wells for 14-16mm Tubes.

Made of acrylic, durable and light weight.(Comes with a layer of film on the surface, please tear off before use)

Size: 136mm x 50mm x 80mm / 5.35" x 2" x 3.15"(L*W*H).Note: Please check the diameter and height of your tubes before ordering. The diameter should be less than 16mm and the height should be higher than 71mm.

Material: Acrylic(PMMA). It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Construction is durable and chemical resistant.

Fit for 0.2ml,10ml tubes.

Material: Acrylic(PMMA). It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Construction is durable and chemical resistant.

Fit for 1.5ml,2ml tubes.

Material: Polypropylene(PP)

Suitable for 96-well PCR plates and 0.2 ml PCR tubes (8 rows × 12 columns)

Dimensions(With Transparent Cover): 12.5 x 8.7 x 3cm; Each Weight: 62g

Material: Acrylic(PMMA). It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Construction is durable and chemical resistant.

Fit for 0.2ml,1.5ml tubes.

Made of 304 Stainless Steel, durable and light weight, easy to carry. It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Highly polished surface, no edges and sharps, chemical and corrosion resistant.

Fit for 26 to 29.5mm test tubes, round holes, hold 10 tubes.

【HIGH-CAPACITY DESIGN】- The drying rack can hold up to 90 pieces of glassware on 18 x 5"/12.7 cm pegs and 72 x 3"/7.6 cm pegs. The longer pegs make the glassware more firm and secure, stopping the container from falling. Different spacing can match different sizes of utensils to meet various daily needs.

【SUPERIOR DRYING FUNCTION】- The bottom of the lab glassware rack is equipped with a drainage tray to collect residual water. You can take it out at will, which helps to better dry test tubes, beakers, flasks, glassware, and other laboratory appliances.

【PREMIUM STEEL CONSTRUCTION】- The item's material is steel wire, which is sturdy and durable. Spot welding with steel structure provides long service life. Our lab rack is also vinyl-coated to avoidt the glassware from fragmenting.

50ML Tube Rack Test Tube Holder 8 Wells for 26-30mm Tubes. Note: Please check the diameter and height of your tubes before ordering.

Made of polypropylene, durable and light weight.

Size: 154mm x 105mm x 100mm / 6.06" x 4.13" x 3.94"(L*W*H).

Made of stainless steel, durable and light weight, easy to carry.

Highly polished surface, no edges and sharps, chemical and corrosion resistant.

Fit for 10 to 13mm test tubes, square holes, hold 50 tubes.

Made of 304 Stainless Steel, durable and light weight, easy to carry. It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Highly polished surface, no edges and sharps, chemical and corrosion resistant.

3 Layer, fit for 26 to 30mm test tubes, round holes, hold 8 tubes.

Made of 304 Stainless Steel, durable and light weight, easy to carry. It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Highly polished surface, no edges and sharps, chemical and corrosion resistant.

Fit for 26 to 30mm test tubes, round holes, hold 6 tubes. Note: Please check the diameter and height of your tubes before ordering.

Material: Acrylic(PMMA). It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Construction is durable and chemical resistant.

Versatile design accommodates different tube sizes on two sides.

10ML Tube Rack Test Tube Holder 12 Wells for 14-16mm Tubes. It can be used to place the test tube in an orderly manner in the laboratory, so as to save a lot of space, and can be used as a carrier to better move the test tube.

Made of acrylic, durable and light weight.(Comes with a layer of film on the surface, please tear off before use)

Size: 264mm x 50mm x 80mm / 10.39" x 2" x 3.15"(L*W*H).

Name: 60 Positions Tube Rack. Color: Green/Purple/White/Blue/Orange

Material: Polypropylene, Autoclavable at 250 degrees F and 15psi for 20 minutes

One side well is 11.5mm well diameter, another slide well is 7.7mm diameter. Each slide is 60 wells

Material: Polypropylene, Autoclavable at 250 degrees F and 15psi for 20 minutes

Seven different hole diameter：5.2mm，7.6mm，12.1mm，8.2mm, 10.7mm, 16.9mm, 29.3mm

Suitable for storage of common centrifuge tubes in the laboratory, like 0.2ml PCR Tube, 0.5ml, 1.2ml, 1.5ml, 2ml, 5ml, 15ml, 50ml Centrifuge Tube