Best Benchtop Lab Oscilloscopes in 2026

Analog channel bandwidth:50 MHz

4 analog channels

Real-time sample rate up to 1 GSa/s

FASTER SAMPLING SPEED - 2.5Msps high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring.3 waveform scanning modes: automatic/conventional/single. Improve work efficiency. You will receive ET828 or LM2020, they are same product, have same function, LM2020 is our updated name.

MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40MΩ, Capacitance 0 ~ 100μf, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50Ω. Transistor amplification test to meet all test requirements.

MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately. To enable Quiet Mode (disable keypress beeps), press and hold the "F4" button and then rotate the rotary knob to turn on the instrument.

【Scope Mode】: 1. The waveform refresh rate is up to 10000wfms / s; 2. Oscilloscope 2 channel input, bandwidth up to 50MHZ, better signal reception. Real-time sampling rate 250MSa / s, recording length up to 8k dots; 3. Cursor measurement function; 4. 7 kinds of automatic measurement functions; 5. XY function; 6. One key automatic setting function, convenient for detecting and debugging.

【Meter Mode】: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test; 2. Auto range function, convenient for testing and debugging; 3. The maximum input voltage is AC 750V, DC 1000V; 4. Independent multimeter and oscilloscope input; 5. Reading the wait function; 6. Relative measurement function.

【Portable Oscilloscopes】: USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. The computer can read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data.

this auto diagnostic oscilloscope is with 8Channels, 2.4MSa/s Real-Time Sampling Rate

EASY TO USE -- Installs the PC software and start to use without any other drivers;

USB2.0 power supply + communication interface, plug and play, and support hot plugging.

Faster Sampling Speed: Digital oscilloscope has a real-time sampling rate of 2.5MS/s, a bandwidth of 200KHz, 80KHz Pwm，and a complete trigger function (single, normal, automatic). Equipped with efficient one-key AUTO, the measured waveform can be displayed without tedious adjustment. It can be used freely for both periodic analog signals and aperiodic digital signals, and can measure voltages up to ±400V

More Powerful Detection Range: A cost-effective handheld oscilloscope for people in the maintenance industry and R&D education industry. The highly practical oscilloscope can meet your daily testing needs

Clearer Lcd Display: Portable oscilloscope is equipped with a 2.4-inch high-definition LCD screen with a resolution of 320*240, which is small in size and has strong anti-overload capability

7 inches color LCD screen,800*480 resolution, bright color and high contrast. You can adjust the screen brightness and background grid brightness according to your needs.Thin and light, easy to carry.

Built-in DDS signal generator, support 12 kinds of functional signals. Cursor measurement function, convenient manual measurement period, frequency and voltage. Built-in high voltage protection module, can withstand up to 400V continuous voltage, without fear of burning out.

Equipped with efficient one-button automatic, without tedious adjustment can display the measured waveform, one key to save the waveform. Built-in 1GB storage space. Very convenient screen capture and waveform storage functions. It can store up to 1000 screenshots + 1000 groups of waveform data. Equipped with USB interface, can be connected with the computer, convenient for secondary analysis.

【Faster sampling speed】 Mivofun mini oscilloscope has a real-time sampling rate of 2.5MS/s and a 200KHz bandwidth. The 10x probe can measure up to 800VPP, which is equivalent to 280V AC. Voltages up to ±400V can be measured.

【Cost Effective & MORE ACCURACY 】 Features with full trigger function (AUTO/Normal/Single). Works perfectly for both periodic analog signals and aperiodic digital signals. Built -in PWM square wave output. 2.4-inch high-definition LCD display screen, a resolution of 320*240, Type-C interface supports data transmission and charging.support interface to update firmware directly.

【Portable Small Practical Oscilloscope】 Mivofun pocket oscilloscope is an Assembled finished Machine, lightweight and easy to carry, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time. Applicable to the workplace such as family, school, and factory.

4 analog channels, 1 arbitrary waveform generator, 1GSa/s sampling rate, 250MHz bandwidth

Over 20 functions, including pass/fail test, trigger, dynamic cursor tracking, waveform record and replay

Heat-resistant and scratch-proof compact case, powered by connecting to computer USB ports

2 Channel Digital Oscilloscope + Arbitrary Waveform/Function Generator + Synchronizing Signal + External Trigger.

7 inch 64 k color LCD display, Resolution 800 x 480.

32 kinds of Automotive measurement with FFT function.

☑Updated 2 Channels & High Bandwidth：2CH oscilloscope, 120MHz bandwidth, minimum measurement range 10mV /div, 500MSa/s sample rate,advanced digital trigger system.Up to 120M bandwidth can easily cope with mearsurement testes in various fields. Such as mcu debugging, car repair, home appliance repair, personal DIY, electronic competition, power supply debugging, inverter, etc. It can also be used as a portable tool for on-site debugging.

☑FFT Spectrum & Cursor Measurement: The professional portable oscilloscope with FFT display function, can analyze the spectral characteristics of the signal. Cursor measurement function, convenient manual measurement period, frequency and voltage.

☑3 Trigger Modes & One-key AUTO: The DIY oscilloscope kit configured 3 trigger modes, auto/normal/single trigger. Support waveform parameter setting,such as time base, amplitude, trigger slope, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement.

[Unparalleled Operating Experience] 8-inch TFT-LCD capacitive touch screen with 800 * 600 resolution, integrates a new generation of hardware & software technologies.

[70Mpts Memory Depth] Hardware-based Zoom technology and up to 70Mpts memory depth, allow users to move and browse waveforms as much easier and quickly zoom in to focus on the interested area.

[31 Auto Measurements] All 31 types of automatic measurements can be displayed on one screen, one touch to clear, the best auto measurement on the market.

Upgraded Mini Oscilloscope : 320*240 resolution color TFT LCD display, ARM+FPGA+ADC architecture, with 18M bandwidth and 40M sampling rate, more stable and with higher precisions, easily cope with measurement tests in various fields. Various performances are far superior to the 138 Pro oscilloscopes on the market.

Professional Designed : 154 Pro oscilloscope configured 3 trigger modes, auto/normal/single, 2 trigger types, rise/fall, 2 trigger level, manual/auto. 14 measurement options available. Support waveform parameter setting,such as time base, amplitude, etc.

Signal Generator : 154 Pro oscilloscope can output voltage 3V, frequency 0-500KHz adjustable, the accuracy is up to 0.1Hz. The duty cycle adjustment-range is 1%-99%. It can be used to calibrate new probes, drive mosFETs, replace crystals, etc.