Best Hanmatek in 2026

【Auto Power Calculation】 - Intelligently calculates output voltage and current into power and displays the value on its large screen.; decimal point automatic carry & LED 4 digits display of voltage function displays.current and powe; The keyboard can be locked to prevent misoperation.

【Output switch control】 - Sometimes we need to switch between different voltage or current outputs, but we often forget to unplug the previous instrument and cause the instrument to burn out.,which often occurs in the maintenance.Output key is designed to solve this problem.By pressing the Output key, the required voltage and current can be adjusted without the actual output power,Which makes this DC power supply more secure and more energy efficient.

【Safe and Reliable to Use】 - Safety is our priority. The built-in fan low arc noise & low ripple,The power supply is durable and compact. Productive work since the power supply comes multiple protection of Over-voltage, over-current, over-power, over-temperature, short-circuit powerful protection function.

[Rechargeable] Because this product is designed to be rechargeable, it can be used continuously for a long time, and the rechargeable battery has a large capacity. No matter where you are, it excels in a variety of scenarios. You can charge the charging port by connecting to the Micro USB charging port (for Android) or plugging in the USB port.

[Lighting function] Equipped with safe highlight LED even in dark places! The main unit is equipped with a front LED lighting lamp that lights up while the driver is working, making it easy to work in dark places where screw holes are difficult to see. The flashlight on the back enhances visibility in the dark and can be used in situations such as power outages or emergency lights

[You can switch between forward rotation and reverse rotation] By adjusting the position of the forward rotation rod and reverse rotation rod, you can not only tighten the screw but also switch the drill rotation direction by loosening the screw . It is easy to operate simply by pressing the front and rear levers, and can be widely used for furniture assembly.

【More Accurate Data】: Automotive multimeter tester, oscilloscope, DMM and waveform generator in one. Upgraded oscilloscope 2 channel bandwidth up to 100MHZ, high signal fidelity, excellent performance. it uses a powerful and intelligent chip to ensure the accuracy of acquisition and measurement.

【More Memory, Faster Waveform Updates】: High refresh, deep storage, waveform refresh rate up to 10,000wfms/s, 8K storage depth, easily capture abnormal events, low probability events. Fast and accurate measurement results are provided, and multiple sets of waveforms can be saved. Four kinds of automatic measurement functions, XY function, one-touch automatic setting function, etc., easy to test and debug.

【More Measurements, Better Measurement Display】: Support 7 kinds of automatic measurements, frequency, period, amplitude, maximum, minimum, average, peak-to-peak value. Fast auto-calibration function, up to 6 automatic measurement values can be displayed on the screen at the same time. It can also connect the computer, the computer can read stored images and CSV waveforms for further analysis or sharing.

Scope Mode:The waveform refresh rate is up to 10000wfms / s. 2. Dual channel input, bandwidth up to 100MHZ, real-time sampling rate 250MSa / s, recording length up to 8k dots. 3. Cursor measurement function. 4.7 kinds of automatic measurement functions. 5. XY function. 6. One key automatic setting function, convenient for detecting and debugging.

Meter mode: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test. 2. Auto range function, convenient for testing and debugging. 3. The maximum input voltage is AC 750V, DC 1000V. 4. Independent multimeter and oscilloscope input. 5. Reading the wait function. 6. Relative measurement function.

USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. After connecting to the computer, the computer can recognize the oscilloscope as a USB flash drive and read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data.

【Scope Mode】: 1. The waveform refresh rate is up to 10000wfms / s; 2. Oscilloscope 2 channel input, bandwidth up to 50MHZ, better signal reception. Real-time sampling rate 250MSa / s, recording length up to 8k dots; 3. Cursor measurement function; 4. 7 kinds of automatic measurement functions; 5. XY function; 6. One key automatic setting function, convenient for detecting and debugging.

【Meter Mode】: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test; 2. Auto range function, convenient for testing and debugging; 3. The maximum input voltage is AC 750V, DC 1000V; 4. Independent multimeter and oscilloscope input; 5. Reading the wait function; 6. Relative measurement function.

【Portable Oscilloscopes】: USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. The computer can read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data.

[Programmable DC Power Supply]: This programmable DC power supply has a standard USB interface on the back and supports the Modbus programming instruction set. Hardware list With programmable sequence output. Six groups of quick parameter storage features.

[High accuracy]: The HANMATEK variable DC regulated power supply can display the output current, voltage, and power in 4 digits. At the same time, the time can be displayed and the decimal point is automatically rounded up. Output voltage: 0-30V, output current: 10A. Voltage resolution: 10mv; Current resolution: 1mA.

[Reliability and Safety]: This variable DC regulated power supply has five powerful functions: overvoltage protection (OUP), overcurrent protection (OCP), overpower protection (OPP), overheat protection (OTP), and short-circuit protection. It has a protective function. With the automatic temperature control cooling fan, the cooling fan turns on automatically when the operating temperature exceeds 45 ° C.

【Professional Stud Finder】: 5 scanning functions. Suitable for detecting metal, wood, magnetic and AC wires, it can accurately and quickly determine the position of nails, screws, rebar, wooden beams, wires, etc. It can precisely test the position and distance of objects.

【Easy To Read】: The signal strength display area on the display screen can clearly show the distance to the metal object. Scan mode, detection depth, detection signal strength, battery indicator and center point can all be seen on the screen.

【Fast And Accurate】: The wall scanner detector can be calibrated automatically, simply by pressing the metal detection button.

Multifunction Cable Tester: It can be used directly on RJ11, RJ45 and other metal wires through adapter. You can find the cable wire without stripping the outer skin of the wire. It can also identify the location of broken wires.

Professional WT1 Wire Tracer: WT1 can quickly and reliably measure continuity. Automatically and efficiently scans for leaks, disorder cable, open and short circuit. Also identifies the status of working telephone lines (clear, ringing, busy), TIP or RING wires.

Adjustable Volume: You can adjust the volume through the headset or receiver to make it easy for you to locate the network cable while clearly hearing the sound. When you are not sure whether the new crystal head matches your wires, then this tool can help you and protect the wires better.

Portable charger with two USB-A ports (12 Watts each). Charges up to 2 devices at a time

Apple MFi Certified ensures complete compatibility with iPhone 14/13/12/11/X/XR/XS/8/7/6/6s/5/5s/5c, iPhone Pro 13/12/11, iPhone Pro Max 13/12/11/XS, iPhone Plus 14/8/7/6/6s, iPhone SE 1st Gen/2nd Gen/3rd Gen, iPhone mini 13/12, Apple iPad, iPad Air, iPad Mini, iPad Pro, iPod Touch, iPod nano, Beats Pill+, Samsung Fold Z/ Galaxy S22/ S20/ S10/ S9/ S9 Plus/ S8/ S8 Plus/ S7/ S7 Edge/ S6/ S6 Edge/ S5/ Note 20 10 9 7/ 930QCG/ Google Nexus 6P/5X, Google Pixel 3/3XL/2/2XL, HTC One M9+/M9/A9/M8/E8, Motorola Razer, Moto Z, Huawei Mate10, P30/ P20, Blackberry, Nokia, Sony, LG U, LG G Stylo, LG G6/G5/G4/G3, LG V30/V20, PH-1, and any other USB outlet devices

Built-in device detection; provides up to 4.8 amps of power (each port 2.4 amps max); does not support Quick Charge; devices equipped with Quick Charge will charge at normal speed

Delivers 430W continuous output at +40℃. Compliance with Intel ATX 12V 2.31 & EPS 12V 2.92 standards

80 Plus Certified: 80% efficiency under typical load

Supports (2) PCI-E 6+2pin Connectors. Active (PFC) Power Factor Correction, MTBF: 100, 000 hours

BATTERY FREE PERFORMANCE – You won’t need to worry about dead batteries in your pedalboard ruining your performance when you use an AC-DC 9-Volt power adapter. You can ensure a consistent, battery-free performance when you directly power it

9V POWER SUPPLY FOR GUITAR PEDALS - The D'Addario 9V Power Adaptor works with pedals and other devices requiring 9-Volts to minimize the need to change batteries.

VERSITLE - The Adapter converts AC wall power to 9-Volt DC for powering most instrument pedals and other 9-Volt battery devices. The D'Addario Adapter can also be used to power tip-negative keyboards

Four 9V isolated high-current 400mA output sections (2 with 12V option) power Strymon, Eventide, Line 6 (excludes M9/M13), Boss Twin, TC Electronic Nova, Moog and more

Four 9V isolated 100mA output sections

All outputs compatible with 9V battery operated pedals

Fully modular, so you only connect the cables your system needs.

Triple EPS12V connectors for full compatibility with modern graphics cards and motherboards.

A 140mm rifle bearing fan with a specially calculated fan curve ensures that fan noise is kept to a minimum, even at full load.

Fully modular, so you only connect the cables that your system needs.

A 135mm ML fan utilizes a magnetic levitation bearing and custom engineered rotors for high performance, low noise, and superior reliability.

EPS12V connector for compatibility with modern graphics cards and motherboards.

UL Listed: Specifically Designed 12V Power cord for Yamaha Keyboards

Compatibility: 12V Power supply for Yamaha keyboards YPG-235 PSR-E223 PSR-E243 PSR-E253 PSR-E263 PSR-E313 PSR-E323 PSR-E333 PSR-E343 PSR-E353 PSR-E363 PSR-E403 PSR-E413 PSR-E423 PSR-E443 PSR-E453 PSR-EW300 NP12 NP32 YPT-200 YPT-210 YPT-220 YPT-230 YPT-240 YPT-300 YPT-310 YPT-320 YPT-330 YPT-340 YPT-400 YPT-410 YPT-420 YDD-40 EZ-200 EZ-220 and DD-45 DD75

Certified Safe: Multi-Protect safety system ensures complete protection for you and your devices

FEATURES / POWER SPECS : Only Pwr+ Chargers Have Extra Long 6.5 Ft Power AC/DC cords / Output: 9V 1A / Input: 100-240V / Center Tip Negative (-) / Made in Taiwan / Tested, Approved and Certified by UL.

COMPATIBILITY: Casio AD-5 AD-5MU AD-5MR AD-5EL AD-5MLE AD-5GL Charger WK-110 WK-200 LK-43 LK-100 CTK-496 CTK-573 CTK-720 CTK-2100 Casio 3782, CA-100, CA-110, CPS-101, CT-210, CT-240, CT-310, CT-360, CT-400, CT-410, CT-410V, CT-420, CT-430, CT-450, CT-460, CT-480, CT-488, CT-491, CT-496, CT-500, CT-510, CT-520, CT-550, CT-588, CT-591, CT-599, CT-605, CT-610, CT-611, CT-615, CT-620, CT-630, CT-636, CT-637, CT-638, CT-640, CT-648, CT-650, CT-656, CT-657, CT-660, CT-670, CT-677, CT-688, CT-700, CT-7

CT-770, CT-800, CT-870, CTK-120, CTK-130, CTK-149, CTK-150, CTK-2000, CTK-2100, CTK-230, CTK-300, CTK-3000, CTK-330, CTK-4000, CTK-401, CTK-411, CTK-431, CTK-450, CTK-451, CTK-470, CTK-471, CTK-480, CTK-481, CTK-485, CTK-491, CTK-495, CTK-496, CTK-50, CTK-500, CTK-501, CTK-510, CTK-511, CTK-515, CTK-518, CTK-519, CTK-520, CTK-520L, CTK-540, CTK-550, CTK-551, CTK-555L, CTK-56, CTK-560L, CTK-571, CTK-573, CTK-574, CTK-591, CTK-593, CTK-601, CTK-611, CTK-615, CTK-620L, CTK-630, CTK-631, CTK-647

80 plus Gold certified, with 90% efficiency or higher under typical loads

Single 12V. Rail, DC-DC converter to improve 3. 3V. / 5V. Stability

Active power factor correction

6-outlet surge protector power strip with three-prong plugs

Prevents damage to sensitive devices such as computers, media systems, and more due to sudden power surges and outages

Provides power to up to six electronic devices with 3-line AC protection

80 PLUS Gold certified, with 90% (115VAC) / 92% (220VAC~240VAC) efficiency or higher under typical loads

Fully Modular to reduce clutter and improve airflow

100% Japanese Capacitors plus OVP, UVP, OCP, OPP, SCP, and Dual OTP Protections

80 Plus Platinum: Runs cooler and uses less power than less efficient power supplies

Fully Modular: Allows user to only use the cables they need for a cleaner looking build with better airflow

10-year warranty: Backed by Corsair's legendary technical support and customer service

Input: 100 240V 50/60Hz Output: 12V ; Length: 6 FT , special design for keyboard.

High Quality AC Wall Power Charger for Yamaha Keyboard, Input Voltage : AC 100-240V; Input Frequency : 50-60Hz.

Great for Yamaha Keyboard 12V 2A(or below)Replacement, US Standard Plug.

CERTIFIED GOLD - Supporting 80 Plus Gold efficiency up to 90% and optimized for C6 or C7 States ready

NON MODULAR CONNECTORS – Main Power (24 pin) x 1/ ATX 12V (4plus4 pin) x 1/ SATA (5 pin) x 6/ PCI-E (6plus2 pin) x 2/ peripheral (4 pin) x 3/ FDD x 1

ULTRA QUIET 120MM FAN – Dynamic Bearing fan s superior cooing performance and silent operation

Input:100-240V,50-60Hz;Output:12V Maximum :1.5A(compatible with 1.5A, 1.0A). Total length:9.84feet.

Compatibility With:Yamaha keyboards P71,YPG-235, PSR-F51,PSR-GX76,PSR-E253, PSR-E263, PSR-E273,PSR-E353, PSR-E373,PSR-E363, PSR-EW300, PSR-E453, NP12, NP32, YPT-200, YPT-210, YPT-220, YPT-230, YPT-240, YPT-300, YPT-310, YPT-320, YPT-330, YPT-340, EZ-200, EZ-220, YPT-400, YPT-410, YPT-420, YDD-40,DD-45, DD75,KB190,KB191,KB290,KB291,E453,E463,P35,P45,P48,P105,P115,P121,P125,P128,YDP103,YDP143,KBP1000,KBP2000,DGX660,DGX 650, MM6,YPG-635,YPT-300,PA-3C( Please see full list in the Product Description )

Replacement for Yamaha PA-3 PA-3B PA-3C PA-40 PA-5 PA-5C PA-5D PA-6 PA-1 PA-1B PA-4 PA-130 PA-150 PA-150A EP-A3 KP-A3 PA 130 150 Power Adapter.

9V 1A Power Adapter: Positive-Sleeve, Negative-Center.

Power Adapter: Input: AC 100-240V, 50-60Hz.Output: DC 9V 1A.

DC Plus Dimension: 5.5mm * 2.1mm.

🎸10 ISOLATED OUTPUTS:Donner DP-1 9V Guitar Pedal Power Supply has 10 outputs ,which includes 7 ways 9V 100mA, 1 way 9V 500mA, 1 way 12V 100mA, 1 way 18V 100mA.

🎸NOISE REDUCTION CIRCUIT DESIGN：Donner Guitar Pedal Power Supply Quality is made of aluminum alloy material, which makes it light, and portable. It has a noise reduction function, low noise gives you a better experience, and direct current increases the stability of the power supply during use.

🎸SHORT CIRCUIT PROTECTION:Independent short-circuit protection, when one output is short-circuited, other outputs can still work.

UL Listed: Specifically Designed Power cord for 9.5V Casio Keyboards; NOT for 9V keyboard.

Extended cord: 8.4 feet / Input: 100V-240V AC / Output: DC 9.5V, 1A

Compatibility: Casio keyboards SA-46 SA-47 SA76 SA-77 SA-78 LK-120 LK-125 LK-127 LK-160 LK-165 LK-170 LK-175 LK-190 LK-240 LK-247 LK-260 LK-265 LK-280 CTK-240 CTK-245 CTK-1100 CTK-1150 CTK-1200 CTK-2080 CTK-2300 CTK-2400 CTK-2550 CTK-3200 CTK-3500 CTK-4200 CTK-4400 WK-220 WK-225 WK-240 WK-245 XW-P1 XW-G1 CT-S1 CT-S100 CT-S200 CT-S250 CT-S300 CT-S400 CT-S410 CT-X800

12V power adapter for Yamaha PSR, YPG, YPT, DGX, DD, EZ, PSS, YDP and P digital keyboard series

Input: AC voltage 100V-240V, 60 Hz Output: DC12V 1.0A Cable length 9' 8" (3 Meters)

Can Not Fit 16v 2.4A eg (PSR-500,PSR-S550,PSR-S550B,PSR-S650,PSR-S670 ,PSR-S700,PSR-S710,PSR-S750,PSR-S900,PSR-S910,PSR-S950,PSR-1000,PSR80 YAMAHA PA-300 PA-300B PA-301 etc)

🎸5 WAY DAISY CHAIN：You can run 5 pedals on your pedal board at the same time.Package includes one 9V Power Adapter and 5 way Daisy Chain.

🎸DETAILS:OUTPUT: 9V DC, 1A (1000mA), Tip Negative (-) design;INPUT: AC100V-240V, 60Hz, 6.5W.

🎸PROFESSIONAL NOISE ISOLATION PERFORMANCE:High-quality copper core daisy chain cable with special anti-hum. The professional noise isolation performance ensures you a quiet pedal chain condition while playing.

Compatibility: This 9v power supply for guitar pedals is widely compatible with BOSS , Roland , Distortion, Casio Keyboard, Behringer, DigiTech, Jim Dunlop, MXR, Nobels, NUX, TC Electronic, Xotic, Zoom Effects Pedals, Boss PSA-120S,DS-1 RC-1 RC-3 TU-2 TU-3 SD-1 RV-5 RV-6 DD-3 DD-7 DD-20 ME-50 ME-80 GT-10 HM-2 GT-1B GT-100 GT-1 GT-10 AD-10 BR-80 BR-600 DB-88 DB-90 CE-2B BOSS Mini Katana RE-20 RC-1 RC-3 DS-2 and more.

Save Your Batteries: Working as a replacement for Boss PSA Adapter 9V DC Series, PSA-100 PSA-100S PSA-120 PSA-120S PSA-120S2 PSA-120T PSA-220S PSA-230 PSA-230S PSA-240.

9V Power Supply Specs: Input:100-240V 50-60Hz; Output:9V 1A (0.1A~ 1000mA) DC Plug: 5.5mm x 2.1mm, Center Negative. Cable Cord Long: 5.9 feet.

RGB LED FAN 256 colors Ring RGB 140 millimeter Hydraulic Bearing fan with low noise design. Fan blades are optimized to enhance static pressure for an impressive cooling performance

ONE BUTTON RGB CONTROL : RGB Lighting Button at the back of PSU controls 5 different lighting modes, RGB Cycle, Red, Green, Blue, White, and LED Off

80 PLUS Gold and KABY LAKE READY : Deliver up to 90 percentage efficiency, Tough power RGB Gold Series has been optimized to work with Intel s latest, Seventh generation Kaby Lake processors to achieve maximum energy saving