Best Siglent Technologies Lab Oscilloscopes in 2026

Country of origin : China

Real-time sampling rate up to 1 gsa/use

IRecord length up to 14 Mpts

Package Weight :4.0 Kg

Standard Decoder: Iic, Spi, Uart/Rs232, Can, Lin

16 Digital Channels (Mso) (Four Channel Series Only, Option)

Dual channel * 40 MHz (Sine wave) * Touch screen display

16 bit vertical resolution * Modulation / Sweep / Burst

TrueArb Technology / Easy Pulse Technology

【Scope Mode】: 1. The waveform refresh rate is up to 10000wfms / s; 2. Oscilloscope 2 channel input, bandwidth up to 50MHZ, better signal reception. Real-time sampling rate 250MSa / s, recording length up to 8k dots; 3. Cursor measurement function; 4. 7 kinds of automatic measurement functions; 5. XY function; 6. One key automatic setting function, convenient for detecting and debugging.

【Meter Mode】: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test; 2. Auto range function, convenient for testing and debugging; 3. The maximum input voltage is AC 750V, DC 1000V; 4. Independent multimeter and oscilloscope input; 5. Reading the wait function; 6. Relative measurement function.

【Portable Oscilloscopes】: USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. The computer can read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data.

100mhz, two-channel Digital oscilloscope for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education

Maximum real-time sample rate of 1GS/s and record length of 1Mpts (single channel)

New version of the SDS1102CML+ Includes improved higher resolution display

50mhz, two-channel Digital oscilloscope for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education^Maximum real-time sample rate of 500MS/s (1 channel) and record length of 32Kpts (1 channel) for acquiring detailed waveforms^New, higher resolution display. Advanced triggers for Isolation of specific signals^Cursors, math, built-in frequency counter, automatic measurements^Now Includes USB and LAN interfaces

𝐏𝐫𝐨𝐟𝐞𝐬𝐬𝐢𝐨𝐧𝐚𝐥 𝐃𝐞𝐬𝐢𝐠𝐧𝐞𝐝 : 2 channels, 100 MHz analog bandwidth @ 1 GSa/s Real-time sampling, 240kbit Sample memory depth.

𝐇𝐃 𝐒𝐜𝐫𝐞𝐞𝐧 : 7'' color TFT- LCD touch screen with 800 * 480 resolution.

𝐄𝐚𝐬𝐢𝐥𝐲 𝐌𝐞𝐚𝐬𝐮𝐫𝐢𝐧𝐠 :Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.

𝐏𝐫𝐨𝐟𝐞𝐬𝐬𝐢𝐨𝐧𝐚𝐥 𝐃𝐞𝐬𝐢𝐠𝐧𝐞𝐝 : 2 channels, 100 MHz analog bandwidth @ 1 GSa/s Real-time sampling, 240kbit Sample memory depth.

𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧 𝐒𝐢𝐠𝐧𝐚𝐥 𝐆𝐞𝐧𝐞𝐫𝐚𝐭𝐨𝐫 : Built in DDS Function Signal Generator,14 standard signals (@ 2.5vpp), including sine wave, square wave, triangle wave, ect. [Only the Frequency is adjustable]

𝐎𝐫𝐢𝐠𝐢𝐧𝐚𝐥 𝐂𝐚𝐩𝐭𝐮𝐫𝐞 𝐎𝐮𝐭𝐩𝐮𝐭 : It intercept whole or part of the complex signals from the oscilloscope as the output signal of the signal generator. It can store up to 1000 customized signals.

Professional Designed : Fnirsi oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.

Function Signal Generator : Built-in DDS function signal generator and industry's original chopping output (@2.5VPP), all signal frequency steps are 1HZ, support 14 kinds of standard function signals and a customizable chopping signal, chopping the output divice intercepts part or the whole part of the complex signals measured by the oscilloscope as the output signal of the signal generator, which can store up to 1000 customized chopping signals.

Easily Measuring : Cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.

200 MHz;4 channels; 1 GSa/s; 14 M memory depth; 100,000 wfm/s waveform capture rate; 7 inch display (800*480 pixels); SPO technology,1 Mpts FFT Serial bus triggering and decode (Standard), supports IIC, SPI, UART, RS232, CAN, and LIN Support MSO USB AWG Bode Plot USB WIFI

200 MHz bandwidth / 4 channels

Compatible with several options not available for the 2 channel model (SDS1202X-E) - mixed signal analysis, arbitrary waveform generator software, WiFi control, USB Isolated AWG Module

100 MHz bandwidth

Real-time sampling rate up to 1 GSa/s,Record length up to 14Mpts

Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, CAN, LIN

FNIRSI DSO-TC3 ingeniously integrates digital oscilloscope, electronic component tester, function signal generator and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery. Bring more practical functions to users with a small size, it also has good portability.

DSO-TC3 handheld oscilloscope has a real-time sampling rate of 10MS/s and a 500kHz bandwidth. With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.

DSO-TC3 transistor tester can automatically identify and measure various transistors, including NPN and PNP transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, dual diodes, thyristors, and resistors, inductors, capacitors and other passive components. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code.

100 MHz; 4 channels; 2 GSa/s; 200 Mpts memory depth; 120, 000 wfm/s waveform capture rate; 10.1 inch Touch Screen (1024*600 pixels); SPO technology

100 MHz bandwidth / 4 channels

Real-time sampling rate up to 2 GSa/s

200MHz bandwidth models

1 Mpt FFT

Real-time sampling rate up to 2 GSa/s (1 GSa/s per channel, if both channels active)

NOTE: The oscilloscope will require MSO activation license software (Part number SDS1000X-E-16LA or SDS2000X-E-16LA).

Also, Four-channel SDS1000X-E scopes require firmware version 6.1.20 or greater

Model No: SLA1016

200 MHz; 2 channels; 2 GSa/s; 28 Mpts memory depth; 400, 000 wfm/s waveform capture rate; 7 inch display (800*480 pixels); SPO technology, 1 Mpts FFT, Serial bus triggering and decode (Standard), supports IIC, SPI, UART, RS232, CAN, and LIN

2 channels / 200 MHz bandwidth

Real-time sampling rate up to 2 GSa/s

350 MHz; 2 channels; 2 GSa/s; 28 Mpts memory depth; 400, 000 wfm/s waveform capture rate; 7 inch display (800*480 pixels); SPO technology, 1 Mpts FFT, Serial bus triggering and decode (Standard), supports IIC, SPI, UART, RS232, CAN, and LIN

2 channels / 350 MHz bandwidth

Real-time sampling rate up to 2 GSa/s

200MHz; 4 channels; 2GSa/s; 200Mpts memory depth; 120,000wfm/s waveform capture rate; 10.1 inch Touch Screen (1024*600 pixels); SPO technology

200 MHz bandwidth / 4 channels

Real-time sampling rate up to 2 GSa/s

Large 7-inch TFT-LCD display with 800 * 480 resolution

200Mhz, 4 channels, 1Gsa/use, 1Mpts fft

True measurement and math can use all 14 Mpts of memory