Best Hex Metalworking Multipurpose Drill Bits in 2026

Multipurpose drill bits set with 5 different diameter sizes: 5/32” (length 4.7” ), 3/16” (length 4.7” ), 1/4”(length 6” ), 5/16” (length 6” ), 3/8” (length 6” ). 5 pieces drill bits meet your different needs.

Robust high-quality tungsten carbide head provides longer life in multi-materials including brick, block, tile, fiber cement, wood, plastic and metal

Multi-grind sharp edges deliver high drilling speed even in hard materials, perform 85% faster in multi material than standard bits

Full size set kits includes from 3/64-inch to 1/2-inch in tough plastic case

Titanium coating reduces heat buildup for longer life, lasts X 6 more than conventional bits

Multipurpose use ideal for drilling in metal, wood, fiber glass and plastics, not for use on concrete or masonry

CML Supply 30pc. high speed steel drill bit set

Includes sizes from 0.013" to 0.079"

Pin Vise with swivel top holds bits from 0-.125"

Upgraded multi-grind heads – deliver up to 85% faster drilling in metal than standard bits

Hex shanks and impact rated – allows use in impact drivers and hammer drill/drivers for added versatility

Sharp ground cutting edges – designed for advanced performance

Wide Range of Sizes: Including 7 Pieces of Plain Center Drill Bits Set range in size 1.0 1.5 2.0 2.5 3.0 4.0 5.0 to meet different needs

Accurate: A 60-Degree Angle center drill is very useful in drilling accurate center holes, 60-degree countersink holes or starter holes for bigger drill bits in metal-working

High Quality: Our center drill bits made of high quality M2 High speed steel, solid and high temperature wear resistant

[M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.

[Non-stop]: Our Polished Steps and Size Highlights make it possible for you to see target hole size during drilling. No need to stop in the middle of the drilling to check. Save you time and hassle.

[Easy & Fast]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Comes with Quick change 1/4 inch hex shank for quick bit switches and compatible with impact ready power tools.

Sharp & Wear-Resistant: These drill bits are made of 4241 high speed steel with titanium coating for proven capability and durability.

Multi-Purpose: Great tools for drilling holes in soft metal, wood, plastic, fiberglass, etc.

Twist Design: Precise 135o Split Point drill bit ensures clean & accurate hole drilling.

【Multi-Purpose Use】For use on various materials e.g. brick plates (max. thickness 5cm), wood boards (max. thickness 5cm), metal plates (max. thickness 3mm), soft tile, and plastic

【High Quality】Alloy steel, superior heat treatment and hardened drill bits. Special U-type groove slot design for smooth dust removal and fast drilling

【Industrial Grade】Durable Tungsten Carbide drill tip precision ground at special angle with copper welding for strong drilling performance and longer lifetime

Size: Bit Diameter: 6.8mm; Flute Length: 58mm / 2.3"; Total Length: 108mm / 4.3"; Shank Diameter: 6.8mm

Feature: After using full grinding process, it has stronger cutting ability and longer service life.

Material: Cobalt-containing high-speed steel drill bit, high wear resistance and toughness, not easy to break, sharp cutting edge, effectively improving drilling speed.

Product Name : Step Drill Bit;Material : Metal

Color : GoldTone;Shank Size : 10 x 24mm/ 0.4" x 1"( D*T )

Step Quantity : 7;Cutting Dia : 6-18mm/ 0.24"-0.7"

Product Name : Step Drill Bit;Material : Metal

Color : Silver Tone;Shank Size : 10 x 24mm/ 0.4" x 1"( D*T )

Step Quantity : 7;Cutting Dia : 6-18mm/ 0.24"-0.7"

Spotting Drill is made of tungsten steel material with 55HRC high hardness and durability.

With titanium silicon coating for steel processing and it is available in two styles for choiceis.

High accuracy, suitable for fine turning of milling machine.

These center drill bits are used in metalworking to provide a starting hole for a larger-sized drill bit

METAL PROCESSING: These center drills are used for metal processing to provide starting holes for larger size drills.

HSS DURABLE: Made from high speed steel, these center drill bits are of high hardness and good wear resistance.

WIDE APPLICATION: Can be applicable to iron, steel, copper, aluminum and other processing.

FEATURE: Each bit has a double end and grinding at a standard 60 degree Angle.

Sharp and durable, accurate positioning, cutting edge clear

Product Name : Masonry Drill Bit;Feature : Hex Shank;Material : Carbide Steel

Tip Width : 12mm / 0.47";Shank Hex Width : 13mm / 0.51"

Flute Length : 60mm / 2.4'';Total Length : 200mm / 7.9"

Product Name : Spot Drill;Point Angle : 90 Degree;Design : Straight Shank

Material : HSS;Bit Dia : 5mm/1/5"

Shank Diameter : 5mm/0.2"(1/5");Flute Length : 23mm/ 1

Product Name : AugerDrill Bit;Material : Metal

Cutting Dia(Approx) : 8mm / 0.3";Twist Length(Approx) : 14cm / 5.5"

Hex Shaft Size(Approx) : 8mm / 0.3";Total Length(Approx) : 20cm / 7.9"

Wide Range of Sizes: Including 7 Pieces of Plain Center Drill Bits Set range in size 1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 4.0mm 5.0mm to meet different needs

Accurate: A 60-Degree Angle center drill is very useful in drilling accurate center holes, 60-degree countersink holes or starter holes for bigger drill bits in metal-working.

High Quality: Our center drill bits made of high quality M2 High speed steel, solid and high temperature wear resistant.

99pcs Drill Bits Include: 11pcs of each size( 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/35", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 3/64", 3/8", 25/64", 13/32", 27/64", 19/32", 29/64", 15/64", 31/64", 1/2") drilling dia M35 straight round shank twist drills, can accommodate a wide range of drilling needs.

M35 Twist Drill Bit: Made from M35 cobalt material which has the characteristic of high hardness and durability. The cobalt material gives the bit superior wear resistance and overall toughness, making it great for long-term use in a variety of drilling applications.

Quick and Clean Drilling: The external point angle design of this cobalt twist drill bit allows for fast and efficient drilling, with effective chip removal to prevent clogging, perfect for a range of materials including metal, wood, and plastic.

13pcs Drill Bits Include: 1pcs of each size( 1/17", 7/89", 6/61", 11/93", 12/95", 4/29", 14/89", 14/79", 17/90", 13/66", 21/97", 17/72") drilling dia M35 straight hex shank twist drills, can accommodate a wide range of drilling needs.

M35 Twist Drill Bit: Made from M35 cobalt material which has the characteristic of high hardness and durability. The cobalt material gives the bit superior wear resistance and overall toughness, making it great for long-term use in a variety of drilling applications.

Quick and Clean Drilling: The external point angle design of this cobalt twist drill bit allows for fast and efficient drilling, with effective chip removal to prevent clogging, perfect for a range of materials including metal, wood, and plastic.

Compatible with 1-1/8" (30mm) jack hammers, fits most demolition hammers.

Great for digging large holes in the garden. Also ideal for bathroom or kitchen projects, used to remove tiles, stones and other masonry.

The long handle design adapts to all angles of work and feels more relaxed.

Features: The product undergoes overall quenching treatment, with higher hardness. Convert MT2 to MT1 quickly and easily with this durable drill sleeve.

Quality: Each product leaves the factory through strict testing and rejects defective products. Ideal for small drilling operations that require accuracy.

Easy to Processing: After each product is processed, has been refined for many times, and the optimal finish ensures that the accuracy of the processing is easier.

Using high quality materials and fine grinding process makes the cutting edge more .

Using high quality materials and fine grinding process makes the cutting edge more .

ADVANTAGE:Reduce cutting force and broken drill to improve the quality of hole wall.

Product Name : Masonry Drill Bit;Shank Type : Square Shank;Tip Width : 12mm / 0.47"

Shank Size : 9.5mm / 0.37";Flute Length : 290mm / 11.42"

Total Length : 350mm / 13.78";Material : Metal

Product Name : Drill Bit Stop Collar;Material : Metal

Color : Black;Internal Diameter : 3mm,4mm , 5mm , 6mm , 8mm , 10mm , 12mm , 14mm ,16mm

Thickness : 8mm / 0.3"

Product Name : Auger Drill Bit;Material : Metal

Cutting Dia(Approx) : 6mm / 0.2";Twist Length(Approx) : 14cm / 5.5"

Hex Shaft Size(Approx) : 6mm / 0.2";Total Length(Approx) : 20cm / 7.9"