Best Homekit Neutral Safety Switches in 2026

Hassle-free and Secure Installation: Easily install Treatlife light switches with clear, step-by-step instructions. Comes with standard size and screwless snap-on wall plates. Requires a neutral wire, but no hub is needed. Only works with 2.4GHz WiFi. Max Power: 1250W. Output Current: 10A. FCC certified for safety.

Voice-Activated Lighting: Experience the ultimate convenience of controlling your home lights with just your voice. Our wifi switches for lights seamlessly integrate with Amazon Alexa, Google Assistant, and SmartThings, perfect for when your hands are full or entering a dark room.

Illumination at Your Fingertips: Take full control of your lights from anywhere using the Smart Life app on your smartphone. Whether you're cozy in bed, busy at the office, or enjoying a well-deserved vacation, easily turn your lights on/off, create personalized schedules, monitor real-time light status, share device access, and effortlessly manage groups of lights with a simple tap.

【Advanced Motion Detection】Completely hands-free and smart operation of your connected lights. You can set this switch to automatically turn on the light when motion is detected and turn off after a preset time. Ideal for areas such as bedrooms, hallways and restrooms where hands-free operation is ideal.

【Daylight Detection】Smart ambient light detection will sense daylight and prevent lights from turning on during the day.

【Dimming and Smart Mode】Set different light triggers and brightness levels based on your routine for effortless control. Adjust the brightness of your lights from 1% - 100%.

【Advanced Motion Detection】Completely hands-free and smart operation of your connected lights. You can set this switch to automatically turn on the light when motion is detected and turn off after a preset time. Ideal for areas such as bedrooms, hallways and restrooms where hands-free operation is ideal.

【Daylight Detection】Smart ambient light detection will sense daylight and prevent lights from turning on during the day.

【Dimming and Smart Mode】Set different light triggers and brightness levels based on your routine for effortless control. Adjust the brightness of your lights from 1% - 100%.

Hassle-free and Secure Installation: Easily install Treatlife light switches with clear, step-by-step instructions. Comes with standard size and screwless snap-on wall plates. Requires a neutral wire, but no hub is needed. Only works with 2.4GHz WiFi. Max Power: 1250W. Output Current: 10A. FCC certified for safety.

Voice-Activated Lighting: Experience the ultimate convenience of controlling your home lights with just your voice. Our wifi switches for lights seamlessly integrate with Amazon Alexa, Google Assistant, and SmartThings, perfect for when your hands are full or entering a dark room.

Illumination at Your Fingertips: Take full control of your lights from anywhere using the Smart Life app on your smartphone. Whether you're cozy in bed, busy at the office, or enjoying a well-deserved vacation, easily turn your lights on/off, create personalized schedules, monitor real-time light status, share device access, and effortlessly manage groups of lights with a simple tap.

【Advanced Motion Detection】Completely hands-free and smart operation of your connected lights. The switch automatically turns lights on when motion is detected and turns off after a preset time. Ideal for areas such as bedrooms, hallways and restrooms where hands-free operation is ideal.

【Daylight Detection】Smart ambient light detection will sense daylight and prevent lights from turning on during the day.

【Smart Mode & Away Mode】Set different light triggers based on your routine for effortless control. Automatically turns devices on and off at different times to give the appearance that someone is home.

【Advanced Motion Detection】Completely hands-free and smart operation of your connected lights. The switch automatically turns lights on when motion is detected and turns off after a preset time. Ideal for areas such as bedrooms, hallways and restrooms where hands-free operation is ideal.

【Daylight Detection】Smart ambient light detection will sense daylight and prevent lights from turning on during the day.

【Smart Mode & Away Mode】Set different light triggers based on your routine for effortless control. Automatically turns devices on and off at different times to give the appearance that someone is home.

NEUTRAL WIRE REQUIRED FOR INSTALLATION: Please note that if your house is not equipped with a neutral wire, the Meross dimmer switch will not work. Please make sure your electrical box has a neutral wire (white color) before purchasing. If you are not sure, please send us a photo of the inner part of your electrical box. We can check it for you timely.

EASY INSTALLATION FOR MEROSS DIMMER LIGHT SWITCH: Less than 15 min installation. Works in a single pole setup only (Not 3 Way). Dimmer Switch fits for your existing 1/2/3/4 gang standard size Decora/GFCI wallplate.  The smart switch works with the 2.4G WiFi only, does NOT support 5G WiFi, and no hub is required.

DIM YOUR LIGHT FROM 0% - 100%: Dim the light for the scenes you need. You can dim it via the Meross app, Amazon Alexa or Google Assistant voice commands, or the wall switch hardware buttons. Of course, you can also easily schedule it to turn on/off or dim the light automatically. When you turn on the LED dimmer switch, it will turn back to the same brightness it was before you turned it off. Sunrise and sunset settings are supported.

Easy To Install: The installation was fairly easy to follow based on the clear instructions provided. Just replace one of the two 3 way dimmer switches and leave your other existing 3-way switch in place. Make sure to install Treatlife switch on the line side (the source of power) and the 3-way switch on the other end needs to be a standard/dumb 3-way. Neutral wire required (a bundle of white wires), no hub required, works with 2. 4G WiFi only ( NOT 5G).

2 Master 3-Way Smart Dimmer Switches: Comes with two main switches that could be used independently, you can install one to replace a current three way setup in a hallway and use the other one in a bedroom. Control the dimming of 1 Light from 1or 2 Places, can be used as a 3-way or single-pole switch. The smart dimmer switch is only for dimmable bulbs.

1%-100% Touch Dimming & Voice Control: Slide a finger up or down to adjust the light brightness without clicking noise. Alexa and Google Home voice assistants make it easy to control and dim all the lights with voice commands. This smart light switch can memorize the last brightness setting to help you get the most comfortable light after powering on. Compatible with SmartThings but not Apple Homekit.

VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Vera and more.

OUTLET OPTIONS – Use one grounded Z-Wave controlled outlet to wirelessly schedule and operate a lamp or small appliance from anywhere at any time with a mobile device. The always-on outlet provides continuous power for traditional use.

TAMPER RESISTANT – For increased safety, tamper-resistant outlets prevent foreign objects from being inserted any slot individually. The smart device is ideal for homes with pets or small children and protects against common injuries associated with electrical receptacles.

【NON-HOMEKIT & NEUTRAL WIRE REQUIRED】: Please make sure your electric box has a neutral wire(in white color) before purchasing a smart dimmer switch. If you are not sure, please take a photo of the inner part of your electric box and send it to us. We can check it for you timely.

【EASY INSTALLATION FOR MEROSS DIMMER LIGHT SWITCH】: Less than 15 min installation. Works in a single pole setup only (Not 3 way). Dimmer Switch fits for your existing 1/2/3/4 gang standard size Decora/GFCI wallplate.  The smart switch works with the 2.4G WiFi only, does NOT support 5G WiFi, and no hub is required.

【DIM YOUR LIGHT FROM 0% - 100%】: Dim the light for the scenes you need. You can dim it via the Meross app, Amazon Alexa or Google Assistant voice commands, or the wall switch hardware buttons. Of course, you can also easily schedule it to turn on/off or dim the light automatically. When you turn on the LED dimmer switch, it will turn back to the same brightness it was before you turned it off. Sunrise and sunset settings are supported.

MULTI-FUNCTIONAL DIMMER: Smooth brightness control for incandescent and LED bulbs (up to 75 Watts of LEDs). Smart bulb ready! Double tap to full brightness, adjustable ramp rate, and dimming speed (your hub needs to support advanced setting input). NO DIRECT 3-WAY, only virtual 3-way available. Contact support for details.

POWERFUL RELAY: Connect any load up to 15A, including ceiling and exhaust fans for reliable on/off control from the relay button and via Z-Wave. Or use the button for scene control (multi-tap supported by select hubs only, contact support before buying).

EASY INSTALLATION: Pigtail wires for convenient connections. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.

Easy to Install: Neutral wire(in white color) is required. Need 2.4GHz Wi-Fi connection. Fits for your exsiting 1/2/3/4 gang standard size Decora/GFCI wallplate.

Single Pole to 3-Way: Turn your single pole dimmer switch to 3 way dimmer switch by mounting the Wireless Remote device and wallplate. Easily add an additional point of control without pulling wires. You can also use it as a table‐top control or handheld control.

0%-100% Dimming and Multiple Control Methods: Turn switch on/off or adjust to your desired brightness from anywhere with your smartphone using meross app when internet is accessed. Compatible with Amazon Alexa, Hey Google and SmartThings (Meross app is required). Enjoy the hands-free convenience of controlling the switch in your home with your voice. About the remote control, one dimmer switch can be paired with up to four remotes.

SMART RELAY FOR ON/OFF CONTROL: Install this relay to add Z-Wave to the existing wall switch and keep your favorite switch style and color. The relay output is dry contact for your unique applications outside of lighting but note the input (switch) requires 120 V which makes it perfect for 120 V signal monitoring on sump pumps or motion lights. For a dry contact input device, look up ZEN16.

3-WAY COMPATIBLE: Unlike many other smart relays, you can use this device to automate 3-way set-ups as well. Even if you don't have neutral available at any of the switch boxes, you can always install this relay at the light fixture where you'll have access to power and neutral. Always follow the wiring diagrams carefully and make any programming changes if needed when installing this relay.

EASY INSTALLATION: Pigtail wires for convenient connections. Connect to mechanical on/off or momentary switches only (NO dimmers or electronic / smart switches). The relay is small enough to fit in the most crowded box, just 1.5" x 1.4" and 0.7" deep. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.

WIFI SMART DIMMER SWITCH: 2.4 GHz WiFi enabled (no hub required) dimmer switch offers secure, smart lighting control of your home by voice or Starfish mobile app compatible with Siri, Alexa, Google Assistant, and SmartThings

WALL PLATE: Single gang wall plate included

STANDARD SIZE: Standard size with white finish measures 4.63 x 2.76 x 1.72 inches