Best Black Pipe Fittings in 2026

Upgrading your toilet supply line is simple with this durable Click Seal toilet connector

Easy to install, no tools required just twist, “click” and seal

Click Seal minimizes cross threading and stripping

Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8x24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter

Material: SUS304 Stainless Steel

Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application

Easy access to first check simplifies debris removal

Repair kit allows for a quick fix, instead of a full replacement

Entire unit serviceable in line

Fits 1" Size PVC Pipe, which has an outside diameter of 1-5/16" (1.315")

Superior, glossy purple surface finish with tapered sockets for a Professional appearance

Injection molded as a single piece from durable and UV-resistant Furniture Grade PVC

Everflow product code BMCR0114

Cross fitting for 150 lbs applications

With four equally sized female threaded connect with 1-1/4 inch size

Size&Types: Size 3/4" Cross 4 Way

Material & Standard: PVC, SCH 40

Protection: UV Resistant

【Features】: Cross for connecting and branching four pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Commonly used to connect pipes for air, water, fuel, oil and inert gases.

【Firm and durable】: Female NPT threads for connecting to male threaded pipes. Barstock cross is a brass pipe fitting with 1/4" female NPT threads. The cross fitting has four openings positioned at 90-degrees from each other for connecting and branching four pipes.

【Great function】: Deeper and tighter threads allow better bite, enhancing fixation, not easy to slip. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads

【Features】: Cross for connecting and branching four pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Commonly used to connect pipes for air, water, fuel, oil and inert gases

【Firm and durable】: Female NPT threads for connecting to male threaded pipes. Barstock cross is a brass pipe fitting with 1/4" female NPT threads. The cross fitting has four openings positioned at 90-degrees from each other for connecting and branching four pipes

【Great function】: Deeper and tighter threads allow better bite, enhancing fixation, not easy to slip. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads

White fittings that are used in potable water applications only

Intended for pressure use

For use where systems will not exceed 140° F

SIZE: Will fit 1" Size PVC pipe, which has an outside diameter of 1-5/16" and an inside diameter of approximately 1".

PROFESSIONAL GRADE: SCH40 PVC, UV resistant, tapered edge sockets, glossy white finish.

FURNITURE GRADE: Great for outdoor shelf, furniture or greenhouse. Single piece injection molded.

【PREMIUM MATERIAL】- PEX AL PEX Tubing Pipe inner and outer layers of aluminum-plastic pipe are cross-linked polyethylene materials, with a thick aluminum layer in the middle, laser fusion, three-layer protection, environmental protection, non-toxic, durable

【HOT & COLD WATER PIPING】- PEX-Al-PEX tubing has a small thermal expansion coefficient (expansion coefficient: 0.025 mm / m·°C), high- pressure resistance, corrosion resistance, and excellent performance. 1/2' PEX AL PEX tubing can be used for the transportation of cold and hot water fluids (Working Temperature: 10 ℃ ~ 95 ℃)

【FREELY BENDABLE】- Radiant floor tubing PEX AL PEX middle aluminum material increases the toughness of the pipe, which can be bent freely without rebound, easy to cut, process, and easy to install and construct

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability.

Type: Cross 1/2” Female thread.

Operating temperature: range from -65 to 250 degrees F.

Pipe OD:38mm （1.5"）

Ferrule Size: 50.5mm Ferrule OD fits 1.5" tri clamp

With FOUR openings for connecting and branching three pipes or tubes

WHAT YOU GET - 22 pieces different type fittings, including 3 Elbows, 3 Union Tee, 3 Y Splitters 3 Straight Unions, 3 Reducer Unions, 3 Cross Unions, 2 Hand Valves, 2 Manifold

MATERIAL - Safe and reliable material. Energy-saving, pollution-free, low-cost. High pressure resistant and Non Tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.

DURABLE - The body is Plastic/PE, stainless steel locking claw, NBR O-ring. Each fitting works well and they feel very solid and durable. Once applied, no worries or danger of tubing coming loose. High pressure resistance, can withstand strong pressure without tripping, so no tripping needed, can works for a long time.

1.【Package Including】10 Pack 3Way 3/4 in Tee PVC Fitting Elbow.

2.【Rust-resistant and Durable】-The 3/4 pvc fittings is made of great PVC material with high stander which is anti-rust and can be longtime lasting.

3.【Size】：The PVC pipe fittings diameter is 3/4 inch, the thickness of PVC Tee is 3mm.3-Way Tee is cross 45 and 90 degree elbow.

Shape: Cross, Threads: 3/8" NPT Female - Machined (Provides seal tight threads)

Temperature Range: -65 ° F to 250 ° F

Max Working Pressure: 250 PSI

These double-offset tub supplies come with cross handle valves and heavy cast bell flanges.

Covered under Signature Hardware's 10 year limited

Solid brass construction

Material: POM; Color: White; Fit Tube OD: 1/4"; Female Thread Size: 1/2NPT; Total Size: 37mm x 25mm / 1.46inch x 0.98inch(L*D)

Advantage: The fitting shell is made of POM material, good toughness, rust resistance, durable to use. Push to connect design, good sealing performance, stable and not loose.

Instruction: With the quick-connect design, tubes can be rotated 360 degrees for quick installation and easy disassembly without tools.

Pipe OD:38mm （1.5"）

Ferrule Size: 50.5mm Ferrule OD fits 1.5" tri clamp

Clamp End True Y Type Type with three openings for connecting and branching three pipes or tubes

6-type: Including cross, elbow, tee, straight, manifold, hand valves, meet your different needs.

Feature: Room-saving and flexible, the connect fittings are easy to install; 360-degree rotation is available.

Applications: Applied in automatic production equipment, such as packaging, electronics or machinery.