Best Long Nose Pliers in 2026

Lineman's Pliers with hinge opening holds and cleans 5/8-Inch (16 mm) pole line and hardware bolts or threaded rods

Cuts ACSR, screws, nails, and most hardened wire

High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs

Product 1: Pliers wrench 3-Piece set (7, 10, and 12-inch)

Product 1: Contains Part #'s: 86 03 180, 86 03 250 and 86 03 300

Product 1: Replaces a full set of inch and metric open end wrenches

For gripping, adjustment and assembly work in hard to reach areas thanks to slim, very long design

Deep down situated parts can be easily reached using the slim, half-round tips

Careful yet reliable gripping, holding and guiding of small copper pipes, screws and cables as well as other round parts thanks to milled grooves with smooth surfaces

Durable nickel chromium steel construction

ProTouch grips provide extra comfort and reduces hand fatigue

Product 1: Extra Wide opening to 1-1/2"

Product 1: Longer jaws grip better, Thinner jaws give greater access in tight spaces.

Product 1: 4 thread knurl and non-protruding jaws provide greater capacity; minimal head width improved performance in confined spaces

COMFORT AND CONTROL: Multi-zone bi-material grips

INDUCTION HARDENED: Cutting edges stay sharper longer

STRENGTH AND DURABILITY: Drop forged steel

COMBINATION Long Nose Pliers design is sleek, lightweight and includes an additional pipe grip feature

XTREME LEVERAGE TECHNOLOGY (XLT) increases performance and reduces hand fatigue

LASER heat-treated cutting edges perform better and last longer

Crescent's 5 piece plier set includes 5, 7, and 10 inch curved jaw locking pliers, plus 6 and 9 inch long nose locking pliers

Versatile curved jaw also features integral wire cutter

Plastisol dip on release lever for improved comfort

Extra long and slender, tapered nose with a fine tip

Smooth, non-serrated jaw faces won't mar soft metals or finished parts

Recessed coil spring gently assists opening to minimize hand fatigue

Long Nose Plastic Pliers-1000V Insulated

Long Nose Plastic Pliers-1000V Insulated

Long Nose Plastic Pliers-1000V Insulated

Features durable nickel chromium steel construction.

The ProTouch grips provide extra comfort and reduce hand fatigue.

Machined jaws provide maximum gripping strength. Induction hardened cutting edge stays sharp longer.

Insulated Comfort Grip Two-Color Dual Component Handles are 1000 Volt VDE-Tested

Half-Round, Long Jaws with Serrated Gripping Surfaces

Cutting Edges Induction Hardened Approximately 61 HRC will Cut Medium and Hard Wire Maximum Diameter 3.2mm and Hard Wire Maximum Diameter 2.2mm

Compact, long nose pliers - ideal for precision PCB work, lab/science work, crafts etc.

Serrated jaws to firmly grip objects

Wire cutting jaws (cutting capacity: 2mm copper wire)

Long Nose Pliers w/ Cut

Long Nose Pliers w/ Cut

Long Nose Pliers w/ Cut

Long pointed-nose pliers with 1.2mm width for general purpose electronics applications

32mm serrated jaw with precision-ground surfaces provides smooth operation

Flat outside edge eases access to recessed or component-dense areas

Remove stripped/rusted/corroded/stuck/one-side/security/Torx screws, nuts and bolts.

Includes 1x: 5” Mini (ESD Safe), 6.25”, 7” Slip Joint, 7.5” Long Nose, 8” PRO Lineman’s Screw Extraction VamPLIERS + Vampire Tools Handy Tool Organizer Pouch

Designed with VamPLIERS Technology. Horizontal & vertical teeth in the concave jaw grips and extracts stripped screws, nuts or bolts using the top jaw or the side jaw

Application: Compact Precision Needle Nose Pliers for high detail, delicate, intricate, no marring, precision use. Excellent for work in narrow spaces, electronics, circuit boards, and other small components.

Unlike other precision pliers, our half-round, non-serrated smooth jaws have a tight and close fit to the very tip of the jaw for picking up and holding small object with damage.

Made in Japan from Japanese S58C Carbon Steel (HRC58±4). These pliers are small but strong and wont bend with pressure. ROHS compliant.

high quality compact, fine needle nose pliers with half round, non-serrated jaws

ideal for forming, precision PCB/electronics work, lab/science work, crafts etc.

ESD safe comfort grips, constructed from oil resistant thermoplastic elastomer

Five tools in one, combines crimper for UR/UY/UG, AMP tel splice connectors

709 series connectors, crimping "B" type connectors and a long nose pliers

With a crusher, cutter, 0.030" stripping hole and yellow plastic handle

LONG NOSE PLIERS: These pliers have a 2-inch reach. Additionally, there are notched teeth that allow you to keep a solid grip on fasteners or other objects when on the job

REAMING HEAD: No need for any extra reaming tool. These pliers have a head that can ream out pipes up to 1.5 inches in diameter

COMFORT GRIP HANDLE: The rubberized handle has notches onboard for easier gripping, even in slippery environments

Remove stripped/rusted/corroded/stuck/one-side/security/Torx screws, nuts and bolts.

Designed with VamPLIERS Technology. Horizontal & vertical teeth in the concave jaw grips and extracts stripped screws using the top jaw or the side jaw

Includes 1x: 5" Mini ESD Safe VamPLIER, 6.25", 7.5" Long Nose, 8" PRO Lineman's screw extracting VamPLIER & Vampire Tools Handy Tool Organizer Pouch

Includes 1-pc. long nose pliers: 8 in.; 1-pc. diagonal cutting pliers: 7 in.; 1-pc. linemans pliers: 9-1/2 in.; 2-pc. slip joint pliers: 6-1/2, 8 in.; 1-pc. groove joint pliers: 10 in.

Diagonal cutting pliers with induction-hardened blades cleanly snip copper, aluminum, and soft steel wire in solid, stranded, and braided forms

Strong, stout long nose pliers with crosscut teeth have thick jaws that taper to a fine tip just at the nose to prevent twisting

Long Nose 70 Angled Pliers w/ out Cut

Long Nose 70 Angled Pliers w/ out Cut

Long Nose 70 Angled Pliers w/ out Cut

VamPLIERS, made in Japan from high quality carbon Kobe Steel 7.5" Long Nose Specialty Screw Extraction Pliers, removes stripped/rusted/corroded/stuck/one-side/security/Torx screws, nuts and bolts

Designed with VamPLIERS Technology. Horizontal & vertical serrated teeth at the tip of the jaws, grips and extracts stripped screws/fasteners with ease using the top jaw or the side jaw.

Professional grade pliers with inter-meshed teeth provide non-slip grip

[Mechanic Pliers Tools]: Work around obstructions, grip small parts, and bend wires, using the ABN 11 Inch Long Needle Nose Pliers; Each package includes a straight duckbill nose pliers

[Reach and Grip Effortlessly]: Long reach pliers allow you to access limited clearance areas while keeping your hands safe from sharp and hot surfaces; Bend, shape, and twist wire, hold and pull tiny fasteners, and work with objects that are just too small for your fingers

[For Crafting and Repair Work]: When servicing your computer or vehicle, your fingers can be too thick to work with the small parts; Small needle nose pliers help you hold and manipulate these small parts and can also be used to string guitars, wire a fishing pole, and craft jewelry and artwork

Jewelry Making Supplies: Package comes with set of 3 jewelry pliers including needle nose pliers, round nose pliers and wire cutters. Professional jewelry tools for jewelry making, jewelry repair, wire wrapping, beading and other DIY crafts

Premium Jewelry Making Tools: These jewelry making pliers are made of high-quality steel that are sturdy and rust proof for long time use. The jewelry plier with smooth polished surface and non-slip handles that are designed for jewelry making and repair. no worry about scratch or leave marks on your jewelry

Chain Nose Pliers for Jewelry Making: The chain nose pliers also called needle nose pliers or snipe nose pliers, are a great universal versatile plier that has long, tapering jaws without teeth that is smooth and pointed. They can reach into tight places that are inaccessible to other types of pliers. The needle nose pliers are perfect for gripping, bending, crimping, opening and closing jump rings, holding small items and shaping wire

4 PC 11" Long Nose Plier Set

Set Includes: Straight, 45 Degree, 90 Degree & "S"

High Carbon Steel Drop Forged Harden Teeth

Needle-Nose Pliers Set: Access Tight Places With Extra Visibility! These Needle Nose Pliers Feature A Unique Bent Head Design That Allows You Access Tight Spaces At An Angle That Won'T Block Your Sight Line.

Durable Construction: This Set Includes A 6" Short Needle Nose & 8" Long Needle Nose Pliers. They Feature Spring-Loaded Thin Heads & Rubberized Grips With Built In Hand Notches For Ergonomic Comfort.

Quality Hand Tools: We'Ve Got All Of Your Tool Needs Covered With Our Wide Array Of Scrapers, Pliers, Magnets, Wrenches, Hex Bit Sets, Pin Removers & Even Drive Head Replacement Kits For Ratchets!

🤠【Premium Material】The Pliers body is made of high-quality CR-V steel, with overall heat treatment, higher hardness and long lifetime

🤠【Production Technology】Twice heat treatment of the cutting edge, harder, cutting edge CNC processing, thinner, labor saving 30%, more convenient to use

🤠【Comfortable Handle】TPR handle, non-slip and wear-resistant. The widened handle design makes the grip more comfortable. Can be easily opened with one hand, easy to use

Drop forged and heat treated steel for durability and corrosion-resistance.

Straight jaws are for universal use while curved jaws prove more efficient in tightening, clamping and turning round objects. Both jaws are equipped with strengthened teeth for stronger grip.

The additional adjustable screw attached to the handle provides the ideal clamping pressure, making your work more easily.