Best Lightweight Power Impact Drivers in 2026

Compact (5.55 front to back), lightweight (2.8 lbs) design fits into tight areas

3 LEDs with 20-second delay after trigger release, provide visibility without shadows

One-handed loading 1/4 hex chuck accepts 1 bit tips

Premium power 18V combo kit – includes two tools (impact driver and hammer drill) for power, with two CORE18V 4. 0 Ah batteries

Half driver, half wrench freak – features a 1/4 in. Quick-change hex shank and a 1/2 in. Square drive, for either bits or sockets

CORE18V battery – provides next-gen Li-Ion 21700 cell technology in a lightweight, high-power battery with all-day performance

Brushless motor of the the cordless impact driver provides 50% more runtime

Powerful motor provides 1,400 in-lbs of torque for large fastening applications

Transmission provides 2,700 MAX RPM's for speed of fastening applications

Quick shift mode uses the Brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening

BL Brushless motor delivers 3, 600 max RPM and 1, 600 inches pounds of max torque

4 speed power selection (0 1, 100/ 0 2, 100/ 0 3, 200/ 0 3, 600 RPM & 0 1, 100/ 0 2, 600/ 0 3, 600/ 0 3, 800 IPM) provides precise fastening control for a wide range of applications

3 SPEED SETTINGS: For those instances where you want to work with lower power, you can adjust the speed accordingly with the convenient top-mounted speed switch

GRIPZONE OVERMOLD: The pistol grip on the P238 has a rubber molding that increases friction between the tool and your hand, giving you maximum control, even in slippery environments

TRI-BEAM LED: The lighting unit below the keyless chuck prevents shadows from being cast on your work subject, letting you focus your attention to the task at hand without distraction

COMPACT AND LIGHTWEIGHT – Helps prevent muscle fatigue.

QUICK-RELEASE CHUCK – 1/4 in. hex chuck designed for fast and easy bit changes.

HIGH-PERFORMANCE TRANSMISSION – Powers up to 1,375 in-lb of maximum torque, 3,000 rpm, and 3,900 ipm.

ONE+ COMPATIBLE: Keep this tool charged with any of the lithium ion batteries from the Ryobi One+ family. You can even use older NiCad batteries. (Compatible batteries include: P100, P101, P102, P103, P104, P105, P107, P108)

CHANGE BITS WITH ONE HAND: Quick connect cuff attached to the quarter inch chuck lets you insert bits and remove them with the same hand. Simply pull back on the cuff to eject your bits

ONBOARD ORGANIZATION: Magnetic tray can hold screws and bits for maximum user convenience

3 SPEED GEARBOX: Vary between 0 and 3200 Impacts Per Minute, letting you work on both delicate and difficult jobs at the flick of a switch

TOOL-LESS BIT CHANGE: With this special chuck, you need only to insert your bits into the slot. Eject the bits by pulling back on the collar. No tools necessary

RUBBER OVERGRIP: Special notched rubber covers the handle, giving you a stronger grip on the tool even in slippery conditions

HIGH PERFORMANCE: The cordless impact driver delivers 1,460 in-lbs. of torque and max 2,800 RPMs/3,100 IPMs for quick fastening applications

QUICK AND EASY: Quickly release chuck for easy one-handed bit changes

IMPROVED VISIBILITY: LED light helps in dark work areas

SET INCLUDES: This set includes one 1/2-inch impact driver, one 1/2-inch drive bit chuck, two Flat Bits (5/16- and 3/8-inch.), two Phillips bits (#2 and #3), and one storage case. The impact driver has corrosion-resistant Chrome plated finish with non-slip knurled grip, and the bits have precision-milled tips for exact fit."

HOW IT WORKS: When you strike the top of the tool with a hammer, the drive tang is turned 20 degrees in the direction you have set the tool. You can use this driver with impact sockets and on nuts, bolts, and other fasteners. If you need additional or replacement bits, try picking up an ARES 70013 Impact Bit Set."

COMMON APPLICATIONS: Instant impact force loosens rusted or frozen screws without damaging them, so you can save yourself the hassle of having to drill and tap stubborn fasteners, whether you're working on a brake job or changing a rotor.

PWR CORE 20 +COMPACT—All the power in a compact size.

DIGITAL BRUSHLESS MOTOR—Delivers high-performance power with up to 1,800 in. lbs of torque

HALO LIGHT—Provides 5X more light than common LEDs, reduces shadows, and lights up your entire workspace for up to 10 minutes

20V Max battery: The Cordless driver comes with a 1.3 Ah Lithium Ion battery and a charger for extended run time; Indicator on the the front of the battery to display how many power left for less downtime on the job

Variable speed trigger: Variable speed switch adjust speed by the amount of trigger depression; The trigger switch(0 and 2800 RPM) allows to control your own drilling speed which perfects for what you are setting up for

Tool-less bits change: With this special chuck, you can easily and quickly remove bits from the tool by simply pulling back on the collet; Insert the bits into the collet; No tools necessary

🎁 Perfect present for Christmas, Birthday, Anniversary, Valentine's Day, etc

Efficient Drill with High-Performance Motor: This 20V Cordless Drill Driver provides 354 IN-LB(40NM) MAX POWERFUL TORQUE and allows you to select between 2 speed settings (0 – 410 RPM or 0 –1750 RPM), so you will always have the power you need, high performance & stable motor makes the work faster, easier, more enjoyable. WOKPRO impact drill set makes everything easier than before, a formidable all-around helper for matching your desires, perfect for professionals and DIYers.

Powerful Impact Drill & 21+2 Torque Selector: The 20V Cordless Drill with impact function exerts high-frequency vertical impact (23000 BPM max) while drilling, making drilling in Brick, Cement Wall, and Concrete more efficient. 20V Cordless Drill with a total of 21 different torque settings and 3 in 1 working modes (screw driving, drilling, impact drilling), allows you to select different speeds depending on the task at hand and helps you complete a wide range of applications.

[Premium Drill Performance] : Avid Power Cordless Drill With superior motor, 277 In-lbs of torque is perfect for drilling wood, metal, plastics, and all screw driving tasks at home; Max torque for drilling into wood 13/16”(20mm) or steel plate 3/8”(10mm)

[2 Variable Speed Cordless Drill] : Choose from 1 of 15+1 torque options on the clutch and engage this device with the variable-speed trigger in 1 of 2-speed settings (0-350 RPM or 0-1250 RPM) to match your desired application.

[Ergonomic Design] : Compact and lightweight power drill design make it easy to operate and carry, The cordless drill/driver with battery weighs only 2 lbs. and has a Non-slip Rubber-covered handle for being breezily operated in one hand exceptional command, comfort, and grip.

5 TOOL KIT—Brushless 12V 1/2 Inch Drill Driver, 1/4 Inch Hex Impact Driver, Oscillating Multicolor, Area Light and Bluetooth Speaker. Includes two 2.0Ah Lithium Batteries and one PW Jump Charger.

LONGER RUN TIME & BATTERY LIFE—Industry leading PW Core 12 lithium battery technology wraps each cell with cooling material to keep battery powering on for 25% longer run time and 2X battery life.

CHARGES IN 5 MINUTES—PW Jump charges the battery up to 25% in just 5 minutes, or 100% battery in 45 minutes.

P277 DRILL DRIVER: 24 setting clutch and dual speed gearbox gives you control over your drilling power while the keyless chuck makes for easy bit replacement to let you get to your jobs faster.

P235 IMPACT DRIVER: With its gearbox housed in cast aluminum, this driver has 1600 in-lbs of torque coupled with a belt clip for easy access and a 1/4 inch quick connect coupler for easy bit changes.

ONE+ COMPATIBLE: These two included batteries can work with any Ryobi tools in the One+ system. These 18 volt batteries live long for any job, from drilling and driving to strimming and sanding, and the P118 charger can handle any Ryobi battery, whether it is lithium ion or NiCad.

TWO-IN-ONE IMPACT DRIVER/WRENCH: Features a 1/4 in. hex shank and a 1/2 in. square drive, for using either bits or sockets

POWERFUL BRUSHLESS MOTOR: Delivers a max of 1,800 in.-lbs. of torque and up to 4,200 ipm for professional power

VERSATILE DRIVER/WRENCH: Eliminates using socket adapters, delivering more torque directly through the 1/2 in. square drive anvil

21+1 Torque Setting - SnapFresh Cordless Drill is equipped with 21 different torque settings and 1 special drill mode, which can help you deal with both hard and soft materials. The 21+1 torque settings of this power drill provide precise control for driving in/out screws to prevent stripping, and drilling into wood, ceramics, drywall, plastics, and even metal with ease.

2 Variable Speeds & 20 Voltage - The electric drill with 20 voltsage means enough torque-spinning strength to overcome resistance. This 2 variable-speed (0-400 & 0-1400 RPM) cordless drill gives you the versatility for drilling different materials (e.g. wood, ceramics, drywall, plastics, etc.) and using a variety of bits. The low speed of the cordless drill is for driving screws, and the high speed is for drilling holes.

2.0Ah Battery & 60min Fast Charger - The cordless drill with battery and charger is packed with a higher capacity indicator that lets you finish your job smoothly with long-lasting performance. After 1 hour of being charged, the idling operation of the battery power drill with a charger can last 50-60 minutes.

DELIVERS 1,500 POUNDS OF TORQUE to take on tough applications

QUICK BIT CHANGES due to the 1/4-inch quick connect coupler

ONBOARD MAGNETIC HOLDER for easy access or storage of your fasteners

VARIABLE SPEED TRIGGER: Simply pull the trigger further back to increase the rate of impacts with this driver. No knobs or switches necessary

MAGNETIC BIT TRAY: If you’re high up on a ladder where you don’t want to be fumbling with screws or bits, you can keep them on the tool’s magnified base

QUICK CHANGE CHUCK: No tools necessary to replace bits. Simply press the bit in to lock it, and when you’re finished, pull back the chuck cuff to release

【1/2 In. Drill Driver】 2 speed transmission (0-380RPM/0-1450RPM), 310 in-lbs (35Nm) torque, 18 + 1 position clutch with 1/2 in. Keyless chuck offers precise speed control and torque adjustment when drilling holes and driving screws on different surfaces.

【1/4 In. Impact Driver】1/4 in quick release hex collet, variable speed trigger, 3,500 IPM, 1,950 in-lbs (220Nm) torque, 2,800 RPM for a wide variety of driving applications.

【Highly Efficient Brushless Motor & 2×2Ah Batteries】 delivers more power at 2X More Torque, cooler operation at high speeds, enhanced battery runtime and longer service life. 2×2Ah batteries can ensure that your Greenworks tool is always ready for use when you are

POWERFULL COMBO. Comes with 2 powerfull tool set of 1/2 in. Drill / Drive and 1/4 in. Impact Driver to ensure you get any job done with out hassle. Brushless motor technology provides steady realiable power.

REVOLUTIONARY TECHNOLOGY. The ONE+ HP Brushless Compact Series provides concentrated power in a lightweight design, ideal to use for extended durations in confined spaces and when working overhead.

SYSTEMATIC BATTERY. 18V One+ Cordless System features over 175 tools that all work on the same 18V battery platform. Pair any of our 18V tools with any of our 18V batteries, even the original tools from 1996

🔨One Year Warranty🔨

🔨【Tool Set with Drill 107-Piece】 🔨If you are looking for a decently priced tool kit for your home, Jar-owl tool kit is a good purchase. This is a comprehensive kit came with a host of other tools including a 21v powerful cordless drill, screwdrivers, pliers, precision screwdriver with 4 bits, sockets, measuring tape, bubble level, and some more stuff. You will get a great box of tools for the favorable price.

🔨【All Copper Motor , 21V Power Cordless Drill with LED】🔨The 18+1 speed adjustable 21V cordless hammer drill can drill into wood,metal,plastic,etc. Max drilling capacity is 22mm(7/8"") for wood, 10mm(3/8"") for steel. 2-Gear-option with max torque 247 in-lbs for high (0-1350rpm) or low (0-350rpm) speed drilling/driving speeds. The forward and reserse variable speed trigger is easy to control drilling speeds and reverse out drill bits.

P236 IMPACT DRIVER: With multiple useful features like a notched rubber grip mold for comfort and a keyless, tool-free bit changing system, the P236 is a powerful piece of hardware that will dish out up to 1,500 inch pounds of torque for as long as your Ryobi One+ batteries will keep it charged

MAGTRAY: Keep fasteners or bits stored safely on this impact driver’s magnetic tray, located conveniently at its base. With its help, you’ll be able to work with both hands on the driver, switching applications in a flash as needed

P119 CHARGER: This compact charger fits over the top of your lithium ion or NiCad batteries to keep them charged for a variety of tasks around the home

🎁【1600In-lbs Powerful Torque & Impacts】RIDA High-performance 4-pole copper motor delivers 1600In-lbs(180Nm) of maximum torque and 4000BPM of impacts, to support you on tough and stubborn fasteners, to meet efficient fastening tasks and a large range of applications, help to tackle screw on wood, plastic, and metal with great ease, ideal for any work around the home or the people who are tasked with driving screws and tightening nuts.

🎁【1/4” All-Metal Hex Chuck & Variable Speed】RIDA impact driver 1/4” hex chuck and all-metal gearbox provide maximum durability. No tools needed, remove or insert bits by simply pulling back on the collet easily and quickly. Different from the two shifting buttons, the speed trigger offers easy control of speed adjustment from 0-2800RPM; Prefect for repairing work, furniture assembling and other DIY hand working. The forward/reverse switch allows screws driving or unscrewing with convenience.

🎁【LED Work Light & Lightweight Design】 Trigger-active LED work light at the foot of the impact driver which can increase your visibility in any dark environment and let you effortlessly screw wood, plastic, drywall, brick, concrete, and metal. Lightweight design can help you fit into tighter areas, ultra-lightweight(3.6 Lbs) make it effortless to be used for a long time, thus minimizing user fatigue.The metal belt clip helps to keep the driver when on a ladder or somewhere you need.

Powerful motor provides up to 1800 in./lbs. of torque

Fast driving with up to 3,400 IPM

1/4 in. quick connect collet for easy bit changes

➤ CORDLESS DRILL DRIVER - This 20v electric drill only takes ONE HOUR to charge and meet your whole day work due to powerful and large capacity 1.5Ah battery.This Lithium-Ion battery fits for 100+ PowerSmart tools.With 3 type cleaning brush, this drill driver can meet all your cleaning purposes, like cleaning tires, cushion, sinks and gas stove or more.

➤ 18+1 TORQUE CLUTCH SETTING & 2 SPEED SETTING - Max Torque of 300 in-lb Power Drill has 19 adjustable clutch setting. Two variable speed mode(no-load speed:0-350rpm /0-1500rpm) can be switched by speed change lever that is on the top of the electric screwdriver. Freely Adjustment for your comfortable working mode.

➤ SAFETY & ADJUSTABLE TRIGGER LOCK - There is the forward/reversed button for the bi-directional drill bit rotation. The build-in LED light will be turned on for lighting up the front while the trigger is switched. This cordless drill has the trigger lock (Moving the lever to the center off position) for preventing from incident happened.

2655 In-lbs High Torque - All copper motor delivers 2655In-lbs(300Nm/221ft-lbs) of maximum torque and 3800BPM of impacts, which will help you handle fastening tasks and a large range of applications efficiently, including screws on wood, plastic, and metal.

2.0A Battery & Fast Charger - Battery is featured with charging and discharging protection, which makes charging extremely safe and battery more durable. The battery will be fully charged within 1 hour with provided fast charger, saving your precious time during work.

1/4’’ All-metal Quick Release Hex Chuck - 1/4’’ hex chuck and all-metal gearbox provide maximum durability. Quick release design will let you easily and quickly remove or insert bits within 2 seconds by simply pulling back on the collet.

🎁Practical Father's Day Gifts - Top Rated 21-Volt cordless drill driver with battery and charger.

💎【3/8’’ Auto Chuck, 25+3 Clutch & 2-Variable Speed】JayLene Cordless Drill Set with large 3/8"(10mm) keyless chuck can provide you superior bit retention. Equipped with 3-in-1 working mode (Screw Driver, Drill and Impact Hammer). This variable-speed (0-450RPM, 0-1500RPM) and 25+3 position drill is a powerful all-round helper for matching your desires, perfect for household reconstruction, improvements, DIY handcrafts, renovation, garden work, or auto repairs.

💎【Powerful Robust Motor, Max 398 IN-LB for Versatile Use】JayLene drill toolset is designed with all-copper double-bearing gear motor, high-performance motor delivers strong and steady power and an endurable run time. JayLene drill with the max 398 IN-LB (45NM) torque fits a wide range of projects from screwing to metal or wood drilling. Join in JayLene, and explore more crazy life hacks (buffing, peeling, grinding, etc.) with his 21V Max drill.

[Powerful Brushless Motor] The brushless motor is more suited to cordless tools. Compared to a brushed motor, a brushless motor impact driver performs better, lasts longer, and is cheaper, providing greater productivity on the job. The DCK 20V impact driver kit with variable speeds up to 2000 r/min and high torque up to 1600 inch-lbs, allows our power impact driver to drive screws or tighten nuts at impressive speeds. It's suitable for metal, wood, parts mounting, etc.

[Smart Loosen Technology & 1/4" All Metal Chuck] Smart loosen mode turns on when the green light on the cordless impact drill battery is on. It will automatically stop when tightening screws, providing excellent speed and torque balance for a wide range of uses. The speed is controlled by pressing the variable speed switch, the higher the pressure, the higher the speed. The 1/4" all metal hex impact driver for quick change chuck will improve work efficiency and save working time.

[Forward & Reverse, 2-speed Transmission] The high-impact driver headset can be operated in both forward and reverse directions by simply pressing the reverse switch on the impact driver body. The 2-speed trigger design allows the power impact driver kit speed range to reach 0-2000 RPM. For more precise control, the direction and speed can be freely controlled according to different needs during operation.