Best Plastic Power Scroll Saws in 2026

[2 SAWS IN 1] Pivoting, push-button head turns your jigsaw into a reciprocating saw and back again in just seconds

[ORBITAL CUTTING] The slight circular motion is more efficient for most materials than the traditional back and forth stroke. Get the job done quicker, with less strain on your hands

[DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products

3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

[SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

[CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts

[TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal

For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood

Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned

Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals

2X Strength Tree Saw with Pole For Branches Less than 2" in Diameter: This telescoping tree pruner pole saw is designed for pruning and is our best high-reach dual-use pruning saw on the market

Thumb Lever Clasps to Maintain Reach: Extend to needed length for branch, then tighten screws with screwdriver to prevent pole slippage. Screws can also be used to adjust thumb lever tension

High Reach Tree Pruning Tools: 36 feet of trimming reach so you never need a ladder again. For best results and to reduce flex, always extend and use the thicker lower pole segments first.

Powerful, lightweight 1.2-amp scroll saw ideal for a variety of woodworking projects

Die-cast aluminum table bevels from 0 to 45 degrees

Includes two durable 5" tungsten carbide blades with a throat depth of 16" and a cutting depth of 2-1/2"

Huge Cutting Capacity: The cutting capacity of the band saw: without base: 4.7"x4.7" deep-cut capacity for rectangular stock, 5" capacity for round stock. With base: 3.9"x3.2" deep-cut for rectangular stock, 3.93" for round stock.

Powerful Motor: 1100W 10 amp powerful, pure copper motor, designed with controlled power to withstand any jobsite application. Cutting Speed: 137.8-472.4ft/min, provides quick and smooth cutting with no sparks and burrs.

Ergonomics Design: Superior balance allows for more accurate cuts. Ergonomic soft grip back handle provides comfort during use. The saw blade guard can be adjusted to avoid the saw blade from jamming and is safer without hurting your hands.

Motor: 1/6 HP, 120V, 0.6A

Variable speed motor

Blade speed: 550-1600 SPM

🚀±45⁰ Bevel Cutting & 4 Orbital Setting🚀: 45⁰ adjustment with 4 Orbital settings, fit into different angle and material cutting. More flexible and accurate for working.

🚀3000 SPM Power & 6 Various Speeds🚀:Powerful 4.5 Amp motor of jigsaw tool generates up to 3,000 spm of cutting power needed for the most materials. 6-bit variable speed allows you to control the cutting speed and accuracy, and handle various applications and materials with higher accuracy.

🚀Tool-free Blade Change & Dust Extraction🚀: Replace saw blades in a matter of seconds with the tool-free blade Clamp. This jig saw kit options to connect with vacuum cleaner. Clear sawdust by using the dust blower or connecting the dust port to a vacuum cleaner for clear sight of cutting line and neat working environment.

[GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts

[TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site

[ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between

4 Main Updates about the 2022 model: Larger steel worktable, updated blade holder, changing knob, and cast aluminum tension knob

Motor: 1.2-Amp DC Motor provides Quiet and Powerful Performance, variable speed providing up to 1600 RPM no-load speed

Worktable: Updated18.2-by-11.5-inch iron worktable can bevels up to 45 degrees to the left for angled cuts. Cutting depth is 2-Inch with a 16-Inch throat depth

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, Carbon and Aluminum arrow shafts, and mini model making

High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel- no sanding required!

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, arrow shafts, and mini model making

While this mini table saw bring your hope to the reality. Unibody 3mm thich steel frame and aluminum alloy panel with 775 type high torque motor which maximum rotating speed up to 7000RPM providing ultra strong cutting power but low noise.

The cutting table is quipped with ruler, baffle meeting your accure cutting needs and safety.

Come along with B12 drill chuck with 0.6-12mm clamping capacity can be used as the electric polisher or drill when install the corresponding pars.

【Adjustable Cut Depth】The height of the saw blade from the table top is adjustable, with a range of 0-0.59 inch. And this small table saw with a cut depth of 0-1/2 inch. We provide 4 commonly used circular saw blades, which can meet your basic cutting needs!

【Application】Suitable for PCB, Small wooden stick, Acrylic, Thin wood, Plastic, Model material cutting, Aluminum alloy, Iron and Stainless steel cutting, etc. With this small table saw you can easily make some small crafts, small woodworking projects!

【Convenient】It is a very tiny table saw, please check the machine size in the third picture (L x W x H) 7x5.5x3", weight 4.2 lbs, compact size, easy to carry and small space. Equipped with a transparent safety baffle, does not block your sight. It can perform 90° right-angle cutting and 45° bevel cutting.