Best Blomiky Rc Battery Chargers in 2025

Super Capacity - 2800mAh AA 1.2Volt & 1100mAh 1.2V AAA Ni-MH rechargeable batteries, long-lasting for daily devices.

Individual AA AAA Battery Charger - EBL the newest upgraded 8-bay battery charger, easy to charge any number of AA AAA NiMH NiCD rechargeable batteries.

Unique Trickle Charge - Adopting -∆V intellectual cut-off charging method, automatically turn to trickle charge, protect batteries and prolong battery life.

AA AAA Battery Charger: EBL upgraded individual charger for aa aaa rechargeable batteries, freely working for 1-8 Ni-MH Ni-Cd Double aa and triple aaa rechargeable batteries.

8-Bay battery charger with smart LED to show its charging progress: Red Light-Charging; Green Light -Fully Charged; Red LED Flash: a bad battery or non-rechargeable batteries.

Controlled by MCU, automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.Apdoted advanced fire-proof material, makes ebl batteries charger more safety

Compact charger - A smart battery charger for NiMH battery packs of 8.4V-9.6V(7-8 cells) and capacity range of 600mAh-2500mAh. NOTE: This charger is only for recharging NiMH batteries, do not charge LiPo batteries.

Hobby battery charger - Power many hobbies with one charger. Charge NiMH 8.4V-9.6V battery packs for your airsoft guns, RC cars, and or remote controlled toys. Includes a mini Tamiya connector, mini to standard Tamiya adapter.

Easy-to-use - The LED indicators helps you quickly determine your battery status; green light for fully charged and red light for charging.

Lipo bag for charging and storage LiPO batteries and battery packs

Fire retardant lipo battery bag - Made with triple-layered flame retardant protection material

Velcro seal design reduces airflow and oxygen.

INPUT CONNECTORS: 14 AWG 4mm banana plugs. OUTPUT CONNECTORS: compatible with TRX(male), Tamiya(male) - Large, EC3(male), JST(female), Futaba(female), XT60(male), T-Dean(male), DIY Bare Wire

Had protective cover caps for open contacts of adapters not being used, no need worry about them touching and shorting out.

Octopus Charging Harness for TB6,TB6B,TB6AC Balance Charger; Material: silicone, High temperature resistant.

100-Watt 12-amp output optimized for faster LiPo balance charging

Recognizes Traxxas iD-equipped batteries to automatically program and optimize charger settings

Supports Traxxas EZ-Peak Live Application

Parallel Time-saving Charger: This charger can charge 3 batteries & 1 remote controller simultaneously. It takes only 60-80 mins to complete a full charge of 3 batteries in total. Input: 110-240V; Output: 17.5V 13.5A (branch: 17.5V 4.5A);

Safty Protection: The shell is subjected to anodic oxidation without conductivity, as well as the connection to the ground, double insurance safer.The built-in safety system fully protects the charger from overcharge, over voltage, over temperature and short circuit.

Durable Material: This charging hub is made of premium aluminum alloy. The sturdy hard shell is fire-proof, heat-resistant and fast in heat dissipation

MODEL：SL12-12-03E INPUT: AC120V 0 .30A 50/60Hz Output: 12.0V =1.0A ; Connector: B-type Plug; Cable Length: 6FT;

Compatibility:12v kids Electric Car Charger for Yamaha Raptor 700R and Toyota FJ Cruiser Dumar MegaTredz Motion Trendz Ride On 12v Kids Car Toys.12v Battery Charger for Special Riding On Toys.

International Safety Certification:Our Products Have Passed the U to L Test and Got the CertificatesHigh Efficient and Safe to Charge.Over Voltage output Protection, Over Current output Protection, Short Circuit output Protection.

Latest Version iMAX B6AC V2 Charger by SkyRC

Sold by Autnorized US Dealer - 100% Authentic Guaranteed

Dual Power AC/DC Input - Max. 6A charge current and 50W charge power.

🔋🔋【Support Battery Type】-the battery balance charger supports 7 types of batteries: Lipo:3.7V-22.2V(1S-6S),LiFe:3.2V-19.2V(1S-6S),Li-ion:3.7V-22.2V(1S-6S),LiHv:3.8V-22.8V(1S-6S), NiMH: 1.2V-18V(1S-15S), NiCd: (1.2V-18V)1-15 cell, PB: 2-20V(1-10 Cells), which satisfies your need of choice

🔋🔋【Multiple Functions】-Compare to a regular digital balance charger,C150 Battery Charger comes with features like Li-ion and LiPo balance charging, fast charging, data storage, battery meter, NiMH cyclic charging and discharging and much more for all of your battery packs

🔋🔋【Smart Protection】-Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold. Data storage and loading: This Charger allows you to memorize up to 20 memory data of yours battery.Firmware update

9 In1 charging adapters in 1 - Plug lots of different stuff into your charger,It's enough to have one adapter.

Input Connectors: 4.0mm Banana Plugs & smooth flexible silicone wire.

Out Connectors: JST-SYR-2P ,T plug , XT60(female) , EC3(male) ,DIY wire(2pcs) and other connectors as the picture shows.

Includes TN267 charger and lipo charging bag, the charger is designed to balance charge 1S - 4S Li-Ion/Li-Po/LiFePO4 battery packs. Charging Current: 0.9 +/- 0.1A

LED indicator let you know the status of your battery. Voltage 100V-240V external AC adapter.

Wide voltage compatibility - Choose between Li-Po and Li-Fe with a switch, and use this battery pack balance charger to recharge 1-4 cells on LiPo/Li-ion 3.7V-14.8V or LiFePO4 3.2V-12.8V batteries.

LiPo powered, providing higher power output versus NiMH glow drivers

Switching power transfer (low heat dissapation)

LED indicator light allows users to detect if the glow plug is good or not

Advanced, user-friendly Smart G2 charging technology that fits into any hobby budget

Delivers 55W of charging power

Includes selectable IC3 and IC5 charging ports — no separate adapters required

The package height is 1.114"

The package length is 6.6"

The package width is 3.0"

200 Watt, 26+ amp dual battery charging capability with Maxx charge feature to get you back in the action quickly

Recognizes Traxxas ID-Equipped batteries to optimize charger settings with one button LiPo storage charge to protect your battery investment

Bluetooth connectivity for mobile devices running Traxxas Link app featuring advanced mode for full manual control

☄1.Input: AC 100-240V 50/60Hz, Battery socket output: DC 13.05V/2.2A (single port), Number of interfaces: 4 battery interfaces

☄2.Approx. 50-60 minutes for 1 or 2 batteries, Approx. 60-70 minutes for 3 or 4 batteries. Built-in smart charging protection chip, safety during charging.

☄3.Built-in Intelligent safety charging module: Overcharge Protection, Overheat Protection, Overcurrent Protection, Short Circuit Protection, Overvoltage Protection...etc.

The 12V 400mA-700mA NiMH battery charger can charge NiMH/NiCd battery packs that are 4.8V, 6V, 7.2V, 8.4V, 9.6V 12.0v (2-8 cells). NOTE: This charger is only for recharging NiMH/NiCd batteries pack, DO NOT charge LiPo batteries, li-Ion battery or any type of lithium battery

AC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device

RC Car Battery Charger for NimH NiCd battery pack froAC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device

This adapter allows you to use your batteries that have a Deans style connector with an ESC that has an XT60 Connector on it

Use for convert battery with T-Plug to XT60 on ESC / charger

Plug is convenient,stable performance;Welding is firm,able to bear large current!

Genuine SKYRC iMax B6AC V2 Charger/Discharger

Better security: The adapter(1pcs included) is equipped with a fuse and high-quality wire to prevent excessive transient current from damaging the battery and equipment. You can use it safely

Perfectly compatible : work with for Dewalt 20V /18V DCB200 DCB203 DCB205 DCB206 Li-ion batteries. Easy to install ,locks on you battery very well.

Easy to DIY operate: The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better.

🔥【Why do you need lipo battery bag】- Do you know the potential dangers of lipo batteries? Once the battery is shorted, it will instantly generate high temperature and spontaneously ignite, which brings danger to you and your family. If you know this risk, you should purchase a battery bag, store the battery, and keep the battery inside the bag while charging.

🔥【Safeguard liPo battery】- FLASLD Fireproof LiPo Battery safe storage bag is a convenient way of safe guarding your Lipo batteries during charging, transit, and storage. Release your mind when the lipo is on charging, while you have to leave away for a while by closing the lipos in the bag. The LIPO SAFE BAG is intended to reduce the chances of damage in the event of a lipo fire.

🔥【Three-proof battery bag】- FLASLD battery bag is fireproof - temperature resistance up to 1800℉, explosionproof - three-layer composite material is firm and reliable, waterproof - Silicone coating is waterproof and protects the battery.

Powerful AC/DC multi-charger with dual 100W output, ability to charge virtually all battery types, and an intuitive LCD display

Charges 1-6 C (Li-Po, LiHV, LiFe); 1-15C (NiMH, NiCd); 1-20V (Pb) lead acid batteries

Integrated voice functionality

👌Fast Charging: Our fast RC Battery Charger has AC DC dual input, AC: 100-240V; DC: 11-18V. High power and high performance circuit - maximum output power 150W. Charge current: 0.1-10A; Discharge current: 0.1-2A; Max discharge power: 10W. Built-in cooling fan, it also has power switch and a 5V 2.1A USB output port. Our charger's shell is made of fire-proof material. When you charge the battery, please don't use the AC power cable and DC cord at the same time.

👌Features: Our rc charger is suitable for 1-6s LiPo/LiFe/LiHV/Li-ion, 1-15s NiCD/NiMH, 2-20V PB and Smart Battery I/II/III. Automatic identification of lithium batteries cells counts. C150 rc battery charger is upgrade version of B6, it has multiple charging modes: Charge, Balance Charge, Discharge, etc. When the battery is full charged, the battery charger will automatically stop charging. Tips: Please choose the right type of battery when charge.

👌Multi-extra Function: The rc charger has these functions--1.Battery meter- display lithium battery cell counts, total voltage, battery capacity percentage, and each cell's voltage; 2. Lithium battery internal resistance checking; 3.Battery balancer; 4.Digital DC power; 5.Supports for smart battery.

✌{VARIETY BATTERY CHARGING} Our B6V2 RC BATTERY CHARGER is upgrade version of B6 charger, it can support a variety of battery types: LiPo, LiFe, Li-ion, LiHV, NiMH, NiCD, Pb batteries, smart batteries. When the battery is full charged, the battery charger will automatically stop charging. The chargers's shell is made of fire-proof material.

✌{MULTI-MODES} The 80W 6A DC11V-18V battery charger has charge mode, discharge mode and balance mode, with the charge mode and discharge mode, you can adjust the voltage and current, with the balance mode, it will automatically adjust the voltage and current, you don't need to adjust the voltage or current. When you charge the battery, please don't use the AC power cable and DC cord at the same time.

✌{MULTI-FUNCTIONS} Except charge mode, balance mode, and discharge mode, this rc charger also has other functions: terminal voltage control; battery capacity & voltage checking; battery internal resistance checking; storage mode; data storage and memory loading; meter; digital DC power.

Charger and Lipo bag - Tenergy TB6-B balance charger/discharger is designed for hobby battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs. Added lipo bag for charging and storing lipo battery.

Wide connector compatibility - With one multi-charging harness, this AC balance charger is compatible with battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added.

Works with multiple voltages - Compatible with battery packs with voltages that ranges from 6 to 12 for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion battery packs with voltages from 3.7 volts to 22.2 volts (1s-6s).

❗❗❗ATTENTION❗❗❗The end of the charger may be larger than you think, but it is a standard connector for XH-3P, please confirm the size of the connector before purchasing, detailed parameters are in the second picture, thank you!

⚡[Circuit Protection] - The 2s battery charging cable has over-voltage, overload and short-circuit protection functions. This LiPo battery USB charger is only suitable for 7.4V LiPo batteries. It is equipped with a XH-3 PIN PLUG.

⚡[Efficient charging] - The lipo battery charger is specially used for charging 7.4V lithium polymer battery, input: DC 5V, output current: 1000mA, the specific output current is determined by the POWER PLUG you use.

100% Brand new and high quality，The old and new versions are sent randomly. The new version has been upgraded. Lighter weight. Performance is better. More safer.

With the development of electric technology, we have a new design of easy compact balance charger for 2 and 3 cells LiPo battery fast charging with wide AC input.

A internal 100-240V AC switch power is built in, and the high precision balance circuit can supply larger current up to 850mA per cell.

Stay charged up- The 12V 400mA NiMH battery charger can charge NiMH/NiCd battery packs that are 9.6V (8S). NOTE: This charger is only for recharging NiMH/NiCd batteries, DO NOT recharge LiPo batteries or Spike the Dinosaur.

Hobby battery charger - Power many hobbies with this NiMH/NiCd 9.6V (8S) battery pack charger for your RC cars and or remote controlled toys. Includes a standard/large Tamiya connector. Before purchasing, we recommend finding the voltage and connector for best fit.

Easy-to-use - The simple LED indicators on this 9.6V battery charger quickly know your battery charging status. Green light for fully charged and red light for charging.

For H99W H31 H6C H98 AT-96 TR-C385 TR-P51 TR-F22 SYMA Q11 quadcopter

Can charging 5 batteries at one time, over charge protection, short circuit protection.

Batteries come equipped with built-in protection mechanism for safe charging and use.