Best Dynamite Rc Battery Chargers in 2026

[Universal Voltage Compatibility]- the battery balance charger support LiPo/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. LiHV 3.8V-22.8V(1S-6S). NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. PB 2-20V (1-10 Cells) and smart battery.Note: Do not choose the wrong type of battery when charging.

[Multiple Functions]: Compare to a regular digital balance charger,C150 Battery Charger comes with features like Li-ion and LiPO balance charging, fast charging, data storage, battery meter, NiMH cyclic charging and discharging and much more for all of your battery packs

[Terminal Voltage Control]- This Charger allows user to set the charge/discharge end voltage of the battery. For example:lipo battery end voltage is 4.2V /cell when charing, while on this charger, the end voltage is adjustable, rangs from 3.85v to 4.3v. Warning: this features for expert only!

9 In1 charging adapters in 1 - Plug lots of different stuff into your charger,It's enough to have one adapter.

Input Connectors: 4.0mm Banana Plugs & smooth flexible silicone wire.

Out Connectors: JST-SYR-2P ,T plug , XT60(female) , EC3(male) ,DIY wire(2pcs) and other connectors as the picture shows.

LiPo powered, providing higher power output versus NiMH glow drivers

Switching power transfer (low heat dissapation)

LED indicator light allows users to detect if the glow plug is good or not

The 12V 400mA-700mA NiMH battery charger can charge NiMH/NiCd battery packs that are 4.8V, 6V, 7.2V, 8.4V, 9.6V 12.0v (2-8 cells). NOTE: This charger is only for recharging NiMH/NiCd batteries pack, DO NOT charge LiPo batteries, li-Ion battery or any type of lithium battery

AC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device

RC Car Battery Charger for NimH NiCd battery pack froAC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device

Powerful AC/DC multi-charger with dual 100W output, ability to charge virtually all battery types, and an intuitive LCD display

Charges 1-6 C (Li-Po, LiHV, LiFe); 1-15C (NiMH, NiCd); 1-20V (Pb) lead acid batteries

Integrated voice functionality

❗❗❗ATTENTION❗❗❗The end of the charger may be larger than you think, but it is a standard connector for XH-3P, please confirm the size of the connector before purchasing, detailed parameters are in the second picture, thank you!

⚡[Circuit Protection] - The 2s battery charging cable has over-voltage, overload and short-circuit protection functions. This LiPo battery USB charger is only suitable for 7.4V LiPo batteries. It is equipped with a XH-3 PIN PLUG.

⚡[Efficient charging] - The lipo battery charger is specially used for charging 7.4V lithium polymer battery, input: DC 5V, output current: 1000mA, the specific output current is determined by the POWER PLUG you use.

Stay charged up- The 12V 400mA NiMH battery charger can charge NiMH/NiCd battery packs that are 9.6V (8S). NOTE: This charger is only for recharging NiMH/NiCd batteries, DO NOT recharge LiPo batteries or Spike the Dinosaur.

Hobby battery charger - Power many hobbies with this NiMH/NiCd 9.6V (8S) battery pack charger for your RC cars and or remote controlled toys. Includes a standard/large Tamiya connector. Before purchasing, we recommend finding the voltage and connector for best fit.

Easy-to-use - The simple LED indicators on this 9.6V battery charger quickly know your battery charging status. Green light for fully charged and red light for charging.

★【Upgrade Balanced Dual Charger】The dual lipo battery charger is upgrade version of C150, It has two separate channels, which can charge two different batteries at the same time, without affecting each other. Charge your RC battery faster and safer. A variety of modes can meet all your needs, such as Balance charge, normal charge, fast charge, Storage charge, Discharge, Cycling, and Battery Meter. But the operation is simple.

★【Charge Various Batteries 】Widely used in various batteries, 3.7 V to 22.2 V(1s-6s) LiIon/LiPo/LiFe/LiHV, 1.2V-18V(1s-15s) NiMH/NiCD, 2-20V PB and smart battery(I,II, III 5-27V,0.1-6A). You can charge two different batteries with 2 channel at the same time. No longer have to wait for the battery to charge, you can have more fun playing.And balanced charging can protect your battery and prolong its service life.

★【Terminal Voltage Control】The rc lipo battery charger is allowed to set the charge/discharge voltage. Full plastic shell, safe, compact, beautiful. C240 with auto built-in cooling fan.Two independent and dedicated charging circuits support AC and DC input current, AC：CH1+CH2=150W(Dividable, e.g. CH1=50W, CH2=100W ), Reach a safe voltage to balance charge batteries again and again, perfectly meet your needs. DC: 120W for each Channel.

▶Dual Model--The rc battery charger has AC/DC dual input model. This dual lipo battery charger is upgrade version of C150, twin-channel 2 in 1 charger, charge two different kinds of batteries simultaneously. High-power and high-performance circuit. Distributable circuit power in AC model: CH1+CH2=150W. In DC model each port circuit power can reach 120W. Please connect the charger with the main plug at first, then connect the main plug with the battery.

▶Support Batteries--The rc charger supports charging, discharging and balance charging batteries: 1-6s LiPo LiFe LiHV Lilon,1-15s NiCd/NiMH, 2-20V PB and smart battery. Automatic identification of lithium batteries cells counts.Support multiple charging models. Please choose the right type of battery when charge. You can charge two different batteries at the same time, but please don't charge two different batteries at the same channel.

▶Multi-extra Functions--Our lipo battery charger has multi-extra functions: 1.Battery meter- display lithium battery cell counts, total voltage, battery capacity percentage,each cell's voltage; 2. Lithium battery internal resistance checking; 3.Battery balance charge; 4.Adjustable digital DC power; 5. Suitable for Smart battery; 6.Cycle Charging; 7. Discharge. Please connect the charger with the main plug at first, then connect the main plug with the battery.

★Multifunctional 19 charging adapters in one,used for different kinds of batteries.

★Multi-Charging cable banana plug used in the charger, abandoning the original multi-way adapter, making the battery and charger to achieve each branch, and while a single wire makes.

★The main output line using 14AWG soft silicone wire that can withstand 80A current.

Included 2600mAh Sub-C Ni-MH battery

Sure-Lock Glow Plug Attachment for hands-free charging

Contoured Comfort Grip Finger Clip

2-6S battery charger balance board, high quality silicone wires, works with 2S - 6S batteries with a balance plug.

The adapter plugs into the 6-cell balance port on the charger, and breaks out into the 2S, 3S, 4S, 5S and 6S connectors.

With this adapter, work with any battery from 2 cells up to 6 cells.

2 in 1 RC Battery Charger: The Melasta RC charger has a standard Compatible with tamiya connector that fits most NiMH RC batteries and it comes with an extra for HXT 4.0mm banana plug for Redcat Hexfly NiMH batteries. Universally charges Ni-MH or Ni-CD battery packs of 2.4V-12V voltage.

Smart Trickle Charger: Automatically detects the voltage of your battery and shuts off when battery is fully charged in order to avoid over-charge. Charges at a 800mA for 2.4V-7.2V battery or 500mA for 8.4V-9.6V battery. Typical charging time is 6-10 hours depends on battery capacity.

Intuitive Charge Indicator: LED light on the charger stays in Red during charging process and turns Green when battery is fully charged. Flashing red indicates that there is a bad connection. Lights off means charger is defective, replace needed..

Parameter: 2S-3S Lipo Battery Charger, AC110-240V input, max charge current: 3*2000mA. Especially there is separated corresponding balance port for each battery pack. Quick charge, save 60% time!

Balance Charger: Each cell is charged by independent line, which make sure that each power supply is always fully charged, extending the battery life.

Convenient and Useful: This Supulse lipo charger is compact and light, especially there is separated corresponding balance port for each battery pack.

❤【Wide Battery Type Compatibility】-Similar to our B6 V2, just better.It has the similar function, but is lighter and more cost-effective!The balance charger with high performance microprocessor can charge and discharge a variety of batteries such as 1.2V-18V NiMH/NiCD batteries (1-15 Cells), 3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells), 3.2V-19.2V LiFePO4 batteries (1-6 Cells), and 2V-20V SLA batteries.Note: Do not choose the wrong type of battery when charging.

❤【Multiple Practical Functions】-The lipo charger is built in an independent Lithium Battery Balancer to monitor and balance each battery cell, and it has Fast & Storage Charging function, Data Storage & Load function, Cyclic Charging & Discharging function,security for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion battery packs.

❤【Easy To Operate】-View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Follow the instructions and you will find it so easy to operate. Connect the battery and charger, select the mode, and start charging.

Charge connector plug: XH-3P white 3 pin ,plug end cross-section size: 10*5.8mm/0.4*0.23inch(L*W).Plug is XH-3P white 3 pin plug, plug cross-section size:0.4*0.23inch /10.2*6mm(L*W) . Built-in protection circuit, red light change to orange or green light after full charged.Package include 2 Pack 7.4V 2S Lipo Battery Power Adapter Wall Charger. Charger fit for Skytech TKKJ H1100 H101 H102 H103 H105 H106 H108 RC Boat battery

Built-in protection IC overcharged protection. Balance charger fit for ENGPOW 7.4V 3000mah 30C Lipo Battery.7.4V balance Charger with XH-3 Pin connector, fit 7.4V Battery for RC Quadcopter ,RC Boat, RC Drone,and RC Truck,

Wall Power Adapter charger fit for RC Quadcopter Drone Truck Car Boat battery <br>Charger replacement for 7.4V 2S Zeee Flouren Gens ace Tattu Goldbat Hosim OVONIC HRB 7.4V 6000mAH 5200mAh 5000mAH 4000mAh 2200mAH 1500mAH 1300mAh 1200mAH 1000mAH 850mAH 600mAH 350mAH 700mAH 1100 mAH 2S 2 Cell Li-ion or Lipo Battery.

Strictly prohibited to use this charger to charge lithium batteries and to charge less than 3 Series Ni MH batteries pack !!! AUTO STOP SMART BATTERY CHARGER- Charges the NiMH/NiCd battery pack of 3-9 cells(3.6V,4.8V,6.0V,7.2V,8.4V,9.6V, 10.8V). The battery is automatically powered off when fully charged, LED turn green. We design our own circuit and control software. If someone plagiarizes, we reserve the right to investigate the responsibility

TRICKLE CHARGE- The maximum charging time is 6 hours. There is trickle current after the power is 100mA. Fast charge for NiCd/NiMH battery pack.

HOBBY BATTERY CHARGER- With Delta Peak detection function, at the same time can eliminate the memory effect of the battery. Power all your hobbies with one charger. Such as battery packs for Airsoft, RC Cars, and or remote controlled toys. Includes standard size Tamiya connector, standard to mini Tamiya adapter, JST, T plug, JR FUTABA, MCX, MCP X, TX 5.5 X 2.5

Compatible for Holyton remote control car, Axial SCX24 SCX10 RC car, FPV Drone Quadcopter, boat, Hosim Q903 Q905, Trucks, gel baster, splatter ball gun

7.4V 1A 2S lipo battery USB charger cable

XH-3 pin connector

SMART UNIVERSAL BATTERY CHARGER- Charges the NiMH/NiCd battery pack of 2-10 cells(2.4V,3.6V,4.8V,6.0V,7.2V,8.4V,9.6V, 10.8V,12V). Power all your hobbies with one charger. Such as battery packs for rc helicopters, tamiya rc trucks, Airsoft gun, RC Cars, and or remote controlled toys. Includes T Plug, Huanqi Plug, Tamiya battery Plug, mini tamiya battery plug, JST battery plug, SM 2P battery plug, Futaba/JR Receiver Plug.

PROLONG BATTERY LIFE &USAGE TIME: There is trickle current and smart charging manage system, the battery pack will be charged more fully and more balanced. Built-in protections guards against over-charge, over-current, short circuit and reverse polarity, protects your battery and extend life.

AUTO STOP SMART BATTERY CHARGER: If you plug in power, this Rc charger will automatically detect the battery voltage and match the right current to charge, it will shut off when battery is fully charged in order to avoid over-charge.Charging time is 6-10 hours depends on your battery capacity.

Package included:1pcs USB Power Adapter Charger Cable.

When the battery is fully charged,the indicator will change.The intelligent load identification chip blocks excessive current.

Suit for TR-211 RC Excavator and Huanqi 516 558 RC tank 538 RC car and other similar RC toys.

【Intelligent NiMH/NiCD Battery Charger】The charger is professionally designed for 2-8s(2.4-9.6V) NiMH/NiCD battery used in airsoft gun, drone, RC car,RC boat, and other RC toys. It's compact and portable, and has an elegant design. With overcharge protection, overcurrent protection,overvoltage protection,etc.

【Input and Ouput】 AC input voltage:100-240V. Output power：20W, charging current: 1A/2A. Charging current can be selected with a switch on the side of the charger. 1 amp is recommended for battery with a capacity of less than 2200 mA, and 2 amp are recommended for battery with a capacity higher than 2200 mA.

【Easy to Use】The battery connector of the charger is a standard Tamiya, and it also comes with a standard Tamiya to mini Tamiya charging cable, and a standard Tamiya to alligator clip charging cable, which can meet your various needs. You can charge your NiMH/NiCD battery easily, just need to connect the power and connect your battery to the charger.

Individual cell balancing Li-ion, LiPo and LiFe ,LiHV/PB/smart battery capable Ni-Cd and NiMH capable

Universal Voltage Compatibility-LiPo/Li-ion 3.7V-22.2V (1S-6S), LiFePO4 3.2V-19.2V (1S-6S), NiMH/NiCD 1.2V-18V(1S-15S)，SLA（ 2V-24V), PB (2-20V); The Lipo Battery Charger is ideal for all hobby battery packs, compatible with various kind of RC toy battery, like RC drone, RC car, RC Robot, RC boat and for airsoft.

Microprocessor control Delta-peak sensitivity, the lipo charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for safety.

【Suitable for All Battery Types】The lipo battery charger is ideal for all hobby,such as rc car,boat,airplane,racing,Drone FPV. One lipo balance charger for all rc battery packs,recharge a wide variety of chemistry configurations like LiPo 3.7V-22.2V (1-6S), LiFepo 3.2V-19.2V, LIHV 3.85V-23.1V (1-6S), NiMH/NiCd 1.2V-18V (1-15cells), Pb/SLA,Smart Battery.

【AC/DC RC Quad】100Wx4/10Ax4 AC/DC 4 port lipo battery charger/discharger delivers the power you need to get your batteries charged fast and eliminates the need for an external power supply!The hobby battery charger is capable of charging four completely different types of batteries at the same time.This rc lipo battery charger features a Hi-Voltage LiHV mode that allows you to safely charge Hi-Voltage LiHV capable batteries.Maximum 10A Charge Current,up to 100W Per Channel.

【Multiple Functions】The lipo battery /charger discharger features numerous functions which includes fast charging,data storage,LIHV and LiPO balancing,cyclic charging,delta sensitivity discharging,time limit function,10 profiles data storage.The lipo charger with balance has an excellent LCD display which is visible to show the charging and discharging status of the charging device.This rc car battery charger allows user to set the charge/discharge end voltage of the battery.

【High-quality and safety】- B6 charger is made of high-quality chips and materials to provide you with high-quality products and function performance, This charger also has short-circuit protection, overcharged protection, overcurrent protection and overheat protection. Make sure operating safety.

【Multiple Battery Compatibility】- This B6 charger can charge a variety of rechargeable batteries, including NiCd/NiMH batteries, Li-ion batteries, LiPo batteries, LiFe batteries, LiHV batteries and Pb batteries. LiPo/Li-ion: 1S-6S(3.7V-22.2V); NiMH/NiCd: 1S-15S(1.2V-18V) ;PB: 2-20V; LiFe: 1S-6S(3.2V-19.2V); LiHv: 1S-6S battery packs can be charged or discharged by the balance charger. You only need this one charger can meet your charging needs for different batteries.

【Multifunctional Charger】- In addition to charging the battery, this charger is also equipped with balance battery function. You don't need to adjust the voltage and current, just choose the battery type that suits you. It also has fast and storage charging functions, data storage and loading functions, and cyclic charging and discharging functions.

Package included: 1pcs 2S Lithium Battery Balance Charger.

7.4V Charger with XH-3 Pin connector, fit most 7.4V Battery for RC Quadcopter ,RC Boat, RC Drone,and RC Truck.

Function:Intelligent IC control circuit is adopted internally to balance the charging of 7.4V lithium battery.

Dynamite USB Charger, NiMH 6C EC3 Connector, DYNC1061

AUTO STOP SMART BATTERY CHARGER- Charges the NiMH battery pack and nicd battery pack of 3-8 cells(3.6V,4.8V,6.0V,7.2V,8.4V,9.6V) with traxxas plug. The battery is automatically powered off when fully charged；

TRICKLE CHARGE- The maximum charging time is 6 hours. There is trickle current after the power is turned off. Fast charge for 3.6V-9.6V NiMH/NiCd Battery Packs.

HOBBY BATTERY CHARGER- With Delta Peak detection function, at the same time can eliminate the memory effect of the battery. Power all your hobbies with one charger. Such as battery packs for rc helicopters,Airsoft, RC Cars, and or remote controlled toys. Includes standard size traxxas ,Tamiya connector, standard to mini Tamiya adapter；

Circuit Protection - The SUPULSE 2s battery charging cable has over-voltage, overload, overcharge and short-circuit protection functions. This LiPo battery USB charger is only suitable for 7.4V LiPo batteries. It is equipped with a XH-3 Pin plug. Please make sure that the length, the voltage and the plug match before use.

Efficient Charging - The SUPULSE lipo battery charger is specially used for charging 7.4V lithium polymer battery, input: DC 5V, output current: 800mAh.

Indicator Light - The SUPULSE lipo battery USB charger cable has an indicator light, the green light is flashing and the red light is solid when it is charging; the green light and the red light are solid when it is fully charged; if the red light is flashing quickly, it means an alarm.

Material: Made from the highest quality parts available and carefully assembled.

Features: XH-3P 7.4V USB Charger Cable Can be used with any USB socket charger adapter.

Features: It has a protection IC unit for protection against overload and short circuit. Green and red LED indicators show if it is still charging or fully charged. The output has an XH-3P plug, 3-pin port connector.