Best Syma Rc Battery Chargers in 2026

[Universal Voltage Compatibility]- the battery balance charger support LiPo/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. LiHV 3.8V-22.8V(1S-6S). NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. PB 2-20V (1-10 Cells) and smart battery.Note: Do not choose the wrong type of battery when charging.

[Multiple Functions]: Compare to a regular digital balance charger,C150 Battery Charger comes with features like Li-ion and LiPO balance charging, fast charging, data storage, battery meter, NiMH cyclic charging and discharging and much more for all of your battery packs

[Terminal Voltage Control]- This Charger allows user to set the charge/discharge end voltage of the battery. For example:lipo battery end voltage is 4.2V /cell when charing, while on this charger, the end voltage is adjustable, rangs from 3.85v to 4.3v. Warning: this features for expert only!

The 12V 400mA-700mA NiMH battery charger can charge NiMH/NiCd battery packs that are 4.8V, 6V, 7.2V, 8.4V, 9.6V 12.0v (2-8 cells). NOTE: This charger is only for recharging NiMH/NiCd batteries pack, DO NOT charge LiPo batteries, li-Ion battery or any type of lithium battery

AC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device

RC Car Battery Charger for NimH NiCd battery pack froAC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device

❗❗❗ATTENTION❗❗❗The end of the charger may be larger than you think, but it is a standard connector for XH-3P, please confirm the size of the connector before purchasing, detailed parameters are in the second picture, thank you!

⚡[Circuit Protection] - The 2s battery charging cable has over-voltage, overload and short-circuit protection functions. This LiPo battery USB charger is only suitable for 7.4V LiPo batteries. It is equipped with a XH-3 PIN PLUG.

⚡[Efficient charging] - The lipo battery charger is specially used for charging 7.4V lithium polymer battery, input: DC 5V, output current: 1000mA, the specific output current is determined by the POWER PLUG you use.

▶Dual Model--The rc battery charger has AC/DC dual input model. This dual lipo battery charger is upgrade version of C150, twin-channel 2 in 1 charger, charge two different kinds of batteries simultaneously. High-power and high-performance circuit. Distributable circuit power in AC model: CH1+CH2=150W. In DC model each port circuit power can reach 120W. Please connect the charger with the main plug at first, then connect the main plug with the battery.

▶Support Batteries--The rc charger supports charging, discharging and balance charging batteries: 1-6s LiPo LiFe LiHV Lilon,1-15s NiCd/NiMH, 2-20V PB and smart battery. Automatic identification of lithium batteries cells counts.Support multiple charging models. Please choose the right type of battery when charge. You can charge two different batteries at the same time, but please don't charge two different batteries at the same channel.

▶Multi-extra Functions--Our lipo battery charger has multi-extra functions: 1.Battery meter- display lithium battery cell counts, total voltage, battery capacity percentage,each cell's voltage; 2. Lithium battery internal resistance checking; 3.Battery balance charge; 4.Adjustable digital DC power; 5. Suitable for Smart battery; 6.Cycle Charging; 7. Discharge. Please connect the charger with the main plug at first, then connect the main plug with the battery.

For H99W H31 H6C H98 AT-96 TR-C385 TR-P51 TR-F22 SYMA Q11 quadcopter

Can charging 5 batteries at one time, over charge protection, short circuit protection.

Batteries come equipped with built-in protection mechanism for safe charging and use.

B6 balance charger/discharger is ideal for all hobby 6S(22.2v) battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs.

Made of high-quality chips and materials to provide you with high-quality products and function performance, and the charger also has short-circuit protection, overcharge protection, overcurrent protection and overheat protection for safety design.

Microprocessor controll Delta-peak sensitivity; Li-ion and LiPO balancing, fast charging, data storage, cyclic charging, discharging, and much more for all of your battery packs.

【Parameter】2S & 3S Lipo Battery Charger, AC110-240V input, max charge current: 3*800mA.

【Balance Charger】Each cell is charged by independent line, which make sure each power supply is always fully charged, extending battery life.

【Convenient & Useful】This Supulse lipo charger is compact and light, especially there is separated corresponding balance port for each battery pack.

❤【Wide Battery Type Compatibility】-Similar to our B6 V2, just better.It has the similar function, but is lighter and more cost-effective!The balance charger with high performance microprocessor can charge and discharge a variety of batteries such as 1.2V-18V NiMH/NiCD batteries (1-15 Cells), 3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells), 3.2V-19.2V LiFePO4 batteries (1-6 Cells), and 2V-20V SLA batteries.Note: Do not choose the wrong type of battery when charging.

❤【Multiple Practical Functions】-The lipo charger is built in an independent Lithium Battery Balancer to monitor and balance each battery cell, and it has Fast & Storage Charging function, Data Storage & Load function, Cyclic Charging & Discharging function,security for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion battery packs.

❤【Easy To Operate】-View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Follow the instructions and you will find it so easy to operate. Connect the battery and charger, select the mode, and start charging.

Charge connector plug: XH-3P white 3 pin ,plug end cross-section size: 10*5.8mm/0.4*0.23inch(L*W).Plug is XH-3P white 3 pin plug, plug cross-section size:0.4*0.23inch /10.2*6mm(L*W) . Built-in protection circuit, red light change to orange or green light after full charged.Package include 2 Pack 7.4V 2S Lipo Battery Power Adapter Wall Charger. Charger fit for Skytech TKKJ H1100 H101 H102 H103 H105 H106 H108 RC Boat battery

Built-in protection IC overcharged protection. Balance charger fit for ENGPOW 7.4V 3000mah 30C Lipo Battery.7.4V balance Charger with XH-3 Pin connector, fit 7.4V Battery for RC Quadcopter ,RC Boat, RC Drone,and RC Truck,

Wall Power Adapter charger fit for RC Quadcopter Drone Truck Car Boat battery <br>Charger replacement for 7.4V 2S Zeee Flouren Gens ace Tattu Goldbat Hosim OVONIC HRB 7.4V 6000mAH 5200mAh 5000mAH 4000mAh 2200mAH 1500mAH 1300mAh 1200mAH 1000mAH 850mAH 600mAH 350mAH 700mAH 1100 mAH 2S 2 Cell Li-ion or Lipo Battery.

Charge connector plug: SM-2P black 2 pin, only suitable for 3.7V 400mAh 500mAh 800mAh Li-ion or Lipo rechargeable small battery, don't advise use in big capacity battery,such as 1500mAh battery, it may take over 10-15 hours to full charge.

3.7V USB Charger cable suitable for Small Size RC Cars RC Boat, RC Trucks ,charger cable suitable for AUSUT EACHINE EC21 Amphibious NQD SPESXFUN 1/16 RC Vehicle Sharkool 4WD Stunt RC Car Cars 500mAh Li-ion Battery

3.7V 1S USB Charger cable suitable for DEERC DE42 DE44 DE45 DE68 DE69 RC Trucks , Charger cable suitable for BEZGAR TS201 TC141 TB202 TB201 1:20 Scale RC Trucks, Charger cable suitable for Seckton Small Remote Control RC Car 3.7V Battery

Strictly prohibited to use this charger to charge lithium batteries and to charge less than 3 Series Ni MH batteries pack !!! AUTO STOP SMART BATTERY CHARGER- Charges the NiMH/NiCd battery pack of 3-9 cells(3.6V,4.8V,6.0V,7.2V,8.4V,9.6V, 10.8V). The battery is automatically powered off when fully charged, LED turn green. We design our own circuit and control software. If someone plagiarizes, we reserve the right to investigate the responsibility

TRICKLE CHARGE- The maximum charging time is 6 hours. There is trickle current after the power is 100mA. Fast charge for NiCd/NiMH battery pack.

HOBBY BATTERY CHARGER- With Delta Peak detection function, at the same time can eliminate the memory effect of the battery. Power all your hobbies with one charger. Such as battery packs for Airsoft, RC Cars, and or remote controlled toys. Includes standard size Tamiya connector, standard to mini Tamiya adapter, JST, T plug, JR FUTABA, MCX, MCP X, TX 5.5 X 2.5

110V Charger for Syma Mini Helicopters

Can be used on Syma Helicopters with small Charging Plug

Faster Charging with less Battery Drain on Transmitter

SMART UNIVERSAL BATTERY CHARGER- Charges the NiMH/NiCd battery pack of 2-10 cells(2.4V,3.6V,4.8V,6.0V,7.2V,8.4V,9.6V, 10.8V,12V). Power all your hobbies with one charger. Such as battery packs for rc helicopters, tamiya rc trucks, Airsoft gun, RC Cars, and or remote controlled toys. Includes T Plug, Huanqi Plug, Tamiya battery Plug, mini tamiya battery plug, JST battery plug, SM 2P battery plug, Futaba/JR Receiver Plug.

PROLONG BATTERY LIFE &USAGE TIME: There is trickle current and smart charging manage system, the battery pack will be charged more fully and more balanced. Built-in protections guards against over-charge, over-current, short circuit and reverse polarity, protects your battery and extend life.

AUTO STOP SMART BATTERY CHARGER: If you plug in power, this Rc charger will automatically detect the battery voltage and match the right current to charge, it will shut off when battery is fully charged in order to avoid over-charge.Charging time is 6-10 hours depends on your battery capacity.

Features: USB Connectors to use with any USB Outlet charger adapter. Has a IC Protectionunit, for protection against over charge and short-circuit. Green and Red LED Indicators show if it is still charging or fully charged. Output has a XH-3P plug, 3 Pin Port Connector. Created from the Highest Quality Parts Available and Put Together with Care, to charge Your LiPo Batteries fast and safe.

Specifications: Input: DC 5V, Output current: 7.4V - 800mA - XH-3pin plug 4 hours to charge fully. Has Intelligent overload protection, over-voltage protection and overcharge protection.

Compatible with 7.4V 2S LiPo or Li-ion battery less than 1500mAH, large capacity battery over 7.4V 1500mAH, will take over 10 hours to charge fully. USB Charger Adapter fit for: RC Drones and Quadcopters, WLtoys and Skytech H100 H102 H101 H105 H106 RC Sgile Robot, Boat and other RC Vehicles.

Package includes:1pcs USB charging cable.

Input:5V 0.5-2A,Output: 4.2V 300mA.

Specialized designed for Attop XT-1 RC drone.

3.7V 550mAh 20C Lipo Battery(4PCS) with 4 In 1 Battery Charger

Charger Voltage input: DC 5V; Voltage output: 4.2V ± 5%; Current output: 350mAh - 410 mAh

Charging 4 battery at one time, Over charge protection, Short circuit protection

Individual cell balancing Li-ion, LiPo and LiFe ,LiHV/PB/smart battery capable Ni-Cd and NiMH capable

Universal Voltage Compatibility-LiPo/Li-ion 3.7V-22.2V (1S-6S), LiFePO4 3.2V-19.2V (1S-6S), NiMH/NiCD 1.2V-18V(1S-15S)，SLA（ 2V-24V), PB (2-20V); The Lipo Battery Charger is ideal for all hobby battery packs, compatible with various kind of RC toy battery, like RC drone, RC car, RC Robot, RC boat and for airsoft.

Microprocessor control Delta-peak sensitivity, the lipo charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for safety.

【High-quality and safety】- B6 charger is made of high-quality chips and materials to provide you with high-quality products and function performance, This charger also has short-circuit protection, overcharged protection, overcurrent protection and overheat protection. Make sure operating safety.

【Multiple Battery Compatibility】- This B6 charger can charge a variety of rechargeable batteries, including NiCd/NiMH batteries, Li-ion batteries, LiPo batteries, LiFe batteries, LiHV batteries and Pb batteries. LiPo/Li-ion: 1S-6S(3.7V-22.2V); NiMH/NiCd: 1S-15S(1.2V-18V) ;PB: 2-20V; LiFe: 1S-6S(3.2V-19.2V); LiHv: 1S-6S battery packs can be charged or discharged by the balance charger. You only need this one charger can meet your charging needs for different batteries.

【Multifunctional Charger】- In addition to charging the battery, this charger is also equipped with balance battery function. You don't need to adjust the voltage and current, just choose the battery type that suits you. It also has fast and storage charging functions, data storage and loading functions, and cyclic charging and discharging functions.

Upgraded Battery Charger Set, Charger Protection Function

ShowJade Registered Products

Package include: 1pc USB Cable, 1pc Charging box

For syma X5U X5UC X5UW WIFI FPV RC Drone

The charger can charge 5 batteries at one time.Batteries come equipped with built-in protection mechanism for safe charging and use.

Over charge protection, Short circuit protection, Easy to install

✔✔ Battery Size:45 x 25 x 9mm, Battery Weight:16 gram

✔✔ Volt:3.7V(1S),Capacity: 600Mah, Plug:MX-2.0 plug,Discharge Rate:20C

✔✔ Fits for Syma X5C X5SW Hengqi 905 Cheerson CX-30 RC Quadcopter

High Efficiency Charging: Designed for 1S 3.7V Lithium polymer Battery or Li-ion Battery. Input: DC 5V 1A-2A; Out Put: 3.7V 400mAh; Connector: USB to SM-2P Plug; Length: 2ft/60cm.

Wide Applications: URGENEX lipo battery USB charger cables are compatible with 3.7V RC car, truck, FPV Drone Quadcopter or boats Li-Po/Li-ion batteries with SM-2P Plug.

Ultra Safe: Our high technology enables Intelligent IC Protection. Built-in overload, over-voltage, overcharge IC protection circuit. Please make sure that the voltage(3.7) match before use.

High-quality and Safety - The Balance charger is made of high-quality chips and materials to provide you high-quality products and function performance, and the charger also has short-circuit protection, overcharge protection, overcurrent protection and overheat protection for safety design.it is very safe to buy.

Multiple Functions -Except charge, balance and discharge, it also has these functions: Terminal Voltage Control; Lithium Battery Capacity & Voltage Checking; Battery Internal Resistance Checking,Let you know when a cell is going bad;Data Storage and Memory Loading(Store up to 20 packs in memory); Digital DC Power.Automatically identify the cells counts of lithium battery section.Support LiHV battery.

Wide Voltage Compatibility - Use the battery pack balance charger on LiPo/Li-ion 3.7V-22.2V（1-6 cell）;LiFePO4 3.2V-19.2V (1S-6S);LiHv: 1-6 cell; NiMH/NiCd 1.2V-18V (1A-15S);PB: 2-20V; Smart Battery: I,II,III. So it is very useful.

The item suit for SYMA X8C X8G X8HW Hubsan H501S H502S H502E H501A H501C H501M H501S W H501S pro MJX B3 B2W B6 Bugs 2/3/6 B3H BUGS 3H A959 V262 V913 V912 D80 H216A F18 F17 F100

Over charge protection, Short circuit protection, Easy to install.

The charger can charge 2 batteries at one time, easy to use.

⚡RC DRONE BATTERY CHARGER: Introducing the ultimate Drone Battery Charger, designed to keep your drones, remotes, droids, and toys powered up and ready to go! With a 1-6S AC/DC 80W capacity, this charger can handle all your charging needs.

⚡LIGHT INDICATOR: the LED indicator, allowing you to charge up to 5 batteries at once and monitor the charging status with ease. When the battery is being charged the red light will be solid, if the light goes out it means that the charging is completed, the lights are independent so there is not any interference with each other, very easy to understand the status of batteries.

⚡MULTIPLE PORTS CHARGER: It features a RC Charger Micro 5 Ports, 5 ports design makes multiple batteries be able to be charged at the same time, effectively save your time.

1. Battery compatibility: Hubsan H107C H107L Syma Q11 X11C HS170C F180C TOZO Q2020 E016H A120 XK A150 H31 TR-P51 TR-F22 AT-96 RC drone

2. Set with 1PCS 5 in 1 charger, can charge 5 batteries at the same time. Charge is faster and efficient.

3. The package includes a 5PCS battery with a capacity of 400mAh. When the drone is exhausted from the battery power, the spare battery can be replaced immediately without having to worry about the problem of insufficient electricity.

Compatibility: Compatible with Syma X5C, X5SC, X5SW, H107C.

Usage : This cable fit for charging the quadcopter on the USB port. Battery range : Lithium Polymer, Lithium Cylindrical, Lithium Digital, Lithium Remote Controller.

Input Voltage : DC 5V, Input Current : 0.5-2A, Output Voltage : DC 4.2V, Output Current : 500mA

Battery Charge for Syma Helicopter

USB 3.7V