Best Infrared Remote Control Extenders in 2026

BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.

IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!

WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!

IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission

Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely

Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting

An ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet for a clean, stylish look

IR Repeater system allows you to Control home theater components located behind cabinet doors

Included with the system is - IR Receiver (2 inches by 1/2 Inch); Hidden IR Repeater Controller (3 1/2 Inches by 2 Inches); 2 dual IR emitters blaster

IR Repeater system allows you to Control Home Theater Components Located behind Cabinet Doors

Included with the system is - IR Receiver ( 2 inches by 1/2 Inch ) ( 10ft Cable )

Hidden IR Repeater Controler ( 3 1/2 Inches by 2 Inches )

Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices

IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc

IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet

Note: The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module

This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.

It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including Arduino/51/AVR/ARM

KIT INCLUDES - 1 x IR receiver extender with built in power cell charger. 1 x Power adapter. 1 x Single eye IR emitter. 1 x Transmitter. 1 x Transmitter adapter for AA compartments. 2 x power rechargeable power cells.

MODERN & MINIMAL - Simplify and streamline your entertainment center with this IR repeater kit. Use our IR extender for Chromecast remote to extend power and volume distance, Alexa voice remote with power and volume, Alexa voice remote pro to extend power and volume , Roku simple remote extends distance (Not compatible with Roku voice remote and voice remote pro) TV, cable box, , receiver, amp, Blu-ray player, and controlling various IR-controlled devices to extend distance and versatility.

MORE CONTROL FOR TV - Wield greater control over your TV volume and channel changing ability. Use it as a wireless cable TV extender to change the channel or adjust the volume from any room, including downstairs to upstairs. Works with all AA and AAA remotes.

MOUNT HDTV ANYWHERE WITHOUT THE WIRES – Replaces HDMI cables with wireless technology, so you can stream full HD directly from your cable or satellite box. Ditch the HDMI cable and mount your HDTV anywhere, without sacrificing quality

HD DIGITAL SIGNAL FOR MOVIES & GAMING– Wirelessly stream clear, 1080p HD 2D/3D video and digital audio (5.1 surround) through walls, floors & ceilings, to your HDTV or projector up to 150 ft away to watch movies, TV shows and do online gaming.

SUPPORTS HDMI DEVICES – This wireless video HDMI display kit works with TVs and projectors with an HDMI input. The device wirelessly connects to most cable, satellite, Blu-ray, set-top boxes, and other media and gaming consoles with an HDMI output.

High sensitivity: Remote control signal receiving real-time response to fast forward without delay

Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands

Easy Setup: This IR Repeater System is easy to use and sets up in minutes

★★With 1 IR distribution block,1 receiver which picks up the signal from the remote controller, the receiver is with a convenient IR confirmation LED .</br>Small and easy to hide,high sensitivity,broadband remote control.

★★Suitable for most IR control devices,such as:Amplifier,Cable box,</br>DVD Player,CD Player,Blu-ray player,Stereo receiver ,Satellite TV receiver and so on.PLEASE NOTE, DOES NOT WORK WITH: Cisco RNG150 RNG150N & RNG250 & Marantz devices.

★★With 6 emitters which is used to send the signals to the A/V components,Kit controls up to 8 devices - Expandable to 12 devices (Additional IR emitters sold separately)

WORKS ONLY w/CABLE Set Top Boxes (STB). Please check your device to be sure you have an active 3.5 mini input port labeled "IR IN". Contact us if you have any questions about compatibility before you buy.

20-25 ft range from remote control to IR receiver. High Immunity to ambient light and noise

Highly Reliable with high sensitivity for wide range. Works great with our INT-422 Remote

This Infrared Repeater Cable applies to all remote control devices from 38 to 56 khz

IR Repeater Extension controls Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls

Come with adhesive backing sticks directly onto different devices

IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV

Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors

Place the IR emitter blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting

Allows you to control your audio/video equipment with your infrared remote from another room.

Simple five minute installation; just plug it into an A/C wall outlet in both rooms and you're done.

Transmits up to 100 feet, even through walls

-This IR Repeater Kit Allows You to Control A/V component by the Existing IR Controller, Control the IR Devices Between Two Rooms Such as Adjusting the Volume or Changing TV Channel.

-With 1 Receiver Picks up the Signal from the Remote Controller, the Receiver is with a Convenient IR Confirmation LED

-With 4 emitters send the Signal to the A/V Components

Forward infrared signals to operate electronic components behind closed Doors

Allows for control of devices behind closed Doors

Includes emitters to control up to four devices

✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters away (656 feet), depending on surrounding obstructions. 2 power adapters included.

✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

✅ INSTANT TRANSMISSION: Highly sensitive modules provide real-time signal transmission without delay; built-in LED indicator illuminates when the signal is received for easy status recognition

Infrared HDMI IR Extender can control your IR remote controlled devices in closet or in other rooms.

This IR Repeater supports IR frequency from 20 kHz to 60 kHz which covers nearly all the devices.

Power Free. No Power Adapter Necessary (Uses power over HDMI Cable from HDMI source unit)

30-60KHz operating range

5V USB AC Power adapter (US plug)

One head line with 1 Receiver and 1 Emitter

Passes IR communication: Used with an IR Repeater kit to control a device; Extend remote control ability to any room in the house

Sticks directly onto the AV equipment; Three emitters on a single plug

Adhesive backing allows the emitter to be attached to the IR eye of a device

➤Product: IR Emitter Cable; Jack: 3.5mm; Total Length: 1.5meters; Emission Angle: +/- 45°

➤Works with all 38-56kHz IR remote control and devices with an IR input port.

➤Low current drive, low power consumption, long launch distance, small size installed.

✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters(656 feet) away(line-of-sight), depending on surrounding obstructions.

✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

✅ HIGH PERFORMANCE IR electronics provide real time signal transmission without delay ; Features Click Lock ID button pairing the transmitter and receiver, preventing interference from other devices.

The IR Transmitter and Receiver Extends IR signal using a repeater also know as IR repeater kit. Upgraded- with a Dual Freq IR Receiver for the latest in technology in Audio and Video Controls

IR Extender Kit includes - IR Distribution Block - Mini IR Receiver - (2) Dual IR Emitters - AC/DC Adapter. Everything you need in an IR Kit from IR sensors and receivers for complete AV Control

Our Electronic Accessories are Simple to use - Basic Plug and Play - Controls 4 devices out of the box, (expandable to a maximum of 12 devices). Offers Full Infrared TV and cable box control

★ PLUG AND PLAY – Our IR extender cable is easy to install and use. Just plug the 3.5mm jack into an IR input port of your device, realize the reception and amplification of infrared remote control signals immediately, no extra power required.

★ UNIVERSAL COMPATIBILITY – Suitable for frequency of 38-56KHz infrared devices with an IR input port and remote control, such as Cable Boxes, Set-top Box, Car-mounted DVD, Car Audio System, Hard Disk Player, DVR, PVR, Satellite Receiver, etc. (not compatible with Yamaha RX-V677))

★ 10FT CABLE – 10 feet long cable with 3.5mm plug allows you to extend the infrared signal into 49.21ft, horizontal half angle 45 degrees, self-adhesive backing let you paste on wall and remote control all devices with a IR range of 38-56kHz.

Allows you to control multiple pieces of equipment with only one IR output. Such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player or other components which are controlled by IR signal

Sticks directly onto the AV equipment; 1 emitter on a single plug. Non visible (blinks only infrared light) high output version. Lead is terminated with a 3.5mm mono mini plug.

THESE ARE EMITTERS AND NOT RECEIVERS please refer to description. Compatible with IR Repeater Extender System Kit

Complete Signal Solution: Throw away the shackles IR signal restriction, move around freely and still remotely control your clean, sleek, and concealed A/V or IR-enabled equipment, up to 656 feet (200m) wireless RF signal between transmitter and receiver no direct line-of-sight needed

Universal Compatibility: Dual Band IR receiver recognizes frequency ranges from 20 to 60 kHz; compatible with most IR-equipped remote devices such as cable boxes, smart TV / TVs, satellite receivers, audio/Hi-Fi stereo systems, home theaters, even your front gate!

Instant Reliable Transmission: Highly sensitive ultra-wide receiving angle ensures instant real-time signal transmission without delay.

Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and compatible with devices in 38khz. PLEASE NOTE: Please confirm if this device suitable for your machine. Any problem please contact us first. We will resolve.

The Infrared Emitter Extension Cable comes with adhesive backing sticks directly onto different devices

For use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers

【The wireless hdmi transmitter signal can be up to 150m 500ft (line of sight)】Moretop wireless hdmi transmitter receiver MT-HD3503 can transmit 5-30m/32ft-100ft when pass through 1 wall like glass wall ,wood wall or hollow wall , but can not pass through or only up to about 3-5m when pass through some thin concrete walls. The distance will be be varied due to the environment.wall, bricks or glass will shorten the signal cover range or cause significant signal loss.

【Support Full HD 1080p ,2.4G/5.8G wireless dual-band signal transmit】. Moretop wireless hdmi extender supports 480p,576p,720p,1080p, the receive image is clear and stable, colorful and high sound quality without noise. Strong anti-interference,faster transmission speed by 5G Wireless dual-band signal. It work 5.8G default, So sometimes have signal conflict or inference from other wireless device ,then you can go to web to set it work 2.4G and other channel by hand to avoid these proble.

【Lower latency,Plug and Play and with local loop-out.】The latency time is about 150 ms ,good for you to share PC or players on a big screen. But not recommended for real-time applications, such as PC gaming,high speed sports.but the loop-out has a zero latency and can use for a local display well . Please make sure your source device be connected with the HDMI input of the transmitter ,not the local HDMI output of the transmitter.Otherwise no work and no connecting.

Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!

Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!

Sticks directly onto the AV equipment; Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device.

[COMPATIBLE] with Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD Player, Blu-Ray Player and other streamers as well as most A/V devices.

[CONTROLS] Four (4) home theater devices (expandable up to 18) kept behind a closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller. (Additional IR emitters sold separately)

[PLUG AND PLAY] Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller.