Best Cable Remote Control Extenders in 2026

𝐌𝐀𝐗𝐈𝐌𝐔𝐌 𝐁𝐀𝐍𝐃𝐖𝐈𝐃𝐓𝐇 𝐔𝐏 𝐓𝐎 𝟔.𝟕𝟓 𝐆𝐁𝐏𝐒 - HDMI Over Ethernet Extender Support HDMI 1.4 & 1.3 signal /deep color 36bit/xv-YCC/1080p 24fs/DTS-HD.v-YCC/1080p 24fs/DTS-HD.

𝐄𝐗𝐓𝐄𝐍𝐃 𝐘𝐎𝐔𝐑 𝐕𝐈𝐃𝐄𝐎 𝐒𝐎𝐔𝐑𝐂𝐄 𝐔𝐏 𝐓𝐎 𝟐𝟎𝟎𝐅𝐓 -  For 200ft transmit distance via CAT6/CAT7 LAN cable. For 165ft transmit distance via CAT5e cable.  Zero Video Latency. NOTE: We recommend using direct HDMI to HDMI connections, avoid using signal converters or adapters at all costs.

𝐒𝐔𝐏𝐏𝐎𝐑𝐓 𝐕𝐀𝐑𝐈𝐄𝐓𝐘 𝐎𝐅 𝐕𝐈𝐃𝐄𝐎 𝐅𝐎𝐑𝐌𝐀𝐓𝐒 - HDCP 1.2/1.4 ; 1080P/1080i/720P/576P/576i/480P/480i; 3D video supported

Distribute 4K 1 HDMI source to 8 HDMI displays over Cat6/7/8 Network Cable Simultaneously, Splitter Included - No Switcher Needed - Power Over LAN - No Adapter needed on Receiver Side

Output 4K signal upto 115 Feet with Cat6/7 cable and 1080P signal upto 165 Feet. HDMI Transmitter is equipped with 8 Port CAT6 Output. And 1 Additional HDMI Output to connect to a local display or monitor. Supports HDR, HDR10, HDR10+, Dolby Vision, HLG

Loop Out on Sender Unit, Full IR Remote Control Input. Supports 20~60Hz IR Pass Back, Control a DVD Player or Other HDMI Video Source from a Remote Location with the included IR cables that forward commands over a dedicated DDC Channel.

4K HDMI Extender Balun - Long Range Over CAT5e/6/7 LAN Cable up to 400 feet with Zero Latency | HDBaseT Technology for lossless and lag-free video transmission | Bi-directional IR control enables source device to recognize remote commands from remote display or control the remote display from the source device

Supports HDMI 2.0a HDCP 2.2, UHD 4K/60Hz YUV 4:4:4, HDR, HDR10+, Dolby Vision, 18Gbps bandwidth, CEC and PoC. HDR gives you higher contract and vivid colors for a more realistic viewing experience. Supports DTS-HD, Dolby TrueHD, 7.1ch digital audio and all other HDMI standard formats.

HDMI Loop-out on transmitter unit to connect an HDMI display by the source, RS-232 command control port & Power over Cable – only use one power adapter at either transmitter side or the receiver side to power both units.

IR Repeater system allows you to Control Home Theater Components Located behind Cabinet Doors

Included with the system is - IR Receiver ( 2 inches by 1/2 Inch ) ( 10ft Cable )

Hidden IR Repeater Controler ( 3 1/2 Inches by 2 Inches )

Distribute 1080p 1 HDMI source to 8 HDMI displays over network cable simultaneously, Splitter included - no Switcher needed - power over LAN - no adapter needed on receiver side

Hdmi transmitter is equipped with 8 port Cat6 output. And 1 additional HDMI output to connect to a local display or monitor.

Ire remote control. Supports 2060Hz IR pass back, control a DVD player or other HDMI video source from a remote location with the included IR cables that forward commands over a dedicated DDC Channel.

Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices

IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc

IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet

MOUNT HDTV ANYWHERE WITHOUT THE WIRES – Replaces HDMI cables with wireless technology, so you can stream full HD directly from your cable or satellite box. Ditch the HDMI cable and mount your HDTV anywhere, without sacrificing quality

HD DIGITAL SIGNAL FOR MOVIES & GAMING– Wirelessly stream clear, 1080p HD 2D/3D video and digital audio (5.1 surround) through walls, floors & ceilings, to your HDTV or projector up to 150 ft away to watch movies, TV shows and do online gaming.

SUPPORTS HDMI DEVICES – This wireless video HDMI display kit works with TVs and projectors with an HDMI input. The device wirelessly connects to most cable, satellite, Blu-ray, set-top boxes, and other media and gaming consoles with an HDMI output.

KIT INCLUDES - 1 x IR receiver extender with built in power cell charger. 1 x Power adapter. 1 x Single eye IR emitter. 1 x Transmitter. 1 x Transmitter adapter for AA compartments. 2 x power rechargeable power cells.

MODERN & MINIMAL - Simplify and streamline your entertainment center with this IR repeater kit. Use our IR extender for Chromecast remote to extend power and volume distance, Alexa voice remote with power and volume, Alexa voice remote pro to extend power and volume , Roku simple remote extends distance (Not compatible with Roku voice remote and voice remote pro) TV, cable box, , receiver, amp, Blu-ray player, and controlling various IR-controlled devices to extend distance and versatility.

MORE CONTROL FOR TV - Wield greater control over your TV volume and channel changing ability. Use it as a wireless cable TV extender to change the channel or adjust the volume from any room, including downstairs to upstairs. Works with all AA and AAA remotes.

【𝐀𝐮𝐝𝐢𝐨 𝐑𝐞𝐭𝐮𝐫𝐧 𝐂𝐡𝐚𝐧𝐧𝐞𝐥】Audio DIP switch control on receiver: ARC & S/PDIF allows ARC function or Audio pass through accordingly. Fully supports audio formats in HDMI ARC & S/PDIF specification, DD/DTS 5.1CH and PCM 2.0 via ARC or S/PDIF.

【𝐇𝐃𝐁𝐚𝐞𝐬𝐓 𝟐.𝟎 & 𝐇𝐃𝐌𝐈𝟐.𝟎】Signals without degradation. HDMI Extender Supports 4K@60Hz 4:4:4 8-bit and 4K@60Hz 4:2:2 10/12-bit and 4K@60Hz 4:2:0 10/12-bit up to 40m(130ft) or 1080p up tp 70m(230ft) over Cat5e/6/7 cable. HDCP2.2 compliant and with 18Gbps bandwidth can supports HDR10.

【𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐏𝐨𝐄/𝐂𝐄𝐂/𝐈𝐑 & 𝐑𝐒-𝟐𝟑𝟐 𝐞𝐱𝐭𝐞𝐧𝐬𝐢𝐨𝐧】Bi-directional POWER OVER ETHERNET (PoE) - Allows one power adapter to power both the transmitter and receiver. Bi-directional IR Extends IR signal from receiver to transmitter or from transmitter to receiver. CEC (Consumer Electronics Control) and RS232 pass-through.

CRYSTAL-CLEAR PICTURE: Dont compromise on picture quality. This VGA over CAT5 / CAT6 extender enables you to enjoy a crisp, clear picture with support for resolutions up to 1920x1200 (at 150 ft.) and 1280x1024 (at 250 ft.)

PLUG-AND-PLAY: For easy installation, this VGA to CAT5 extender is designed to be a purely hardware solution, enabling you to cast video over RJ45 ethernet without the need of additional software or drivers

BUNDLED KIT: Conveniently this video extender comes in a bundled kit with a local (VGA over CAT5 transmitter), and a remote unit (VGA over CAT5 receiver), as well as a VGA cable and mounting brackets

INTEGRATE – Our Peephole IR receiver for the BAFX Products Single Zone Repeater kit is designed to be mounted in a wall, cabinet or door so you have more sleek, streamlined look to your setup! This will require you drill a ½” hole in your wall or cabinet, slide the peephole receiver in and tighten using a 5/8” wrench.

FUNCTIONALITY – Our IR sensors can receive signals from 25’ away and up to a 45° angle from the remote control. Can be used with any IR remote controls. Cable is 5’ long from tip to tip with actual cable length of 4’ 10”. Works with any Make model of remote controls as long as they use Infrared technology.

COMPATABILITY – Compatible with the BAFX Products Single Zone IR Repeater / Remote Control Extender Kit ONLY! May not work with other brands of Infrared Repeater Kits! Does NOT work with BAFX Products Triple Zone or Wireless Kits!

★★With 1 IR distribution block,1 receiver which picks up the signal from the remote controller, the receiver is with a convenient IR confirmation LED .</br>Small and easy to hide,high sensitivity,broadband remote control.

★★Suitable for most IR control devices,such as:Amplifier,Cable box,</br>DVD Player,CD Player,Blu-ray player,Stereo receiver ,Satellite TV receiver and so on.PLEASE NOTE, DOES NOT WORK WITH: Cisco RNG150 RNG150N & RNG250 & Marantz devices.

★★With 6 emitters which is used to send the signals to the A/V components,Kit controls up to 8 devices - Expandable to 12 devices (Additional IR emitters sold separately)

Long Distance with Zero Latency: USB extender transmits signals up to 60m/196ft over a single Cat 5e/6/6a/7 cable, achieved stable work with zero latency.

Remote Peripheral Control: Connects up to 4x USB device to your PC remotely, High-speed USB2.0(480Mbps), like a mouse, keyboard, camera, space telescope, game controller, etc.

One-Way PoC: Only one power supply is required at the transmitter side to power both units. It offers you more convenience on installation at the USB peripheral side, like a USB camera.

【1080P HDMI Extender】-- This HDMI extender supports 1080P HD, HD Audio, 3D; It extends HDMI 1080P AV signal to at least 190ft/60m via single cat6 or higher level cables following standard IEEE-568B, For better performance, we suggest to use cable longer than 45ft/15m

【HDMI Lossless transmission】-- It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection,Adjust the specification automatically for different cable lengths 1-60m to achieve the best display

【Pure Hardware Transmission】-- It is pure hardware design,No driver needed, plug and play. Adopt full HD transmission technology to make the video image more vivid

4-PORT EXTENDER/SPLITTER: The 4-Port HDMI over Cat5/Cat6 Extender & Splitter works with Tripp Lite B126-Series remote receivers to split a single HDMI audio/video signal into five separate signals—one local and four remote. It is ideal for digital signs, trade shows, presentations and retail settings.

EXTENDS HDMI OVER CAT5/CAT6: When used with Tripp Lite’s B126-1A0 or B126-1A0-WP-1 active remote receivers, the Extender/Splitter can extend a 1080i (60 Hz) signal up to 200 ft. Can daisy-chain up to 3 units to extend signal to 13 monitors.

TRANSMITTER WITH VIDEO & AUDIO: Supports high-definition video resolutions up to 1080p (60 Hz). In addition to crystal-clear video, the B126-004 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio.

IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV

Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors

Place the IR emitter blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting

Extender the VGA signal 60 meters by a CAT-6 cable

Follow the standard of IEEE-568B;

Use CAT-6 replaces VGA wire,extend VGA image up to 60m/200 ft.

✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters away (656 feet), depending on surrounding obstructions. 2 power adapters included.

✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

✅ INSTANT TRANSMISSION: Highly sensitive modules provide real-time signal transmission without delay; built-in LED indicator illuminates when the signal is received for easy status recognition

Infrared HDMI IR Extender can control your IR remote controlled devices in closet or in other rooms.

This IR Repeater supports IR frequency from 20 kHz to 60 kHz which covers nearly all the devices.

Power Free. No Power Adapter Necessary (Uses power over HDMI Cable from HDMI source unit)

This item is used with an IR Repeater kit to control a device

Passes IR communication when used with IR receiver device

Adhesive backing allows the emitter to be attached to the IR eye of a device

30-60KHz operating range

5V USB AC Power adapter (US plug)

One head line with 1 Receiver and 1 Emitter

IR Extender Cable - Extend the capability of the remote control to any space in the house. With its dual-Head design, you can control multiple devices with a single IR output. Compatible with Xbox One, Apple TV, Disc, Blu-Ray, and IR repeater systems

IR Sensor Extension Cable - Extension cable for IR component source that is compatible with devices operating at 38 kHz and has a 3.5 mm port. This IR receiver extension can support up to six separate connections for emitter outputs

38kHz and 56kHZ - This IR Emitter Extender Cable is capable of handling any IR code format in both 38kHz and 56kHz frequency ranges. This indicates that it is designed for today's more advanced audio-visual equipment

【Long-Distance Stable Transmission】This KVM extender can transmits 1080p HD audio and video signal up to 262ft via a single Cat5/Cat5e/Cat6/Cat6e cable

【Point to Point】【Near Lossless and No-delay】With this extender you only need one power adapter on both end. No delay with K/M control for long distance interactive operation with video near lossless,Support Windows, mac OS, Linux.

【1080p HD Signal】Support 1080p@60Hz / 1080p@50Hz / 1080p@30Hz / 1080p@25Hz 720p@60Hz / 720p@50Hz 480p@60Hz, provide you with a high quality video viewing experience

➤Product: IR Emitter Cable; Jack: 3.5mm; Total Length: 1.5meters; Emission Angle: +/- 45°

➤Works with all 38-56kHz IR remote control and devices with an IR input port.

➤Low current drive, low power consumption, long launch distance, small size installed.

✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters(656 feet) away(line-of-sight), depending on surrounding obstructions.

✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

✅ HIGH PERFORMANCE IR electronics provide real time signal transmission without delay ; Features Click Lock ID button pairing the transmitter and receiver, preventing interference from other devices.

The IR Transmitter and Receiver Extends IR signal using a repeater also know as IR repeater kit. Upgraded- with a Dual Freq IR Receiver for the latest in technology in Audio and Video Controls

IR Extender Kit includes - IR Distribution Block - Mini IR Receiver - (2) Dual IR Emitters - AC/DC Adapter. Everything you need in an IR Kit from IR sensors and receivers for complete AV Control

Our Electronic Accessories are Simple to use - Basic Plug and Play - Controls 4 devices out of the box, (expandable to a maximum of 12 devices). Offers Full Infrared TV and cable box control

Allows you to control multiple pieces of equipment with only one IR output. Such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player or other components which are controlled by IR signal

Sticks directly onto the AV equipment; 1 emitter on a single plug. Non visible (blinks only infrared light) high output version. Lead is terminated with a 3.5mm mono mini plug.

THESE ARE EMITTERS AND NOT RECEIVERS please refer to description. Compatible with IR Repeater Extender System Kit

✔ COMPLETE KIT - Includes 1 Transmitter & 2 Receivers. Extend and distribute 1 HDMI source to 2 HDMI displays over CAT5e/6/7 simultaneously **NOTE: If you live in an area with thunderstorms, plug this product's power adapter into a surge protecter power strip to protect your device from voltage spikes.

✔ HDMI LOSSLESS/UNCOMPRESSED TRANSMISSION - It extends HDMI audio/video signals to synchronous output video display(s) is as fluent as direct connection; Supports 480i/480p/720p/1080i/1080p at 60Hz video resolutions and surround sound up to 7.1-channel or stereo digital audio; Compatible with HDCP compliant devices & content.Up to 40m (130ft) at 1080p@60Hz with CAT5e/6/7. Good quality CATx cables are essential in delivering quality content.

✔ IR REMOTE CONTROL- Allow source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a CAT5e/6/7 cable for convenience

Wirelessly stream HD 1080p video & Audio up to 150ft (clear line of sight) from: TV cable box, Blu-ray/DVD player, gaming console, satellite box, PC, Mac, laptop or from any HDMI source

No Lag Less than 100ms delay Powerful Wireless HDMI System, Supports Anti-Interference technology (5GHz operational frequency) allows multiple sets of TX/RX to work simultaneously in the same room. The Diamond VS50SE is a great solution for conference room meetings, home entertainment and multimedia educational applications

Small Form factor Wireless HDMI Transmitter and Receiver, plugs directly into the HDMI source and HDMI input of the display (No additional HDMI cables) USB powered from your HDMI source/display (No wall mount power adapter required)

Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and compatible with devices in 38khz. PLEASE NOTE: Please confirm if this device suitable for your machine. Any problem please contact us first. We will resolve.

The Infrared Emitter Extension Cable comes with adhesive backing sticks directly onto different devices

For use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers