Best Orei Remote Control Extenders in 2026

BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.

IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!

WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!

IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission

Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely

Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting

𝐌𝐀𝐗𝐈𝐌𝐔𝐌 𝐁𝐀𝐍𝐃𝐖𝐈𝐃𝐓𝐇 𝐔𝐏 𝐓𝐎 𝟔.𝟕𝟓 𝐆𝐁𝐏𝐒 - HDMI Over Ethernet Extender Support HDMI 1.4 & 1.3 signal /deep color 36bit/xv-YCC/1080p 24fs/DTS-HD.v-YCC/1080p 24fs/DTS-HD.

𝐄𝐗𝐓𝐄𝐍𝐃 𝐘𝐎𝐔𝐑 𝐕𝐈𝐃𝐄𝐎 𝐒𝐎𝐔𝐑𝐂𝐄 𝐔𝐏 𝐓𝐎 𝟐𝟎𝟎𝐅𝐓 -  For 200ft transmit distance via CAT6/CAT7 LAN cable. For 165ft transmit distance via CAT5e cable.  Zero Video Latency. NOTE: We recommend using direct HDMI to HDMI connections, avoid using signal converters or adapters at all costs.

𝐒𝐔𝐏𝐏𝐎𝐑𝐓 𝐕𝐀𝐑𝐈𝐄𝐓𝐘 𝐎𝐅 𝐕𝐈𝐃𝐄𝐎 𝐅𝐎𝐑𝐌𝐀𝐓𝐒 - HDCP 1.2/1.4 ; 1080P/1080i/720P/576P/576i/480P/480i; 3D video supported

An ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet for a clean, stylish look

IR Repeater system allows you to Control home theater components located behind cabinet doors

Included with the system is - IR Receiver (2 inches by 1/2 Inch); Hidden IR Repeater Controller (3 1/2 Inches by 2 Inches); 2 dual IR emitters blaster

Distribute 4K 1 HDMI source to 8 HDMI displays over Cat6/7/8 Network Cable Simultaneously, Splitter Included - No Switcher Needed - Power Over LAN - No Adapter needed on Receiver Side

Output 4K signal upto 115 Feet with Cat6/7 cable and 1080P signal upto 165 Feet. HDMI Transmitter is equipped with 8 Port CAT6 Output. And 1 Additional HDMI Output to connect to a local display or monitor. Supports HDR, HDR10, HDR10+, Dolby Vision, HLG

Loop Out on Sender Unit, Full IR Remote Control Input. Supports 20~60Hz IR Pass Back, Control a DVD Player or Other HDMI Video Source from a Remote Location with the included IR cables that forward commands over a dedicated DDC Channel.

IR Repeater system allows you to Control Home Theater Components Located behind Cabinet Doors

Included with the system is - IR Receiver ( 2 inches by 1/2 Inch ) ( 10ft Cable )

Hidden IR Repeater Controler ( 3 1/2 Inches by 2 Inches )

4K HDMI Extender Balun - Long Range Over CAT5e/6/7 LAN Cable up to 400 feet with Zero Latency | HDBaseT Technology for lossless and lag-free video transmission | Bi-directional IR control enables source device to recognize remote commands from remote display or control the remote display from the source device

Supports HDMI 2.0a HDCP 2.2, UHD 4K/60Hz YUV 4:4:4, HDR, HDR10+, Dolby Vision, 18Gbps bandwidth, CEC and PoC. HDR gives you higher contract and vivid colors for a more realistic viewing experience. Supports DTS-HD, Dolby TrueHD, 7.1ch digital audio and all other HDMI standard formats.

HDMI Loop-out on transmitter unit to connect an HDMI display by the source, RS-232 command control port & Power over Cable – only use one power adapter at either transmitter side or the receiver side to power both units.

Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices

IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc

IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet

Distribute 1080p 1 HDMI source to 8 HDMI displays over network cable simultaneously, Splitter included - no Switcher needed - power over LAN - no adapter needed on receiver side

Hdmi transmitter is equipped with 8 port Cat6 output. And 1 additional HDMI output to connect to a local display or monitor.

Ire remote control. Supports 2060Hz IR pass back, control a DVD player or other HDMI video source from a remote location with the included IR cables that forward commands over a dedicated DDC Channel.

Note: The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module

This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.

It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including Arduino/51/AVR/ARM

KIT INCLUDES - 1 x IR receiver extender with built in power cell charger. 1 x Power adapter. 1 x Single eye IR emitter. 1 x Transmitter. 1 x Transmitter adapter for AA compartments. 2 x power rechargeable power cells.

MODERN & MINIMAL - Simplify and streamline your entertainment center with this IR repeater kit. Use our IR extender for Chromecast remote to extend power and volume distance, Alexa voice remote with power and volume, Alexa voice remote pro to extend power and volume , Roku simple remote extends distance (Not compatible with Roku voice remote and voice remote pro) TV, cable box, , receiver, amp, Blu-ray player, and controlling various IR-controlled devices to extend distance and versatility.

MORE CONTROL FOR TV - Wield greater control over your TV volume and channel changing ability. Use it as a wireless cable TV extender to change the channel or adjust the volume from any room, including downstairs to upstairs. Works with all AA and AAA remotes.

MOUNT HDTV ANYWHERE WITHOUT THE WIRES – Replaces HDMI cables with wireless technology, so you can stream full HD directly from your cable or satellite box. Ditch the HDMI cable and mount your HDTV anywhere, without sacrificing quality

HD DIGITAL SIGNAL FOR MOVIES & GAMING– Wirelessly stream clear, 1080p HD 2D/3D video and digital audio (5.1 surround) through walls, floors & ceilings, to your HDTV or projector up to 150 ft away to watch movies, TV shows and do online gaming.

SUPPORTS HDMI DEVICES – This wireless video HDMI display kit works with TVs and projectors with an HDMI input. The device wirelessly connects to most cable, satellite, Blu-ray, set-top boxes, and other media and gaming consoles with an HDMI output.

High sensitivity: Remote control signal receiving real-time response to fast forward without delay

Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands

Easy Setup: This IR Repeater System is easy to use and sets up in minutes

★★With 1 IR distribution block,1 receiver which picks up the signal from the remote controller, the receiver is with a convenient IR confirmation LED .</br>Small and easy to hide,high sensitivity,broadband remote control.

★★Suitable for most IR control devices,such as:Amplifier,Cable box,</br>DVD Player,CD Player,Blu-ray player,Stereo receiver ,Satellite TV receiver and so on.PLEASE NOTE, DOES NOT WORK WITH: Cisco RNG150 RNG150N & RNG250 & Marantz devices.

★★With 6 emitters which is used to send the signals to the A/V components,Kit controls up to 8 devices - Expandable to 12 devices (Additional IR emitters sold separately)

Works with Harmony Remotes

Supports all 51 PS3 commands

BlueTooth wireless link

【Wireless Transmission Signal】Wireless HDMI transmitter and receiver We uses the 5.8G wireless high speed transmission signal,get faster transmission speed and stronger anti-interference ability, The use of external dual-gain antenna can be transmitted over long distance, the distance of the open transmission can reach 656 ft.

【Wireless Transmission & IR Remote Control】This Wireless HDMI extender can be used to control source A/V devices by simply pointing the remote control at the IR transmitter included with the device. Setup is quick and easy as there are no complicated cables or wires to run and no software to install.

【Low latency & Loop Out】This extender transmits lossless signals and may have a transmission delay of 0.01 seconds, which depends on the signal quality; it is great for movies, TV, videos, and presentations, and may not be suitable for games；Additional HDMI Output on the Transmitter end allows you to add a local Display for Monitoring, local display has no delay at all.

CRYSTAL-CLEAR PICTURE: Dont compromise on picture quality. This VGA over CAT5 / CAT6 extender enables you to enjoy a crisp, clear picture with support for resolutions up to 1920x1200 (at 150 ft.) and 1280x1024 (at 250 ft.)

PLUG-AND-PLAY: For easy installation, this VGA to CAT5 extender is designed to be a purely hardware solution, enabling you to cast video over RJ45 ethernet without the need of additional software or drivers

BUNDLED KIT: Conveniently this video extender comes in a bundled kit with a local (VGA over CAT5 transmitter), and a remote unit (VGA over CAT5 receiver), as well as a VGA cable and mounting brackets

【𝐀𝐮𝐝𝐢𝐨 𝐑𝐞𝐭𝐮𝐫𝐧 𝐂𝐡𝐚𝐧𝐧𝐞𝐥】Audio DIP switch control on receiver: ARC & S/PDIF allows ARC function or Audio pass through accordingly. Fully supports audio formats in HDMI ARC & S/PDIF specification, DD/DTS 5.1CH and PCM 2.0 via ARC or S/PDIF.

【𝐇𝐃𝐁𝐚𝐞𝐬𝐓 𝟐.𝟎 & 𝐇𝐃𝐌𝐈𝟐.𝟎】Signals without degradation. HDMI Extender Supports 4K@60Hz 4:4:4 8-bit and 4K@60Hz 4:2:2 10/12-bit and 4K@60Hz 4:2:0 10/12-bit up to 40m(130ft) or 1080p up tp 70m(230ft) over Cat5e/6/7 cable. HDCP2.2 compliant and with 18Gbps bandwidth can supports HDR10.

【𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐏𝐨𝐄/𝐂𝐄𝐂/𝐈𝐑 & 𝐑𝐒-𝟐𝟑𝟐 𝐞𝐱𝐭𝐞𝐧𝐬𝐢𝐨𝐧】Bi-directional POWER OVER ETHERNET (PoE) - Allows one power adapter to power both the transmitter and receiver. Bi-directional IR Extends IR signal from receiver to transmitter or from transmitter to receiver. CEC (Consumer Electronics Control) and RS232 pass-through.

Long Distance with Zero Latency: USB extender transmits signals up to 60m/196ft over a single Cat 5e/6/6a/7 cable, achieved stable work with zero latency.

Remote Peripheral Control: Connects up to 4x USB device to your PC remotely, High-speed USB2.0(480Mbps), like a mouse, keyboard, camera, space telescope, game controller, etc.

One-Way PoC: Only one power supply is required at the transmitter side to power both units. It offers you more convenience on installation at the USB peripheral side, like a USB camera.

WORKS ONLY w/CABLE Set Top Boxes (STB). Please check your device to be sure you have an active 3.5 mini input port labeled "IR IN". Contact us if you have any questions about compatibility before you buy.

20-25 ft range from remote control to IR receiver. High Immunity to ambient light and noise

Highly Reliable with high sensitivity for wide range. Works great with our INT-422 Remote

This Infrared Repeater Cable applies to all remote control devices from 38 to 56 khz

IR Repeater Extension controls Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls

Come with adhesive backing sticks directly onto different devices

4-PORT EXTENDER/SPLITTER: The 4-Port HDMI over Cat5/Cat6 Extender & Splitter works with Tripp Lite B126-Series remote receivers to split a single HDMI audio/video signal into five separate signals—one local and four remote. It is ideal for digital signs, trade shows, presentations and retail settings.

EXTENDS HDMI OVER CAT5/CAT6: When used with Tripp Lite’s B126-1A0 or B126-1A0-WP-1 active remote receivers, the Extender/Splitter can extend a 1080i (60 Hz) signal up to 200 ft. Can daisy-chain up to 3 units to extend signal to 13 monitors.

TRANSMITTER WITH VIDEO & AUDIO: Supports high-definition video resolutions up to 1080p (60 Hz). In addition to crystal-clear video, the B126-004 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio.

【1080P HDMI Extender】-- This HDMI extender supports 1080P HD, HD Audio, 3D; It extends HDMI 1080P AV signal to at least 190ft/60m via single cat6 or higher level cables following standard IEEE-568B, For better performance, we suggest to use cable longer than 45ft/15m

【HDMI Lossless transmission】-- It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection,Adjust the specification automatically for different cable lengths 1-60m to achieve the best display

【Pure Hardware Transmission】-- It is pure hardware design,No driver needed, plug and play. Adopt full HD transmission technology to make the video image more vivid

IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV

Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors

Place the IR emitter blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting

Allows you to control your audio/video equipment with your infrared remote from another room.

Simple five minute installation; just plug it into an A/C wall outlet in both rooms and you're done.

Transmits up to 100 feet, even through walls

-This IR Repeater Kit Allows You to Control A/V component by the Existing IR Controller, Control the IR Devices Between Two Rooms Such as Adjusting the Volume or Changing TV Channel.

-With 1 Receiver Picks up the Signal from the Remote Controller, the Receiver is with a Convenient IR Confirmation LED

-With 4 emitters send the Signal to the A/V Components

Extender the VGA signal 60 meters by a CAT-6 cable

Follow the standard of IEEE-568B;

Use CAT-6 replaces VGA wire,extend VGA image up to 60m/200 ft.

Forward infrared signals to operate electronic components behind closed Doors

Allows for control of devices behind closed Doors

Includes emitters to control up to four devices

✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters away (656 feet), depending on surrounding obstructions. 2 power adapters included.

✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

✅ INSTANT TRANSMISSION: Highly sensitive modules provide real-time signal transmission without delay; built-in LED indicator illuminates when the signal is received for easy status recognition

Infrared HDMI IR Extender can control your IR remote controlled devices in closet or in other rooms.

This IR Repeater supports IR frequency from 20 kHz to 60 kHz which covers nearly all the devices.

Power Free. No Power Adapter Necessary (Uses power over HDMI Cable from HDMI source unit)