Best Siig Remote Control Extenders in 2026

✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters away (656 feet), depending on surrounding obstructions. 2 power adapters included.

✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

✅ INSTANT TRANSMISSION: Highly sensitive modules provide real-time signal transmission without delay; built-in LED indicator illuminates when the signal is received for easy status recognition

✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters(656 feet) away(line-of-sight), depending on surrounding obstructions.

✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

✅ HIGH PERFORMANCE IR electronics provide real time signal transmission without delay ; Features Click Lock ID button pairing the transmitter and receiver, preventing interference from other devices.

INCREASE YOUR VIEWING RANGE: Transmitter and Receiver wirelessly sends HDMI A/V signals up to 165 feet through line-of-sight environments; works with most HDMI-equipped devices, including blu-ray players, set-top boxes, AV receivers, cable/satellite boxes, and computer systems.

UNCOMPROMISED VIDEO QUALITY: Supports vivid, high-definition videos up 1080p @60Hz. Compatible with HDMI 1.3 and HDCP 1.2 (High-bandwidth Digital Content Protection); best used for TV/video applications rather than computers or real-time applications; Note: A delay of less than 0.5 seconds might occur due to data compression- Not recommended using for PC gaming.

EASY TO USE: PLUG&PLAY. No complicated cable or wire installation needed so setup is quck and easy and the wall-mountable metal housing provides multiple placement options for the best signal broadcast or reception angles. NOTE: Do NOT install multiple kits in the same location as this may cause signal interference.

✅ HDMI EXTENDER OVER IP: With a single Cat6 cable, you can easily extend HDMI audio/video signals up to 394ft. Connect your HDMI source device (PC, Blu-ray player, media player) to the Transmitter, utilize the existing Ethernet in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver, Note: This kit comes with one Transmitter and one Receiver.

✅ 4K RESOLUTION: Supports up to 4K@30Hz and 1080p. HDMI 1.4 and HDCP 2.2 compliant. Supports 2-channel Stereo Audio. Auto adjustment for different cable lengths to produce the best video/audio experience. We recommend using high-performance pure copper Cat6 cables to ensure reliable performance. Note: Good quality Cat cables are essential in delivering quality content. Cat6/7 is recommended over Cat5e.

✅ NETWORK DISTRIBUTION: Direct 1-to-1 connection, 1-to-many through unmanaged Gigabit network switches, or many-to-many via VLAN through a Smart Ethernet Switch. With HDBitT transport protocol, connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays.

Receiver (RX) only: box for the hdbittext extender kit. Works with HDMI 2. 0 4K 60Hz hdbitt over Cat6 extender kit (part # ce-h24911-s1) This receiver box adds an additional HDMI display to a single transmitter within your network; This package is equipped with a receiver box, IR cable, power adapter and user’s guide

Over IP network distribution: direct point-to-point connection or 1-to-multiple connection through dedicated Gigabit network Routers or switch. You can connect up to 30 receivers per transmitter to not only extend but split HDMI signals to multiple displays to create a scalable HDMI extender Splitter.

Hdmi 2. 0 4K 60Hz resolution: delivers crystal clear video content at 4kx2k @30/60Hz/ 1080p@60hz. Compliant with HDMI 2. 0 and HDCP 2. 2 and supports 2-ch PCM stereo Audio

✅ Advanced ipcolor Transmission Technology - ipcolor is a global leading innovative technology for ultra high definition video digital transmission and connectivity, it can extend and transmit uncompressed 4K@60Hz YUV 4:4:4 video + audio, including HDR, with zero latency

✅ Daisy Chain Extension - Supports daisy chain connection of up to 10 transceivers to further extend HDMI signal up to 165ft to each transceiver Note: Requires ipcolor 4K HDMI 2.0 Extender Daisy Chain Transmission Kit, part# CE-H26M11-S1, sold separately Audio Extraction - Extracts and routes digital audio from the HDMI signal through the transceiver's digital Toslink port, supports PCM, Dolby 5.1, DTS 5.1 audio output signal

✅ ARC - Connects through the Toslink optical port of the transceiver to the display's ARC sink IR Control - Built-in bi-directional IR provides full remote control capabilities, control the HDMI source device at the remote display location and vice versa, IR blaster and receiver cables included

✅ HDMI Extender Kit Over IP - Using a single Cat6/7 cable, you can extend HDMI signals up to 394ft (120 meters) to a distant display with CE-H26T11-S1. Full HD 1080p @60Hz HDMI audio (2 channels) and video signal can be easily extended via CAT6 cable while maintaining signal strength and quality. Direct 1-to-1 connection or 1-to-many through Gigabyte network switches

✅ Over IP Network Distribution - 1-to-many connection through dedicated Gigabit network switches (IGMP supported switches recommended). You can connect up to 30 receivers per transmitter to not only extend, but split HDMI signals to multiple displays to create a scalable HDMI extender splitter. Supplementary receivers (CE-H26U11-S1) are ready for purchase separately. Check the comparison table below for the direct Amazon purchase link

✅ Wide Range Applications - Connect your HDMI source device (PC, Xbox, PS4/ 5, Blu-ray player, Cable Box, Chromecast with Google TV, Roku Box, Survallience system NVR, DVR, and more) to the Transmitter, utilize existing Ethernet structure in your house/ office/ church/ school/ shop to extend to the Receiver which connected to your HDTV, display or monitor at a remote location via CAT6 cable. Save your budget on HDMI signal boosters with expensive HDMI cables

✅ Extend HDMI Signals - This device extends HDMI audio & video signals over one cost effective Cat6/7 networking cable from Blu-ray players, gaming consoles, or HDMI port enabled computers. It's ideal for home theater, church services, conference room or other A/V applications which require remote location setup.

✅ Resolution & Distance - This extender supports video resolutions up to Ultra HD 4K 60Hz YUV 4:4:4 near zero latency up to 230ft (70 meters), as well as HDR 10, HDCP 2.2. Maximum data trasfer rate is up to 18GBps.

✅ HDMI Loop-Out - There is one additional HDMI output located on the Transmitter to allow user to connect to a local display for video monitoring.

✅ HDMI EXTENDER KIT OVER CAT6: Full HD 1080p @60Hz HDMI audio and video signal up to 394ft (120m) over economical CAT6 cable while maintaining signal strength and quality. Connect your HDMI source device (PC, Xbox One X/PS4 Pro, Blu-ray player, media player) to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with your own HDMI cable.

✅ FULL HD RESOLUTION: Delivers crystal clear video content at 480p / 720p / 1080i / 1080p@60Hz. Supports 2-Ch PCM stereo audio.

✅ OVER IP NETWORK DISTRIBUTION: Direct Point-to-Point connection or 1-to-Multiple Connection through unmanaged Gigabit network routers or switch. You can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays to create a scalable HDMI extender splitter. Receiver for Extender Kit (part # CE-H24B11-S1 or ASIN B07K38W66K).

✅ ULTRA-HIGH DEFINITION: Transmit high-quality audio and video up to 164ft with our 4K HDMI extender over Cat6. It supports HDCP 2.2, 5.1 channel audio, and auto downscaling for seamless device compatibility.

✅ EXTENDED RANGE: Extends HDMI signals up to 164 ft (50 meters) via Cat6/7 networking cable, making it ideal for home theater, conference room, or other audio/video applications that require remote location setup.

✅ Loop-Out Function and IR Passthrough: Our HDMI extender features a loop-out function that allows you to mirror your screen to an extended display. The IR passthrough feature enables remote control of your devices, making it perfect for home theater setups and professional installations.

✅ FLEXIBLE HDMI EXTENDER - Supports 1-to-1, 1-to-Many, or Many-to-Many connection for multiple HDMI video sources broadcasting over UTP CAT5e/6 cable up to 395ft (120M) at 1080p 60Hz. Perfect for church services, sports bars, exhibitions, or advanced home theater setups.

✅ SCALABLE RX/TX MATRIX: Allows up to 256 RX & TX combined units (limited to 100 input to infinite output) over a dedicated IP network. Additional Transmitter units (part# CE-H23B11-S2) and Receiver units (part# CE-H23C11-S2) are sold separately. Note: Dedicated IGMP Gigabit Switch is recommended for best performance and reliability

✅ DIFFERENT SWITCH FUNCTION: Able to switch to different sources from the receiver side with push buttons, IR remote, or PC control software (Matrix only) control. Bi-directional RS-232: control RS-232-enabled devices at a remote location.