Best Mna Router Trim Bits in 2026

Specs: Bearing Dia. 5/8", Number of Cutters 4, Overall Dia. 1-1/8", Overall Length 2-3/16", Shank Dia. 1/4", Carbide Height 1/2", Radius 1/4"

Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts

Most feature Freud's unique Quadra-Cut design for flawless finishes

✅ 𝐓𝐡𝐞 𝐁𝐞𝐬𝐭 𝐂𝐍𝐂 𝐑𝐨𝐮𝐭𝐞𝐫 𝐁𝐢𝐭𝐬 𝐒𝐭𝐚𝐫𝐭𝐞𝐫 𝐒𝐞𝐭 - Confused about choosing the best CNC router bits?For those new to CNC routers, IDC Woodcraft offers the ideal CNC router bits tool kit for carving wood. With these high-quality carbide bits, you'll be on the right track from the start. These bits are made of tungsten carbide steel and are built to last. This American-made set is intended to cover almost any type of CNC project you may design.

✅ 𝐂𝐨𝐦𝐩𝐥𝐞𝐭𝐞 𝐑𝐨𝐮𝐭𝐞𝐫 𝐁𝐢𝐭𝐬 𝐒𝐞𝐭 𝐓𝐨 𝐂𝐨𝐯𝐞𝐫 𝟗𝟗% 𝐎𝐟 𝐘𝐨𝐮𝐫 𝐏𝐫𝐨𝐣𝐞𝐜𝐭𝐬 - Designed to be the workhorse of your cnc wood carving jounery, our bits kit is equipped 90°/60°/30° v-bits, 1/4″, 1/8″ & 1/16" downcut end mills, an 1/8" up-cut 'drilling' endmill, 1/4" & 1/8" ball nose endmills, & 1" surfacing bit and 2 collets. Includes a 2nd bonus 1/8” downcutting endmill bit, making this a 13-piece set.

✅ 𝐎𝐮𝐭𝐬𝐭𝐚𝐧𝐝𝐢𝐧𝐠 𝐖𝐨𝐨𝐝 𝐂𝐚𝐫𝐯𝐢𝐧𝐠 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞 - From elegant cuts & delicate carves, to cool 3D carvings and angled inlays, these bits are designed to deliver it. Use30, 60, and 90-degree v-bits with blade-style edges to create super-clean cuts in groove carving. Ball-nose end mills are used for beautiful accent work and 3D carving. The spiral cutting edges of downcut router bits and up cut end mills give extremely clean finish cuts.

Specs: Cut Depth 5/16", 3/8", 7/16", 1/2", Number of Cutters 2, Overall Dia. 1-3/8", Overall Length 2-1/4", Shank Dia. 1/2", Carbide Height 1/2"

Each set includes interchangeable bearings and a wrench to cut multiple depths with a single bit

Great for furniture makers, cabinetmakers and carpenters

Specs: Number of Cutters 2, Overall Dia. 1-1/2", Overall Length 3", Shank Dia. 1/2", Carbide Height 1-1/4"

Freud Tico Hi-Density Carbide

Clean cuts in solid wood, plywood and composites

Specs: Number of Cutters 2, Overall Dia. 3/4", Overall Length 2-3/32", Shank Dia. 1/2", Carbide Height 3/8"

Down shear design on most bits for clean top surfaces

Deep center gullets for fast chip removal

Specs: Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1/2", Overall Length 3-5/8", Shank Dia. 1/2", Carbide Height 1-1/2"

Cuts all composition materials, plywoods, hardwoods, and softwoods

Use on hand-held or table-mounted routers

(D) diameter: 1/8

(R) radius: 1/16

(A°) angle: 3.6°

DURABLE – Multipurpose wood router bit set – delivers precision and durability

MULTI-PURPOSE – Varied 15-bit set – use for finishing in a wide range of applications

VERSATILE – bits are designed for processing soft and hard wood as well as wood composites

Specs: Bearing Dia. 1/2", Large Radius 1/4", Number of Cutters 4, Overall Dia. 1-1/2", Overall Length 2-1/2", Shank Dia. 1/2", Small Radius 5/32", Carbide Height 5/8"

Complete selection of decorative profiles for any project

Most feature Freud's unique Quadra-Cut design

Whiteside Router Bits are made with Premium Carbide

Precision ground for proper balance at high RPM

Industrial Quality

Specs: Angle 45°, Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1-11/32", Overall Length 2-3/16", Shank Dia. 1/4", Carbide Height 1/2"

Chamfer size easily adjusts by changing the height of the bit or moving the fence

Cuts all composition materials, plywood, hardwood, and softwood

Specs: Number of Cutters 2, Overall Dia. 3/4", Overall Length 2", Shank Dia. 1/4", Carbide Height 7/16", Radius 3/8"

Makes beautiful engraved flutes in doors, drawer fronts and molding

Ideal bits for sign lettering

🔧 KOWOOD 35 pcs set is a common variety to cover most woodwork needs

🔧 C2 Carbide for clean and accurate trimming, edging, grooving for all type of wood material

🔧 This 35 pcs set is the most cost-effective sets. Ideal budget for beginner

Add a beveled edge to surface edges or create accurate miter joints

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

For use on table mount and handheld router

▲ DURABLE STEEL BODY - Boasting alloy blade, balanced craftsmanship and a solid hardened steel board these woodworking tools can withstand some heavy duty use and the test of time. Their clever anti kickback design ensures safe installation

▲ USE OF SAFE - The 1/4 inch shank bits provide greater stability and less vibration during use. Clamping to at least the “K” line, the short clamping of this product might cause bend

▲ WIDELY APPLICATIONS - These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. ▲DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc▲

3 WINGS WOOD CNC ROUTER BIT: Shank: 1/2"; Cut Diameter: 2"; Cut Length: 1/2"

HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time.

VERSATILE WOODWORKING TOOlS: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!

This round over router bit has a 1/4" radius and 1/4" cutting depth. The shank is 1/4" in diameter.

Add a round over edge to a variety of surface edges and projects or create small moldings to be used on its own or as part of a molding build-up

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

KIT INCLUDES: 2 x Flush Trim Bits (1/4", 1/2"), 1 x Dovetail Bit (1/2“), 1 x Hinge Mortising Bit (1/2“), 3 x Straight Bits (1/4“, 3/8“, 1/2“), 2 x 45 Degree Chamfer Bits (1/2“, 5/8”), 3 x Roundover Bits w/ Bearing (1/4", 3/8", 1/2"), 2 x Rabbeting Bits (1/4", 1/2"), 1 x Roman Ogee Bit (5/32”)

BONUS PARTS: A hex key is included to help with tool adjustments, along with two bearings (3/8" and 1/2")

ORGANIZATION: These bits are stored in a sturdy plastic portable container. It has individually labeled sections, so you don’t have to struggle to find the right place for your bits at the end of a difficult workday

Flush trim templates and patterns for a wide variety of projects

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

For use on table mount and handheld router

Specs: Number of Cutters 2, Overall Dia. 1/2", Overall Length 2-1/8", Shank Dia. 1/4", Carbide Height 1"

Freud Tico Hi-Density Carbide

Clean cuts in solid wood, plywood and composites

SKIL 30-piece router bit set includes several edge-forming, surface-forming, straight and joinery bits

Carbide tips provide long-lasting cutting edges for durability

Control cut design helps minimize kick-back to prevent injuries during operation

ROUTER BITS FOR WOODWORKING - This router bit set comes with all the accessories you will need for your woodworking project, including various sizes of straight, dovetail, cove, panel pilot, mortising, combination bevel, and roundover router bits.

MULTIFUNCTIONAL ROUTER BITS - This wood working tools set also includes router bits for more intricate projects, including 90-degree V-groove, round nose, trimming, 45-degree chamfer, flush trim, Roman Ogee, slot cutter, and rabbeting wood router bits.

DURABLE CONSTRUCTION - Constructed from high-quality materials, these carbide-tipped woodworking router bits have a 0.25-inch shank and are built to last. This durable set will allow you to complete all your projects, no matter your experience level.

1/4" shank top bearing flush trim router bit, cutting diameter: 1/4",5/16",3/8",1/2".

Industrial Grade Carbide Cutters, good quality for long service life.

Precision ground, creating smooth cutting surface.

✅ Flush Trim Router Bits Set Cutting Dia. - 13/16",1-1/16",1-3/16",1-7/32".

✅ How to Use - Choose a template timber, use the double side tape the piece and the template together, trace the template shape out on the project with a pencil, and then use the top bearing flush trimming bit to clean up the extra material, finally use a putty knife to remove the template.

✅ High Quality - C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. Heat resistant Teflon coating. When using the Router Bit, avoid collision between the alloy blade and the hard surface (cement floor or metal surface)!

Micro-grain tungsten carbide cutters provide superior wear resistance and long life

Can be used without the bearing as a standard straight bit, Great for combined plunge-cutting and pattern/template routing

For increased work piece visibility, use shank bearing flush trim bit in a handheld router allowing the template to be positioned on top of the work piece

Industrial Quality Router Bits

Create detailed moldings and casings to add to a variety of applications

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

Shank Diameter: 1/4", Cutting Diameter: 3/4"; Cutting Length: 1/4", Total Length: 2"

C3 Micro-grain Tungsten Carbide Cutters, Solid Hardened Steel Bodies with Anti-Kickback Design

Cleaning Bottom Router Bit will rout clean cutouts for hinges or other shallow cutout projects.

UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

KOWOOD Pro flush trim router bit is designed specifically for professional trimming work

This flush trim router bit features 20 individually brazed carbide tips in a compression design in order to eliminate chipping

Multi blade technology can effectively improve work efficiency and tool life

Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length

PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time.

The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.