Best Dbparts Screw Terminals in 2026

PARAMETER-----10 stainless steel #8 terminal screws,3*1/4" studs.

WHAT YOU GET-----Cover attaches with nylon nuts to the two outside studs to protect against accidental short circuits. Come with 1/4” and #8 suitable insulated ring terminals.No need to find the small rings anymore.

RANGE FOR USE---- Max voltage: 48VDC. Max continuous amperage: 150ADC. Max intermittent: 20 A per connection (less than 1 minute).

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

★【What You Get:】In this terminal block set, it include 5pcs 3 positions double row screw terminal strip blocks with cover, 5pcs black and red pre-insulated barrier jumper strips, 60pcs insulated fork wire connectors. Total 70pcs are well packed in a bag.

★【High Quality:】The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance (transparent dust cover is not flame retardant). High-quality brass guide, excellent electrical conductivity, the appearance of nickel-plated, rust and durable.

★【Product Feature:】The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite; Also include a clear cover to protect accidental touching of the terminal. Transparent cover, clear and intuitive internal components, allows for visual inspection of insert terminals.

★ Product ★ - A pair of 12V power distribution block, includes a red positive power distribution block and a black negative power distribution block.

★ 250A Rating ★ - The battery distribution block rated 250A when work in 12v circuit, and the battery terminal block can handle MAX 48V.

★ 5/16" Stud Terminal ★ - The battery bus bar terminal block includes 4 x 5/16" studs terminal and 3 x #8 screw terminals, which makes the 12V junction block able to accept large size terminal connectors and wires.

★ Product ★ - A pair of 12V power distribution block, includes a red positive power distribution block and a black negative power distribution block.

★ 250A Rating ★ - The battery distribution block rated 250A when work in 12v circuit, and the battery terminal block can handle MAX 48V.

★ 3/8" Stud Terminal ★ - The battery bus bar terminal block includes 4 x 3/8" studs terminal and 3 x #8 screw terminals, which makes the 12V junction block able to accept large size terminal connectors and wires.

FANTASTIC DESIGN: 2 position, 3 position will be sold together. two row, 600V 36A, terminal block.

GREAT SIZE: 21 x 21 x 21 mm/0.83 x 0.83 x 0.83 inch, 33 x 21 x 21 mm/1.22 x 0.83 x 0.83 inch.

MODEL: H2519-2 and H2519-3. Package quantity: 5pcs.

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

Package included:30x 2 Pin Terminal Block Connector+20x 3 Pin Terminal Block Connector.

Stable performance and fine workmanship .

Pitch:5mm,convenient to connect.

15EDGRK 4-Pole terminal pitch: 3.81mm. Plug-in terminal, non-welding butt. One set: socket + wiring female head. Suitable for electrical connection, bid farewell to traditional wiring, bid farewell to dangerous, safe wiring

3.81mm 4P ground circuit terminal blocks. Rated voltage & current: 300V 8A. Wire range: 28-16AWG. They are widely used in electronics,communication equipment,instruments,computers,automatic control systems and alarm equipment,etc

3.81mm phoenix connector, anti-vibration design to ensure the long-term airtight connection, low control signal loss, high switching frequency, no mechanical contact jitter, not affected by position and long service life

Terminal Pitch:15EDG 3.81mm plug-in terminal block

Pin Number: 3，Rated Value: 300V 8A，Wire range: 28-16AWG，Color: Green

The pluggable terminal are made of high-quality materials, which are strong and durable. The highly insulated and flame-retardant shell can be used safely and reliably

【Terminal Pitch】: 3.5mm/ 0.14inch pitch PCB terminal block connector.

【Specification】:Rated Value: AC300V, Rated Current: 8A，Withstanding voltage：AC1500V/1Min； Wiring Range: 28-16AWG

【Application】: Pluggable terminal block connector.is made of plastic and copper, handy and easy to assemble;PCB terminal is widely used in almost all electronic equipment, such as greneral computer, calculatros, small eletronic watches, communication electronics equipment etc.

Pitch: 3.81mm

Pin Number: 12

Rated Value: 300V 8A

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x 8-32 Screws with captive star lock washer, Stud terminal: 1 x 10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

Pitch: 3.81mm

Pin Number: 3

Pin Orientation: Right Angle

Pitch: 3.81mm

Pin Number: 6

Rated Value: 300V 8A

500A Bus Bar Heavy Duty Module Design Power Distribution Block：The Power Distribution Block Bus Bar Provides several large gauge connections for running a dedicated ground to the battery and offers more minor gauge connections for lower voltage, Continuous Rating Voltage Max to 500A, 4 Terminal Studs 2 Screw Terminals, 300V AC / 48V DC Nickel Plated Brass made, The power distribution block is useful for customizing vehicles or relocating batteries, Applicable to car, trucks, RVs, marine, boats and other industrial equipment.

8 detachable windows & Designed to Withstand Rain and Dust: The power distribution block designed to withstand rain and dust,resist the air and seawater erosion,The power distribution block has Removable windows for unobstructed wiring, Design of 8 detachable windows and the number of windows can be disassembled according to user needs for unobstructed wiring, with the high quality insulated rear cover, Waterproof & Dustproof.

High Quality & Reliable quality: The Bus Material of Power Distribution Block Bus Bar is built from quality Nickel Plated Brass materials for durability, engineered for reliable performance that ensures the good electric conduct,The base Material: UL94-VO Rated,Glass Reinforced Thermoplastics ensures mechanical strength and durability.

Pitch: 5.08mm; Rated Value: 20A 300V ; Wire Range: 12-24AWG

Withstanding Voltage: AC2500V/1Min; Torque: 0.4 Nm (3.5lb-In)

Stripping length: 7-8mm; Temperature range: - 40 ° C ~ + 105 ° C

Power distribution and terminal block with six terminals for a variety of electrical routing and termination applications

Glass-filled polyester block for strength and durability, with corrosion-resistant terminal plates

Voltage and current rating of 600V and 30 amp

3.81MM phoenix type connector pcb screw terminal block connector *4pcs

About the project:These Phoenix connectors are made of advanced materials. They are well made and stable with pure copper metal block.

[Specification] Terminal spacing: 3.81mm; They are heat resistant, flame retardant and current balanced to ensure no leakage. Low signal loss and high switching frequency

The Mega 2560 Prototype Screw Terminal Block Shield Board is an accessory for the Arduino Mega 2560 microcontroller that provides a convenient way to connect external wires using screw terminals.

No Welding Required: The Mega 2560 Proto Screw Shield is Pre-soldered. It can be used for prototyping and experimenting with electronic projects to connect external wires without the need for soldering.

All signal ports are clearly named and labeled on both sides of the board for quick wiring.

EASY INSTALLATION - We provide 3 kinds of terminal blocks (3/6/10 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. All our products are certified and inspected, and the quality is trustworthy

SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide jumpers to help customers distinguish positive and negative wire when installation.

RatedVoltage_V : 600V , RatedCurrent_A : 30A