Best Dbparts Screw Terminals in 2026

PARAMETER-----10 stainless steel #8 terminal screws,3*1/4" studs.

WHAT YOU GET-----Cover attaches with nylon nuts to the two outside studs to protect against accidental short circuits. Come with 1/4” and #8 suitable insulated ring terminals.No need to find the small rings anymore.

RANGE FOR USE---- Max voltage: 48VDC. Max continuous amperage: 150ADC. Max intermittent: 20 A per connection (less than 1 minute).

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal block that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

★【What You Get】 - In this terminal block set,it include 6pcs 4 positions 600V 15A double row screw terminal strip blocks with cover,6pcs 400V 15A pre-insulated barrier jumper strips,60pcs insulated fork wire connectors,1pc screwdriver.Total 73pcs packed in a bag.

★【Easy Install】 - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal.The fork terminal stripe can be cut in any position to meet with your different demand.You have the option of of making 4 individual connections or by using the whole barrier bar or part of it up to 4 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals.

★【Heavy Duty】 - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. The shell is made with flame resistant material, more safer. Copper plate conductor has good electrical conductivity and also nickel plated has a better anti-oxidation performance which make it more durable.

★【What You Get】 - In this terminal block set,it include 2pcs 4 positions/2pcs 5 positions/2pcs 6 positions 600V 15A double row screw terminal strip blocks with cover,6pcs 400V 15A pre-insulated barrier jumper strips,60pcs insulated fork wire connectors.Total 72pcs packed in a bag.

★【Easy Install】 - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal.The fork terminal stripe can be cut in any position to meet with your different demand.You have the option of of making 4/5/6 individual connections or by using the whole barrier bar or part of it up to 4/5/6 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals.

★【Heavy Duty】 - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. The shell is made with flame resistant material, more safer. Copper plate conductor has good electrical conductivity and also nickel plated has a better anti-oxidation performance which make it more durable.

★ Product ★ - A pair of 12V power distribution block, includes a red positive power distribution block and a black negative power distribution block.

★ 250A Rating ★ - The battery distribution block rated 250A when work in 12v circuit, and the battery terminal block can handle MAX 48V.

★ 5/16" Stud Terminal ★ - The battery bus bar terminal block includes 4 x 5/16" studs terminal and 3 x #8 screw terminals, which makes the 12V junction block able to accept large size terminal connectors and wires.

Features: Marine bus bar junction block 12v, these busbars will come in pairs, include one positive bus bar (red one) and one negative bus bar (black one).

Rating: Max voltage: 300V AC, 48V DC. Max continuous amperage: 130A AC, 150A DC. This battery distribution block will be suitable for both AC and DC systems.

Terminals: Each battery bus bar 12v includes - M8 (5/16") terminal studs x 4 and M4 (#8) screw terminals x 6, two power bus bars in the package - one positive bus bar and one ground bus bar.

★ Product ★ - A pair of 12V power distribution block, includes a red positive power distribution block and a black negative power distribution block.

★ 250A Rating ★ - The battery distribution block rated 250A when work in 12v circuit, and the battery terminal block can handle MAX 48V.

★ 3/8" Stud Terminal ★ - The battery bus bar terminal block includes 4 x 3/8" studs terminal and 3 x #8 screw terminals, which makes the 12V junction block able to accept large size terminal connectors and wires.

Durable material: these white terminal blocks adopt flame-retardant PP material shell, which have insulation, corrosion resistance and wear resistance; They can stand temperature between - 40 to 150 degrees Celsius, which have nice electrical conductivity

Nice performance: the plated zinc alloy screws and copper-plated zinc alloy terminals have nice stability and conductivity, which can serve you for a long time, enough quantity for you to use

Safe to use: the tightly screw can ensure reliable electrical contact, and helps prevent accidental contact with the terminal, so you can use it with confidence

【Safe and Reliable】Idong Power distribution block Selected flame-resistant material, safer than normal plastic,internal Copperplate conductor material, better conductive properties,And nickel-plated which has a long life, no corrosion, anti-aging

【Easy to use】First insert the wire into the ring terminal, then open the protective cover, and finally pass the screw through the terminal, and tighten the screw to fix the terminal. The wires will not come loose.

【Universal product】 providing maximum voltage: 300V AC, 48V DC and 130A AC, 150A DC current,Up to 10 circuits can be connected to a row. good protection for your boat, car, RV

Material: the base is made of hard plastic, the circuit board is made of copper, stainless steel terminal, PC protective sleeve, durable.

Model: Red base, M6 terminal stud x4, M4 screw terminal x 6.

Features: Maximum voltage: 300V AC, 48V DC. Maximum continuous amperage: 130A AC, 150A DC.

✿2.54mm Terminal Block: The package contains 20 x 4 pin PCB connector, rated voltage: 150V, rated current: 6A, wiring range: 24-12AWG.

✿High-Quality Material: The pin of the PCB screw terminal block is made of brass, which has good electrical conductivity. The shell of the PCB terminal block is made of plastic, flame-retardant and insulated, ensuring safety during use.

✿Wide Application Range: PCB terminal connectors are widely used in low frequency PCB wiring, 2.54mm pitch screw terminals are suitable for electronics, communication equipment, household appliances and alarm devices.

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

15EDGRK 4-Pole terminal pitch: 3.81mm. Plug-in terminal, non-welding butt. One set: socket + wiring female head. Suitable for electrical connection, bid farewell to traditional wiring, bid farewell to dangerous, safe wiring

3.81mm 4P ground circuit terminal blocks. Rated voltage & current: 300V 8A. Wire range: 28-16AWG. They are widely used in electronics,communication equipment,instruments,computers,automatic control systems and alarm equipment,etc

3.81mm phoenix connector, anti-vibration design to ensure the long-term airtight connection, low control signal loss, high switching frequency, no mechanical contact jitter, not affected by position and long service life

Product Type: TERMINAL BLOCK

Package length: 9.4 cm

Package width: 17.6 cm

✔️About the project:These Phoenix connectors are made of advanced materials. They are well made and stable with pure copper metal block and UL 94V0 fireproof plastic shell.

✔️[Specification] Terminal spacing: 5.08mm; Rated voltage: 300V 10A. They are heat resistant, flame retardant and current balanced to ensure no leakage. Low signal loss and high switching frequency

✔️[Quick and Safe Wiring] Can be installed on the 5.08mm-4PIN Phoenix connector, allowing you to easily install and replace printed circuit boards.

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x 8-32 Screws with captive star lock washer, Stud terminal: 1 x 10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

Pitch: 2.54mm 0.1"

Pin Number: 4

Rated Value: 300V 10A

25Amp 240V 2x4 position terminal block distribution module. Support for multiple module extension connections. Maximum Voltage: 240V, Maximum Current Rating 25A(Single circuit branch current less than 8A).

Input terminals(+,-): pitch: 5.0mm/0.2", wire size 24~12 AWG, stripping length 8mm, Metric M3 slotted screw.

Output terminals: Pitch 5.0mm/0.2", Wire range 24AWG ~ 12AWG.

500A Bus Bar Heavy Duty Module Design Power Distribution Block：The Power Distribution Block Bus Bar Provides several large gauge connections for running a dedicated ground to the battery and offers more minor gauge connections for lower voltage, Continuous Rating Voltage Max to 500A, 4 Terminal Studs 2 Screw Terminals, 300V AC / 48V DC Nickel Plated Brass made, The power distribution block is useful for customizing vehicles or relocating batteries, Applicable to car, trucks, RVs, marine, boats and other industrial equipment.

8 detachable windows & Designed to Withstand Rain and Dust: The power distribution block designed to withstand rain and dust,resist the air and seawater erosion,The power distribution block has Removable windows for unobstructed wiring, Design of 8 detachable windows and the number of windows can be disassembled according to user needs for unobstructed wiring, with the high quality insulated rear cover, Waterproof & Dustproof.

High Quality & Reliable quality: The Bus Material of Power Distribution Block Bus Bar is built from quality Nickel Plated Brass materials for durability, engineered for reliable performance that ensures the good electric conduct,The base Material: UL94-VO Rated,Glass Reinforced Thermoplastics ensures mechanical strength and durability.

Item Package Dimensions:12.192 Cm L X4.572 Cm W X1.905 Cmh

Product Type:Terminal Block

Iten Package Weight:0.050 Pounds

Pitch: 5.08mm; Rated Value: 20A 300V ; Wire Range: 12-24AWG

Withstanding Voltage: AC2500V/1Min; Torque: 0.4 Nm (3.5lb-In)

Stripping length: 7-8mm; Temperature range: - 40 ° C ~ + 105 ° C

Power distribution and terminal block with six terminals for a variety of electrical routing and termination applications

Glass-filled polyester block for strength and durability, with corrosion-resistant terminal plates

Voltage and current rating of 600V and 30 amp

3.81MM phoenix type connector pcb screw terminal block connector *4pcs

About the project:These Phoenix connectors are made of advanced materials. They are well made and stable with pure copper metal block.

[Specification] Terminal spacing: 3.81mm; They are heat resistant, flame retardant and current balanced to ensure no leakage. Low signal loss and high switching frequency

【Electrical Test Passed】This is PLC breakout board can be mounted on DIN rail with width 15/32/35mm,Suitable for PLC and DIN rail mount,has been assembled, and electrical test passed.

【Rated Voltage】: 48V, rated current is 1A / per pin.

【Terminal Pitch】: 2.54mm / 0.1" screw terminal block.

EASY INSTALLATION - We provide 3 kinds of terminal blocks (3/6/10 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. All our products are certified and inspected, and the quality is trustworthy

SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide jumpers to help customers distinguish positive and negative wire when installation.

RatedVoltage_V : 600V , RatedCurrent_A : 30A