Best Plastic Scroll Saws in 2026

[2 SAWS IN 1] Pivoting, push-button head turns your jigsaw into a reciprocating saw and back again in just seconds

[ORBITAL CUTTING] The slight circular motion is more efficient for most materials than the traditional back and forth stroke. Get the job done quicker, with less strain on your hands

[DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products

Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity

Variable speed goes from 400 to 1600 strokes per minute

Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts

▶2X FASTER than traditional hand saws, Japanese style triple-bevel staggered teeth(7TPI), for smoothly and sharply sawing, prevent clogging.

▶Non-Slip Rubber Handle with secure gear lock, for reducing the pressure of long-last working, NO TEETH EXPOSED when closed, compact and safe for outdoors.

▶Durable SK-5 high carbon steel blade with special technique, for efficiency cutting and prevent wood bits binding, in bushcraft survival and general garden work.

[SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

[CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts

[TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal

For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood

Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned

Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals

🚀±45⁰ Bevel Cutting & 4 Orbital Setting🚀: 45⁰ adjustment with 4 Orbital settings, fit into different angle and material cutting. More flexible and accurate for working.

🚀3000 SPM Power & 6 Various Speeds🚀:Powerful 4.5 Amp motor of jigsaw tool generates up to 3,000 spm of cutting power needed for the most materials. 6-bit variable speed allows you to control the cutting speed and accuracy, and handle various applications and materials with higher accuracy.

🚀Tool-free Blade Change & Dust Extraction🚀: Replace saw blades in a matter of seconds with the tool-free blade Clamp. This jig saw kit options to connect with vacuum cleaner. Clear sawdust by using the dust blower or connecting the dust port to a vacuum cleaner for clear sight of cutting line and neat working environment.

[GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts

[TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site

[ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, Carbon and Aluminum arrow shafts, and mini model making

High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel- no sanding required!

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, arrow shafts, and mini model making

While this mini table saw bring your hope to the reality. Unibody 3mm thich steel frame and aluminum alloy panel with 775 type high torque motor which maximum rotating speed up to 7000RPM providing ultra strong cutting power but low noise.

The cutting table is quipped with ruler, baffle meeting your accure cutting needs and safety.

Come along with B12 drill chuck with 0.6-12mm clamping capacity can be used as the electric polisher or drill when install the corresponding pars.

✅RUSTPROOF AND DURABLE --- This product is an emergency wire saw, Mini stainless steel wire saw is made of quality stainless steel, which is anti-rust and durable.

✅RUSTPROOF AND DURABLE --- This product is an emergency wire saw, Mini stainless steel wire saw is made of quality stainless steel, which is anti-rust and durable.

✅EASY TO OPERATE --- With a chain saw and two ring handles, can easily cut object by holding the two handles and pull the saw forth and back.

GOOD STRENGTH HARDNESS: Saw teeth made of high quality material, it is good strength hardness and elasticity, which is portable survival chainsaw.

EASY TO OPERATE: With a chain saw and two ring handles, can easily cut object by holding the two handles and pull the saw forth and back.

MULTIPUL USE: It is suitable for sawing wood in both directions. Sawtooth is sharp, can saw wood, plastic, bone, rubber, soft gold and other materials, folding chain saw, which has long service life, and easy to carry.

Product 1: Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity

Product 1: Variable speed goes from 400 to 1600 strokes per minute

Product 1: Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts

This Mini Table Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, wood, plastic and other light materials.

This Benchtop Cut Off Miter Saw has adjustable miter gauge, perfect for all your DIY projects.

This precision bench saw makes perfect cuts in soft metals, wood and plastic in 1/10th the time it takes by hand.

【Adjustable Cut Depth】The height of the saw blade from the table top is adjustable, with a range of 0-0.59 inch. And this small table saw with a cut depth of 0-1/2 inch. We provide 4 commonly used circular saw blades, which can meet your basic cutting needs!

【Application】Suitable for PCB, Small wooden stick, Acrylic, Thin wood, Plastic, Model material cutting, Aluminum alloy, Iron and Stainless steel cutting, etc. With this small table saw you can easily make some small crafts, small woodworking projects!

【Convenient】It is a very tiny table saw, please check the machine size in the third picture (L x W x H) 7x5.5x3", weight 4.2 lbs, compact size, easy to carry and small space. Equipped with a transparent safety baffle, does not block your sight. It can perform 90° right-angle cutting and 45° bevel cutting.

POWERFUL 2.8 AMP INDUCTION MOTOR—Rip through a variety of wood materials with the 2.8 amp induction motor

2-SPEED DRIVE SYSTEM—Allows tool-free belt tensioning

QUICK BLADE TENSION SETTING—Set blade tension quickly and accurately for clean cuts

Beveling Table - Offers the ability to cut at angles from 0-45-degrees with the table tilt mechanism. The table lock knob and tilt scale are used to tilt the table for horizontal angle cuts

Variable Speed - Variable speed can be adjusted anywhere from 400 to 1650 strokes per minute with the simple turn of a knob

Blade Variety - Whether your preference is pinned or pinless blades, the XtremepowerUS 16-inch Variable Speed Scroll Saw handles them both

Product 1: [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

Product 1: [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts

Product 1: [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal

4" Mini Table Saw :With High-Quality Permanent-Magnet Dc Motor, Large Torque, Higher Rotation Speed With The Maximum Could Be Up To 5000rpm, Long Service Life, And Could Be Equipped With The Alloy Blade And Diamond Saw Web

Cut Through The Nonferrous Materials, Like Copper, Aluminum, As Well As The Nonmetallic Materials, Like Stone, Wood, Glass And Plastic, And So On.

LxWxH :190MM(7.5")x 142MM(5.5“) x 155MM(6"),Tiny Volume, Mini Table Saw, Suitable For The Small Projects Making In Home Or Workshop.

【ADJUSTABLE CUT DEPTH】The height of the saw blade from the table top is adjustable, with a range of 0-0.55 inch. And this small table saw with a cut depth of 0-1/2 inch. We provide 3 commonly used circular saw blades, which can meet your basic cutting needs!

【APPLICATION】This mini hobby table saw is suitable for cutting DIY handicrafts, PCB board, basswood board, Plastic, Copper Clad Laminate, Acrylic, Thin wood board, Bamboo slice, wood chips, Chopsticks, small wooden sticks, etc. With this small portable table saw you can easily make some small crafts, small woodworking projects!

【PORTABLE】It is a very tiny table saw, please check the machine size in the second picture (L x W x H) 7.9x6.3x3.1", weight 5.5 lbs, compact size, easy to carry and small space. Equipped with a transparent safety baffle, does not block your sight. It can perform 90° right-angle cutting and 45° bevel cutting.

Rustproof and Durable: This is an emergency wire saw made of high-quality stainless steel, which is rustproof and durable.

Easy Cutting: Using a chain saw and two circular handles, you can easily cut objects by holding the two handles and pulling the saw back and forth.

Applicable Materials: Can be used to cut wood, plastic, bones, rubber and soft metals.

ANTI RUST AND DURABLE: This emergency wire saw adopts anti rust and durable.stainless steel. Could use vegetable oil for maintenance.

FINGER HOLES FOR EASY HANDLING: This outdoor survival wire with finger holes for easy handling can easily cut object by holding the holes.

WIDE APPLICATION: Can be used for cutting wood, plastic, bone, rubber and soft metal. Easily cuts down small trees or branches

[High-quality materials] This product is an emergency wire saw, made of high-quality stainless steel, rust-proof and durable, and has a long service life.

[Simple to use] This stainless steel wire saw has a chain saw and two ring handles. When using it, you can easily cut objects by holding the two handles and pulling the saw back and forth.

[Has many uses] This stainless steel wire saw has sharp teeth and can be used to cut wood, plastic, bone, rubber and soft metals.

14" RESAW CAPACITY: For cutting large pieces of wood, slicing veneers, and cutting book matched panels.

21-1/2"x16" CAST IRON TABLE: Added stability and work support.

4-SIDED GUIDE POST WITH RACK AND PINION ADJUSTMENT: Optimum blade support.

Powerful motor delivers fast, high speed up to 6000rpm/min, 16mm cutting depth, for efficient, easy cutting job.

0°-90° cutting angle adjustable, 7 rotating speeds adjustment, benefit to achieve precise and quick cut.

Backer and scale of tablesaw, used for safe, stable, accurate and straight cuts.

[Specifications] Equipped with high-speed motors. Motor speed: 10000RPM. Output speed: 1600-3300RPM. Stepless speed regulation power supply. Maximum diameter of saw blade: 110MM. Cutting depth: 30MM. Chuck range: 1.5-10MM. Flexible shaft chuck range: 0.3-4MM.

[Multifunctional] The three processing methods of cutting, engraving and polishing are combined, effective and easy to use. The package contains all the accessories in the picture!The English manual is in the last picture of lisiting, please contact our Amazon mailbox if you can’t read it clearly.

[High precision] In order to accommodate the different inner holes of the saw blade, the diameter of one side of the saw blade clamp is 0.79 inches, and the diameter of the other side is 0.63 inches. The jade cutting, engraving and polishing machine is equipped with a precise angle ruler and length measuring ruler. The operator can operate the machine according to the size requirements, and can clearly grasp the processing size.

Impeccable Cutting Proficiency: Are you ready to cut into an unbelievable experience? The woodworking bandsaw can cut wood with a maximum cutting height of 6 inches. Max. Throat Width: 9.65 in / 245 mm, Sawblade Length: 72.13 in / 1832 mm, Max.Sawblade Speed: 890 m/min±10%.

Two-speed Adjustable: The benchtop band saw comes with a high-performance motor that can deliver a powerful 1/2 HP 370W output while providing overheat protection for added security. The benchtop band saw features an 1100 RPM maximum speed and 560 RPM minimum speed, accommodating their specific needs.

Multi-angle Cutting: The wood bandsaw features a tilting table that can be adjusted from 0 to 45°, allowing for more flexibility when cutting. The sawtable size is 13.39 x 13.19 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease.