Best Traxxas Servos in 2026

Includes 5 pieces of cables.

Y Servo Leads are durable, soft and light

10cm lenght.

Ultra Fast / Extremely Strong / Unbelievably Precise!

Metal Gears / Full Ball Bearings / Shockproof

Waterproof / Digital / Brushless

2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.

The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g).

▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof

▶Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V

▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell

DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo

High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life

Copper & Aluminum / Stainless Steel & Aluminum

High quality and high cost performance.

Operating speed: 0.1second/ 60degree ( 4.8V no load)

Operating voltage: 4.8-6V

Large Torque - 20KG Servo Motor 20.5kg·cm (284.7oz·in) -22.8kg·cm (316.63oz·in)

High Rotation Support Waterproof- 270 degree rotation. Well controlled from 0 to 270 degrees, and support waterproof.

High Precision - Using dual ball bearings design and advanced potentiometer to make sure the high linearity and accuracy of the servo

WHY CHOOSE IT: This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy allincrease).This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

WIDE APPLICATIONS: The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys.

ELECTRICAL SPECIFICATION: The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A.

20kg High Torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)

Fully sealed waterproof rubber seal ring, can effectively resist moisture.

Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.

Size: 40.0*20.5*40.5mm Operating speed ( 6.8V ): 0.17 sec/60 degree Stall torque ( 6.8V ): 34.5kg/cm

Great choice for university professors and students who are interested in developing software for robot parts

High-precision metal gear with hard anodizing for better accuracy and longer service life，Water proof rubber seals screws, made of first-grade material ensure the longevity of the products

25KG servo - maximum torque can up to 25kg.cm (6.8V)

Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance

High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life

This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)

The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc.

Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear .

Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino experiments

Interface Type: compatible with JR & Futaba interface.

No Load Running Speed: 0.09±0.01 sec/60° at 4.8V Rotary Angle: 120°

SG90 9G Servo - Miuzei 9g servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.

Mini Servo - small servo motor compatible with JR & Futaba interface. Micro servo running speed (at no load) : 0.09±0.01 sec/60° (4.8V) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree.

Micro Servo Motor - Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band width: 7usec. Operating Voltage: 4.8V～6.0V.

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi

Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree

Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 ms

EMAX Original 12g Mini Metal Gear Analog Servo

Operating voltage: 4.8V~6.0V

Connector type: Futaba/JR compatible

▶New Model: DS3225MG More torque higher speed

▶Power cord is longer up to 15.75inches(40cm),and also send with a 25T adjustable metal servo arm

▶Best for your DIY Project:compatible with 1/8,1/10,1/12scale crawler,truck,buggy,robotic arm,and any application where standard servos are used

25KG high torque servo - maximum torque can up to 25kg.cm (6.8V)

Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance

High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life

Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.

This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees

MG90S Micro Servo Motor, updated SG90 serve motor.

Stall Torque: 2.0kg/cm(4.8V)

Operating Speed: 0.11 seconds / 60 degrees (4.8V)

Good Quality -- The servo motor is composed of a sturdy middle shell, four strong steel metal gear inside, and upper and lower cooper sleeve fixation, providing better service for you.

High Precision-- Upgrade digital servo, 330HZ signal frequency,make it more precise,soft more smooth when on,off,accelerate and decelerate.

Well Protection-- This RC servo has IP66 waterproof dustproof performance.The output torque exceeds the overload torque, lasts 10S, and the electric current over 2.5A, the steering gear will automatically stop, The overload torque can be modified.

The torque of M45CHW high torque servo is up to 35kg/cm at 6V and 45kg/cm at 8.4V. The speed is up to 0.12sec/135° at 6V and 0.11sec/135° at 8.4V

Coreless servo come with IP67 waterproof design, and the control angle is 270 degree. When your RC car cross the mountain or pass the river, waterproof design can let your car plays with the river

Featuring high precision steel gear, CNC AL6082 aluminum shell and 2BB ball bearing, which is high quality, less noise, good stability and long life

Made of high-quality materials, very wear-resistant, light weight, can not be easily damaged

Mini metal gears, can be shockproof, low noise, stable performance

Operating voltage: 4.8V-6.0V; Dimensions: 24mm*23mm*11.5 mm (0.94 x0.9 x.0.45 inches); Working speed: 0.12/0.10sec/60degree

▶270° Digital Servo: built-in brush motor and stable motherboard, precise angle without deviation.

▶Control System: change of pulse width. Pulse range 500usec ~ 2500usec for 0° ~ 270° (90°--1166usec, 180°--1833usec).

▶High Performance: high quality aluminum gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servo, two functions are added, which can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 ℃ overheat protection

100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.

Mini servo SG90 is tiny and lightweight with high output power.

SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control.

High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control.

All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy.

100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.

It is tiny and lightweight with high output power.

Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control.

Operating speed: 0.12second/ 60degree ( 4.8V no load)

Stall Torque (4.8V): 17.5oz /in (1kg/cm)

Operating voltage: 3.0V~7.2V

The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc.

This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)

Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear .

★PRODUCT FEATURES: digital steering gear, metal copper teeth, hollow cup motor, double ball bearing, light weight, low noise, precise angle

★WORKING SPEED: 0.11±0.01 second/60°(4.8V); 0.10±0.01 second/60°(6.0V)

★INTERFACE TYPE: JR, FUTABA general interface(Red wire: connect to positive; brown wire: connect to negative; yellow wire: connect to signal)