Best Dna Motoring Side Marker Assemblies in 2026

ULTRA REFLECTIVE POLYCARBONATE LENS - The amber 2" round LED side marker uses a specially designed polycarbonate lens to reflect back direct light, allowing your tractor or trailer to be more visible at night and providing a safer driving experience for you and other drivers on the road. The round LED side marker also comes with a “TOP” orientation, designed to allow you to uniformly install multiple units, while maximizing the amount of reflectiveness from each lens.

2 IN 1 FUNCTIONALITY - Driving a tractor, trailer, truck, or any other large vehicle mandates that you drive with side marker lights and reflectors depending on the size of your vehicle. The LED clearance light comes with 10 high powered LEDs, allowing it to serve as both a reflector and clearance light that federal law requires for larger trailers. This LED clearance light is also D.O.T FMVSS-108 compliant.

STUNNING 180° VISIBILITY - Each amber 2" round LED clearance light comes with a protruded light for increased visibility. When you place the clearance light on the side or the back of your tractor or trailer, the clearance light provides 180° of visibility, alerting other drivers to your presence.  The specially designed clearance light is designed using textured edges that help disperse the light at a wider angle in comparison to lights that are flush with their grommet.

ULTRA REFLECTIVE POLYCARBONATE LENS - The amber 2.5" round LED side marker uses a specially designed polycarbonate lens to reflect back direct light, allowing your tractor or trailer to be more visible at night and providing a safer driving experience for you and other drivers on the road. The round LED side marker also comes with a “TOP” orientation, designed to allow you to uniformly install multiple units, while maximizing the amount of reflectiveness from each lens.

2 IN 1 FUNCTIONALITY - Driving a tractor, trailer, truck, or any other large vehicle mandates that you drive with side marker lights and reflectors depending on the size of your vehicle. The LED clearance light comes with 13 high powered LEDs, allowing it to serve as both a reflector and clearance light that federal law requires for larger trailers. This LED clearance light is also D.O.T FMVSS-108 compliant.

WATERPROOF, SUBMERSION READY - The waterproof IP67 rated LED side markers are fully capable of being submersible. This makes the clearance light ideal for boat trailers that launch and pick up watercraft into the water.

TRUE PROTECTION - LEDs are the long-lasting clearance light option. But if your trailer lights aren't truly waterproof, your LEDs may not be as long-lasting as you think. Submersible and IP67 rated, our amber and red clearance lights go the distance.

STAY ON BUDGET - Clearance and marker lights may be small, but if you're doing a major refit, the costs can quickly add up. Our single LED clearance lights are a budget-friendly option that goes easy on your bottom line without going easy on quality.

LOOK GOOD - Practical doesn't have to mean plain. For these lights, staying on budget and looking good are the same thing. With a unique chrome bezel, our single LED clearance lights stand out from the crowd.

MINIMIZE DOWNTIME - Time in the garage is time off the road. With a standard 3/4" size, no-screw grommet install, and pre-attached .180" bullet connectors, these lights install quickly and get you out of the garage and back on the road faster.

MAXIMIZE UPTIME - Finding blown marker lights on a pre-trip inspection can mean the loss of valuable time on the road. By switching to long lasting red LED lights you reduce failures, minimize service times, and keep your schedule running on time.

STAY ON BUDGET - Our red lights are PC-rated. That means it produces an 180 degree arc of light, and when installed on the 45 degree corner of a truck or trailer, functions as a both a clearance and side marker light. Two for the price of one.

Package includes 30 pieces 3.8" Inch Led Trailer Lights 6LED (10Pcs Amber + 10Pcs Red + 10Pcs White); free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on; We also have customers asking whether they can be use as turn signal lights, brake lights or backup lights, they can, but they may be not that bright;

Partsam (5 x Red) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Red Lens, Reflex Lens

12 Volt; Flush Mount; 4LED; Kit includes grommets and pigtails for complete installation; Sonically sealed, waterproof housing and lens unit is submersible

Round trailer light serves as either a side marker light or a clearance light; LEDs make great replacements for incandescent lights;

Round Red Led marker Lights w Reflector -- Clear Lens. White Wire is the GROUND and Black is positive. DRILL a hole about 2-1/4" to install it;

Color: Red Light / Clear Lens. Each unit Built-in High Power Super Bright Flux 9 leds Lights.

Commonly used on Commercial Vehicles such as Peterbilt/ Freightliner/Kenworth, Heavy Duty Trucks, travel trailer, horse tariler, camper trailer, cargo trailer, motorhome, RV etc.

Partsam (2 x Amber & 2 x Red) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber/Red, Reflex Lens

12 Volt; Flush Mount; 4LED; Kit includes grommets and pigtails for complete installation; Sonically sealed, waterproof housing and lens unit is submersible

Round trailer light serves as either a side marker light or a clearance light; LEDs make great replacements for incandescent lights;

Package includes 20 pieces 3.8" Inch Led Trailer Marker Lights 6LED Amber Lens; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Amber Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on; We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright;

Package includes 10 pieces 3.8 Inch Blue Led Trailer Marker Lights 6LED; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the blue marker lights or to the surface to which the blue light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam blue led lights function as marker lights, clearance lights, runnling lights, side marker lights, license plate lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light,cockpit light, step lights, deck lights, trailer lights, led courtesy lights, stern light, stair lights, truck lamps and so on; Truly many customers use them as boat marine lights, very bright;

Package includes 10 pieces 3.8 Inch Amber Led Trailer Marker Lights 6LED; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the amber marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Amber Led Lights function as marker lights, clearance lights, runnling lights, side marker lights, front parking lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps and so on; We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright;

Includes 2 Stud-Mount Tail Lights with Red Side Marker

2 amber side markers

license bracket

This listing features for 5 Pieces 2 Inch round amber led marker lights and 5 Pieces 2 Inch round red led marker lights. These 2 Inch led marker lights are flush mounts to trailer trucks with rubber grommets and standard 2-prong wire pigtails;

These 2 round led marker lights include grommets and pigtails for complete installation; Each 2 inch round trailer marker light come with 4 LEDs, providing you better visability when driving on road; Sonically sealed, IP67 waterproof housing and lens unit is submersible;

Wiring tips: Each 2 inch round trailer side marker lights includes a standard 2 prong wire pigtails: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights) , you may need to drill a hole about 2-5/16" to install;

Brand : TMH with 5 years Premium TMH warranty ( Free Replacement )

10pcs 12v - 24v DC ( Multi-Voltage ) 5 RED + 5 Amber Side Marker indicator light with Chrome Bezel

Brightness : 150 lumen each light with 4 pcs High Brightness SMD LED specialy made for TMH ( view angle 120 degree )

Super Bright: Each 2 inch round led marker light come with 4 LEDs, high visibility in daylight, midnight, raining or fog days. Improve the driver security and avoid accidents.

Waterproof and Submersible: The housing is design of fully Sealed Components and IP 67 waterproof makes it be definitely waterproof and submersible. Works perfectly in any weather condition

Compliant with DOT standards: The lamp shade of side marker light with corrosion resistant ABS material, Durable design for years of use. 100% compliant with DOT standards

Trailer Truck LED Sealed 2inch Round Clearance Side Marker Lights (10X Amber) with Grommet and Pigtails.

Simple installation: 2-WIRE, White is ground, Black is positive. Dimensions: Outer Diameter: 2.5"in, Inner Diameter: 2"in, High Diameter: 0.75in. (W/ Grommet); Recessed mount with included black grommet, you can drill an approx. 2-5/16" hole and Includes industry-standard 2-prong plug with pigtail.

Universal fit for any Vehicles with DC 12V, Such as Semi Truck & Trailer, Bus, Service Van, Utility Truck, Pick Up Truck, UTE, UTV.

Brand : LEDVILLAGE with 2 years Premium warranty ( Free Replacement )

4pcs 12v - 24v DC ( Multi-Voltage 10v-30v ) Red Lens Red Light Side Marker indicator light with removable Chrome Housing Bezel

Brightness : 500 lumen each light with 9 pcs High Brightness SMD LED specialy made for LEDVILLAGE ( view angle 120 degree )

2.5" side marker with reflective lens and patented and ultra-efficient lens that leads the world in performance over 100,000 hours

Standard non-polarized connector, dimensions: 2.5" x 0.65", voltage: 9 - 14V DC and current: 0.06A

Waterproof, sealed body that is immune to shock and vibration and completely submersible

Brand : TMH with 5 year Premium TMH warranty ( Free Replacement )

4 pcs 12v - 24v DC ( Multi-Voltage ) 2 pcs Red + 2 pcs Amber Side Marker indicator light with Chrome Bezel

Brightness : 150 lumen each light with 4 pcs High Brightness SMD LED specially made for TMH ( view angle 120 degree )

Rectangle LED trailer lights (2) Amber 3/4" Side marker lights.

Right light has 18 LEDs (12 face, 6 side);Left/streetside light has 22 LEDs (12 face, 6 side, 4 bottom).

Submersible trailer lights are each 8" x 2-3/4"; Side marker lights are each 1.05" diameter x .5" depth, (fits in 3/4" hole).

Trailer Truck LED Sealed 2inch Round Clearance Side Marker Lights (10X Red) w Reflector

Each 2inch red led marker light has 9 Diodes and brings you powerful brightness & make them a popular choice for drivers with limited space but a desire to be seen and also Miro-reflex faceted reflector provides increased light output with a contemporary appearance

Universal fit for any Vehicles with DC 12V, Such as Semi Truck & Trailer, Heavy Duty Trucks, travel trailer, horse trailer, camper trailer, cargo trailer, motorhome.

BRIGHTER LIGHTS & SAFER: The high intensity LED side marke light with effective reflex reflector, high visibility in daylight, midnight, raining or fog days. Improve the driver security and avoid accidents

Waterproof and Submersible: The housing is design of fully Sealed Components and IP 67 waterproof makes it be definitely waterproof and submersible. Works perfectly in any weather condition

Compliant with DOT standards: The lamp shade of side marker light with corrosion resistant ABS material, Durable design for years of use. 100% compliant with DOT standards