Best Electric Space Heaters in 2026

30,000 BTU Natural Gas heater to heat spaces up to 1000 square feet

Blue flame burner for even convection heat. Maximum Elevation (Ft)-4500. Fuel Consumption/Burn Rate (Gal/Hr)- .030 MCF

Automatic low oxygen shut-off system (ODS). CSA Certified. Heater Type: Unvented

Safe, clean burning heat

Operates without electricity during power outages

Built-in oxygen shut off sensor and adjustable thermostat

10,000 BTU Natural Gas heater to heat spaces up to 250 sqaure feet.

Radiant heat burner

Automatic low oxygen shut-off system (ODS). CSA Certified

Endless Hot Water: Enjoy unlimited hot water flow throughout the house; compact, durable, and easy to install; professional installation recommended

Energy and Space Efficient: Space-saving design conserves energy as it heats only when necessary.

Optimal Water Pressure: High-performance up to 5.3 GPM hot water flow rate for a powerful, constant stream

Installation Guide. We recommend that all installations must in accordance with the local building and plumbing codes of the installation location, install the hot water heater by a licensed professional plumber.

Instant Hot Tankless Water Heater. Camplux advanced 6.86 GPM high capacity natural gas tankless water heater delivers 6.86 gallons per minute of on-demand endless hot water. It is suitable for 3-4 outlet points, which can satisfy whole family.

Easy Installation. It won't take up your indoor space, keeping your home more airy and having a more comfortable living experience. The tankless water heater includes digital remote control with a 3.3 feet cable for convenient flow control.

This is the perfect outdoor heating solution, featuring a weatherproof rating of IP35

Safer and cleaner to use. Does not output CO2 like propane or natural gas heaters that burn fossil fuels. No dangerous tanks, no plumbing and no ventilation needed. Mount horizontally or vertically

6.5 foot long three pronged cord. This comes with a 1 year manufacturer warranty

2.64 GPM Instant Hot Water -Camplux 2.64 GPM natural gas tankless water heater delivers 2.64 GPM on demand endless hot water ensures instant hot water for any small homes, cabins or apartments. On demand water heater only heats the water when you need it and no waiting for preheat.

6-IN-1 Multiple Protection- Flame-out protection, anti-freezing protection （manual drainage needed）, over-heating protection, air flow pressure switch protection to ensure the safety. Safe electronic ignition system, plugs into standard 120V electrical outlet with UL-listed cord.

Easy Installation -The tankless water heater uses standard 1/2" BSP water fitting and gas inlet. The water heater comes with 1/2 " BSP female to 1/2" NPT male gas connector adapter then you want hook this water heater to natural gas pipe directly.It also comes with 2" horizontal vent pipe,ensures efficient power ventilation. Minimum activation rate: 0.65 GPM; Maximum input rating: 68,000 BTU; Water connection location/size: Bottom/0.5-inch NPT.

HIGH QUALITY----Our patio heater reflector shield is made with high grade aluminum. It is not easy to rust and is resistant to high temperatures.

FIXED DIRECTION----The patio heater reflector shield redirects the heat in the direction you want. Won't waste extra heat.You will use less energy to enjoy the perfect amount of warmth.

PROTECT HEATER----The patio heater reflector shield reduces invasion from rain and wind, extend the service life of a space heater. And the heat focusing reflector redirects heat where you want it, block heat protects trees and walls from unwanted.

17,000 BTU heat input heats up to 570 sq. ft.

Designed for use with natural gas

Sealed burn system is perfect for bedrooms and living spaces

【Outdoor installation to save space】The product is installed outdoors and does not occupy the living space. The bottom built-in forced DC fan eliminates the influence of external wind. So as to ensure the stability of combustion, achieve safety, energy saving and no pollution. We recommend that all installations are carried out in accordance with local building and plumbing codes by licensed professionals.

【Endless water supply without preheating】The heat exchanger quickly heats the water to a maximum of 140°F, which is ready for use without waiting for hot water. It can run at approximately 6.3 GPM for 40 minutes, enough to produce almost 240 gallons of hot water. Make a multi-point water supply for the whole house to meet your family's water needs.

【Precise temperature control and stable temperature】Equipped with a wire controller cord length of 164ft, allowing you to control the water temperature indoors. The burner can be burnt in sections to meet the water temperature demand in the four seasons. Benefiting from the calculation and control of the heating power 1000/s by the chip, the temperature difference of the water can be precisely controlled within ±2°F.

Energy and Space Efficient: Space-saving design conserves energy as it only heats when necessary; multiple venting options offer installation flexibility

Optimal Water Pressure: High-performance 11 GPM hot water flow rate for a powerful, constant stream

Instant Heating: Circ-Logic technology enables recirculation patterns that coincide with your typical habits; Wi-Fi monitoring creates hot water on demand

Hot water without the wait - or the waste

Low operating cost - High energy efficiency and water savings setting

Space Savings - Compact, space-saving design. Perfect for a tank replacement.

30,000 BTU/hr. - heats up to 1,000 square feet, Electronic spark ignition

Blue flame technology works by convecting heat to warm the air the same way as a central heating system, Thermostat control knob automatically maintains your IDEAL heat level

Features an oxygen depletion sensor and an auto safety shut-off, No electricity required allows for reliable back-up heating incase of an emergency situation

Heats up to 825 sq. ft. with up to 25,000 BTU heat input

Designed for use with natural gas

Sealed burn system is perfect for bedrooms and living spaces

Dual fuel technology (Propane or Natural Gas) - infrared technology - 12,000 BTU/hr. - heats up to 300 square feet

Electronic spark ignition, Thermostatically controlled.

99.9% efficiency

10,000 BTU Natural Gas heater to heat spaces up to 300 sqaure feet

Blue flame burner for even convection heat.

Automatic low oxygen shut-off system (ODS).

【Outdoor installation to save space】The product is installed outdoors and does not occupy the living space. The bottom built-in forced DC fan eliminates the influence of external wind. So as to ensure the stability of combustion, achieve safety, energy saving and no pollution. We recommend that all installations are carried out in accordance with local building and plumbing codes by licensed professionals.

【Endless water supply without preheating】The heat exchanger quickly heats the water to a maximum of 140°F, which is ready for use without waiting for hot water. It can run at approximately 5.1 GPM for 40 minutes, enough to produce almost 200 gallons of hot water. Make a multi-point water supply for the whole house to meet your family's water needs.

【Precise temperature control and stable temperature】Equipped with a wire controller cord length of 164ft, allowing you to control the water temperature indoors. The burner can be burnt in sections to meet the water temperature demand in the four seasons. Benefiting from the calculation and control of the heating power 1000/s by the chip, the temperature difference of the water can be precisely controlled within ±2°F.

REFURBISHED: This is Certified Refurbished Heater but includes all original accessories as like as new.

TECHNOLOGY - Maximum 30,000 BTU Vent Free Infrared Gas Space Heater using Natural Gas only Which Heats up to 1, 450 sq. ft Area.

DEPENDABLE - Thermostat Control – The control automatically cycles the burner on and off to maintain a desired room temperature, Ideal for greater heat flow that could add the warm atmosphere in your room.