Best Plastic Stereo Jack Cables in 2026

Tisino 1/8” Stereo to Dual 1/4“ Mono Cable, this cable is designed to connecting your smartphone, portable media player, laptop/PC or similar device with a 3.5mm mini jack output to a device with 2 x 6.35 mm jack inputs such as speakers, mixing console and so on.

This cable can be used to split a 3.5mm unbalanced stereo signal into two 1/4" TS(left/right) unbalanced mono signals, or to combine two 1/4" mono signals(left/right) into a single 3.5mm stereo signal. It splits closer to the 1/4 TS ends, the distance to the split point is about 19.8 inches(50 cm).

20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers.

This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.

High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound.

Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise.

XLR Female to 1/4 TS Mono Jack Microphone Cable, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices: Microphones, Audio Sound Consoles, Power Amplifier, Stereo System, Wireless Microphone Receiver ,etc.

High strength aluminum alloy die-cast housing, Gold plated connections, Oxygen-free copper core to deliver pristine sound.

The XLR connector is a high quality metal shielded type with positive locking into the microphone; The 6.35mm or 1/4 inch jack plug is a high quality metal type with shielding and anti stress spring.

This RCA to 1/4 cable is designed to connect a channel insert on a mixing console to an effects processor with phone jacks; Connecting any devices with 6.35mm (1/4’’) audio ports to AV Receiver, speaker, amplifier and other RCA-enabled devices;it can be used as a stereo "splitter", or as a "insert" cable to add an outboard mono effects device (with unbalanced RCA input and output jacks) to an effects loop.

This quarter inch to rca cable can be flipped around, 2 RCA or 6.35mm could all be the audio input, RCA to Stereo or Stereo to RCA;It splits closer to the rca ends, the distance to the split point is 20 inchs/50cm, the red connector is right and blue connector is left.(Note:if you're input is red and white then use the blue in place of the white)

High quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion resistant, 20 AWG 4N oxygen free copper wire combined with double shielding for best audio quality, excellent signal quality.

Unbalanced 3.5mm(1/8 inch) to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers; Connect a smartphone with a headphone jack to XLR input; Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in)

This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram)

XLR male connector has molded strain relief to support the weight of the cable; 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports.

This mono to stereo adapter cable is designed to split a mono signal from a 1/4" output into both channels (left and right channel) of a 3.5mm input, It could be used to connect a mixing console, guitar amp, bass, mono radio to a portable media player, cell phone, laptop, recording device, or similar device.

This 1/4 mono to 3.5mm stereo cable only used as a mono (output) to stereo (input) connect, if it used as a stereo (output) to mono (input), this could burnout the stereo output stage of the device. The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter.

Heavy Duty Gold-plated connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss.

These 1/8 to XLR Cables are Designed to Split a 3.5mm Aux Balanced / Stereo output Signal into two Unbalanced / Mono XLR input Signals (Left and Right Channels), They are ideal for connecting your Smartphone/ PC / Laptop to a Mixer/Speakers or similar device.

The XLR connectors are color-coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 19.6 inches(50 cm). The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipment is "OFF" when changing connections.

XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity

Unbalanced 3.5mm to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers; Connect a smartphone with a headphone jack to XLR input; Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in)

This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram)

XLR male connector has molded strain relief to support the weight of the cable; 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports.

This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.

High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound.

Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise.

This mono to stereo adapter cable is designed to split a mono signal from a 1/4" output into both channels (left and right channel) of a 3.5mm input, It could be used to connect a mixing console, guitar amp, bass, mono radio to a portable media player, cell phone, laptop, recording device, or similar device.

This 1/4 mono to 3.5mm stereo cable only used as a mono (output) to stereo (input) connect, if it used as a stereo (output) to mono (input), this could burnout the stereo output stage of the device. The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter.

Heavy Duty Gold-plated connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss.

XLR Female to 1/4" TS Mono Jack Microphone Cable, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices: Microphones, Audio Sound Consoles, Power Amplifier, Stereo System, Wireless Microphone Receiver ,etc.

High strength aluminum alloy die-cast housing, Gold plated connections, Oxygen-free copper core to deliver pristine sound.

The XLR connector is a high quality metal shielded type with positive locking into the microphone; The 6.35mm or 1/4 inch jack plug is a high quality metal type with shielding and anti stress spring.(Note:This is 1/4 inch plug,can not fit for phone and couputer)

These 1/8 to XLR Cables are Designed to Split a 3.5mm Aux Balanced / Stereo output Signal into two Unbalanced / Mono XLR input Signals (Left and Right Channels), They are ideal for connecting your Smartphone/ PC / Laptop to a Mixer/Speakers or similar device.

The XLR connectors are color-coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 19.6 inches(50 cm). The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipment is "OFF" when changing connections.

XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity

These 3.5mm to XLR Cables are Designed to Split a 3.5mm Aux Balanced / Stereo output Signal into two Unbalanced / Mono XLR input Signals (Left and Right Channels), They are ideal for connecting your Smartphone/ PC / Laptop to a Mixer/Speakers or similar device.

The XLR connectors are color-coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 19.6 inches(50 cm). The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipment is "OFF" when changing connections.

XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity

Unbalanced 3.5mm(1/8 inch) to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers; Connect a smartphone with a headphone jack to XLR input; Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in)

This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram)

XLR male connector has molded strain relief to support the weight of the cable; 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports.

This xlr to 3.5mm cable is designed to connect two microphones (left channel Right channel) with XLR outputs to a mini stereo phone input. It is ideal for connecting pro mics to digital cameras, video cameras, tape recorders, and other professional audio equipment with 1/8" mini-stereo jacks.

The XLR connectors are color-coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 20 inches/50cm. The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipment is "OFF" when changing connections.

XLR Connector with internal strain relief for rugged reliability, Oxygen-Free Copper (OFC) conductor for enhanced signal clarity

BALANCED XLR Female to 1/8 cable connects a shotgun or condenser mic with a male XLR connector to a DSLR, DV camcorder, digital voice recorder or computer with a mini-jack port

This is a balanced cable, the tip and ring have continuity with pins 2 and 3 respectively. This is NOT an unbalanced Mono cable, nor is it a stereo cable. this cable carries a balanced mono signal into an unbalanced stereo input

20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity.great choice for music lover

BALANCED XLR male to 3.5mm stereo TRS cable is commonly used on a cell phone, MP3 player, tablet, laptop, or any 3.5mm audio output to a mixing console or powered speakers.

This is a balanced cable, the tip and ring have continuity with pins 2 and 3 respectively. This is NOT an unbalanced Mono cable, nor is it a stereo cable. this cable carries an unbalanced stereo signal into balanced mono input. NOTE: It would work fine for a mono balanced 1/8 line to xlr, if it works at a stereo source to the mono mic input, there requires some sort of summer/transformer or a balance receiver and transmitter.

20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity.great choice for music lover

1/4 stereo to dual 1/4 mono cable, This is an insert cable, generally used for audio consoles or other preamps that have a send/return on the tip/ring of a 1/4" TRS jack. It's a way to insert a component (like a compressor, EQ, etc.) directly inline with a preamp by using a single 1/4" jack.

This "Insert" cable intended primarily for mixing/effects insertion applications, but it also can be used as a "Stereo Breakout Cable" since it is wired exactly the same way as a stereo breakout cable.This cable can also be used to split an unbalanced stereo signal into two unbalanced mono signals, or to combine two mono signals into a single stereo signal.

The 1/4 TS connectors are color coded Black(Left/Send) and Red(Right/Return), It splits closer to the 1/4 TS ends, the distance to the split point is about 7.5 inches. Please make sure the power for all your equipmant is "OFF" when changing connections.