Best Yonico Straight Router Bits in 2026

🔧 KOWOOD 35 pcs set is a common variety to cover most woodwork needs

🔧 C2 Carbide for clean and accurate trimming, edging, grooving for all type of wood material

🔧 This 35 pcs set is the most cost-effective sets. Ideal budget for beginner

▲ DURABLE STEEL BODY - Boasting alloy blade, balanced craftsmanship and a solid hardened steel board these woodworking tools can withstand some heavy duty use and the test of time. Their clever anti kickback design ensures safe installation

▲ USE OF SAFE - The 1/4 inch shank bits provide greater stability and less vibration during use. Clamping to at least the “K” line, the short clamping of this product might cause bend

▲ WIDELY APPLICATIONS - These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. ▲DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc▲

Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits

Flush trim templates and patterns for a wide variety of projects

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

For use on table mount and handheld router

Specs: Number of Cutters 2, Overall Dia. 3/4", Overall Length 2-1/8", Shank Dia. 1/4", Carbide Height 3/4"

Freud Tico Hi-Density Carbide

Clean cuts in solid wood, plywood and composites

5PCS Solid Carbide spiral router bits with 1/4inch shank and 1/8inch cutting diameter, 1/2 inch cutting length, 2 inch for total length

Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and bottom surface, better than straight bits

CNC bits For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Specs: Number of Cutters 2, Overall Dia. 1/4", Overall Length 2-1/2", Shank Dia. 1/4", Carbide Height 1"

Chip free cuts on top surface of laminates and veneer panels

Use in CNC, hand-held and table-mounted routers

WOOD ROUTER BIT SET - Tungsten carbide router bits for woodworking include flush trim router bit contain a 1/2" diameter shank and 3/4" inch dia. bearings. Top and Bottom Bearing Router Bit is great for all your large stock trim applications.

C3 CARBIDE CUTTERS – All of our router bits use premium C3 carbide cutters manufactured from C3 micro grain tungsten carbide. C3 carbide is the highest grade used in router bit manufacturing. Carefully ground to a smooth 600 grit mirror-like finish.

CLEAN SPLINTER FREE CUTS - Yonico router bit sets feature high hook and shear angles, allowing cutters to slice smoothly into stock resulting in clean and splinter free cuts that are devoid of burn marks. Use on CNC routers or table-mounted routers.

1/4 inch shank professional straight router bit set, Blade Material: YG6 carbide; Body Material: 45# carbon steel.

Cutting Diameter: 1/4", 5/16", 3/8", 1/2"; Cutting Height(Approx.): 13/16"(20mm), 1"(26mm), 1-3/16"(30.7mm), 1-3/16"(30.7mm).

Surface paint, preventing the accumulation of wood chips, resin and asphalt.

✔【PERFECT SIZE TRIM ROUTER BITS】- Its Shank: 1/4inch, Cut Length: 1inch,NOTE:When using, pay attention to the thickness of the board not to exceed 28mm

✔【INDUSTRIAL QUALITY ROUTER BITS】- The router bits is made of Solid Carbide(using the upgrade material), with C3 Micro-grain Tungsten Carbide Cutters. Industrial quality router bits provide precise, efficient cuts and offers extreme durability.

✔【DOWN-CUT SPIRAL ROUTER BITS】- The flush cut router bit redesigned with permanent bearing retaining collar to reduce trimming mishaps.

This Top Bearing Ultra-Perfomance Up Cut Flush Trim Router Bit is constructed from solid carbide and has a 1" cutting length and a 1/2" diameter with an overall length of 2-3/4" and a 1/4" shank.

Flush trim endgrain of any direction for a perfect finish

High performance C3 micro-grain solid carbide sleeve, polished to a mirror finish

Downcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The down-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches. Up to 2.5X longer life compared to uncoated bits.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and top, better than straight bits.

This bit has a cutting diameter of 3/8" and a cutting length of 1". Perfect for making dado grooves and all types of straight cut work. 1/4" shank.

Route dados and straight cuts for joinery and general use

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

Specs: Number of Cutters 2, Overall Dia. 3/4", Overall Length 2-1/2", Shank Dia. 1/2", Carbide Height 1"

Freud Tico Hi-Density Carbide

Clean cuts in solid wood, plywood and composites

This O-flute bit has a cutting diameter of 1/4", cutting height of 3/4", overall length 2-1/2" and 1/4" shank.

For CNC milling and routing on aluminum and plastics where a clean top surface edge of material is required

Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool